Joset Designs

Feather Trio

March 19, 2017

By Els van de Burgt

 It’s been a long while since I’ve been the guest designer on our blog. It’s fun to be in my studio for two whole weeks instead of on the road. Today’s project is my way of celebrating the new Feathers die set as well as Tim Holtz’s brand new Distress Oxide inks – a great combo!

The Distress Oxide inks are just amazing. I love how they respond with water, how you can combine colors without messing up, and how easy it is to get terrific results. I used them for a spattered looking background on my card as well as for the banner and feathers.

Here is the how-to:

  1. Prepare three 4.25” x 5.5” pieces of Distress Mixed Media Heavystock as follows:
  • Piece One – with Fossilized Amber Only for the banner. (You’ll have leftover scraps.)
  • Piece Two – Walnut Stain, Vintage Photo and Fossilized Amber for the background.
  • Piece Three – Spiced Marmalade, Fired Brick, Walnut Stain, Vintage Photo and Fossilized Amber for the feathers.

Technique for all three: Press ink pad or pads onto the non-stick craft mat. Spritz with water (I used Tim’s Distress Sprayer), then lightly touch the paper onto the ink to pick up the color. No need to press, the color jumps up onto the Heavystock like magic! Repeat until you like the results. Spray water directly onto the Heavystock or the craft mat if you want to disperse the color a bit more. Or not! It’s all good. Air dry or use a heat tool.

  1. Die cut three feathers out of the Piece Three. Die cut the second-smallest Stitched Fishtail Banner out of the Piece One. Die cut the same banner a second time out of black cardstock. Set aside Piece Two until step 6.

  1. Stamp dots onto the feathers using black ink. Fill in the dots with a white gel pen. Use a black Pigma Micron 005 pen to accent the spine of each feather. Drag the edges of the feathers onto the clear inkpad, add gold embossing powder and heat set.
  1. Using black ink stamp ‘believe’ onto the banner close to the V-cut end. (Refer to project photo.) Trim the banner down to 2”. Also trim the black cardstock banner to the same length.
  1. Make a Dark Goldenrod Soft Finish Cardstock A2-size top-fold card base (8.5” x 5.5”, scored at 4.25”, folded in half).
  1. Wrap a piece of twine around Heavystock Piece Two (set aside in step 2). Secure the ends to the back with tape or a dab of glue. Attach the 3 feathers, evenly spaced, toward the left side of the card front, using a bit of Beacon Kids Choice down the middle to secure them and a small blob of the glue at the top of each one for added dimension. Allow glue to dry.
  1. Pierce a hole for a brad at the top of each feather. Add the brads.
  1. Adhere the black Stitched Fishtail Banner and the stamped Stitched Fishtail banner, overlapping and offset so there is a black dropped shadow, using Clear Double Sided Adhesive Tape.
  1. Adhere the card front to the card base using the same tape.

SUPPLIES

Elizabeth Craft Designs:

 1272 Feathers

1329 Stitched Fishtail Banners

CS036 Jungle Cuties Clear Stamps

CS024 Dream Sentiments Clear Stamps

Soft Finish Cardstock in Dark Goldenrod

Clear Double Sided Adhesive Tape 6mm

Beacon Kids Choice Glue

 

Ranger: 

Tim Holtz Distress Oxide Inks –

Fossilized Amber

Spiced Marmalade

Fired Brick

Vintage Photo

Walnut Stain

Tim Holtz Distress Mixed Media Heavystock

Tim Holtz Distress Sprayer

Jet Black Archival Ink

Heat it Craft Tool

Non-stick craft mat

 

Sakura:

Gelly Roll Medium in White

Pigma Micron 005 in Black

 

WOW:

Metallic embossing powder in Rich Gold

Clear Ultra Slow Drying Ink Pad

 

Other:

Black cardstock

Brads

Twine

Awl or piercing tool

You Might Also Like

8 Comments

  • Reply Dottie March 24, 2017 at 3:36 pm

    Just awesome male card esp. Just got mine today so your feathers will be my first fly into the oxide zone!

  • Reply Patricia Howarth March 21, 2017 at 12:44 pm

    Hi Kaitlin, Wow !! this is stunning, I love your techniques.
    Lots of love from Patricia xx

  • Reply pattie hillenberg March 20, 2017 at 12:43 am

    Very nice …love the colours….can’t wait till my fav s/booking shop gets these inks in…. Joybells @ Landsbourgh on the Sunshine Coast…Australia. ….there are only 2 shops left here so I’d rather support them than go online even though they have one also….I love to touch things…lol

  • Reply Linda K March 19, 2017 at 9:17 pm

    Excellent feathers

  • Reply Nancy Yoder March 19, 2017 at 11:43 am

    Bravo! Love this card! Love to hear ur home! Loved the gold embossed feather tips! Love the new oxide ink pads! So to sum it all up…bravo!!!

  • Reply Joan B March 19, 2017 at 11:19 am

    Very nice. I hope to get my new inks soon. Love feathers and I especially love these feathers

  • Reply afmmac March 19, 2017 at 11:11 am

    What a beauty. Fantastic background and LOVE those feathers.

  • Reply Tona March 19, 2017 at 10:49 am

    I love everything about this card!

  • Leave a Reply

    %d bloggers like this: