Els Schutte

• Hi Everyone, It’s Els here and mit is my turn to give you some inspiration so I came up with a nice Fall jewelery set, below you find the step by step instructions, have fun creating this!

• Cut 2 small and 1 big leave out of Shrink plastic

• Color the rough side of the leaves with Ink in the colors you like I used yellow, orange, green and brown, after coloring you make a hole in the biggest leave.

• Take the heatgun and hold it close to the leave it will schrink, when it is done place a stamping block on it to keep it flat.

• Here they are done all 3 of them.

• Place some glue on the outsite and on places where you like the gold, then cover it with the gold leave.

• Take a brush and get rit of all the loose gold leave, it will stay where you placed the glue.

• Take a ring and pull it through the little hole for a neckless, and glue the studs for the earring on the back of the leaves.
• So Ready to go enjoy your little piece of Art you made.

• Materials:
• ECD Maple Leaves die set.

• Other Materials:
• Ink: orange,yellow,green,brown, hole punch, heattool, ear studs, ring, gold leave, glue.

Hi Everyone, where almost getting into the Fall, my favorite season, love the smells and the colors, it is my turn today to give you some inspiration and this time I thought pumpkins would be a great idea, below you find the step by step instruction, have fun!

• Cut the bucket 2 times, the spiral flower 3x, the leaves 3x and all the flowers 2x

• Place them as seen on the picture

• Now glue them together, and cut the bottom part a bit in a pumpkin shape.

• Cut 1 flowerpot in half and use the top part, then color them.

• Color the pumkins with yellow, orange, red and brown ink

• Color everything as on the picture, I also put some glossy accent on the pimpkins to give it a shine.

• Roll up the flowers, shape the leaves, cut a black card ad 8 1/2 x 9 and fold in half so the card will be 8 1/2 x 4 1/2 then a piece of pattern paper of 41/4 x 81/4 distress the edges and Ink them and glue this on top of the black card, then start building the card start with the pots and place a pumpkin inside.

• Place some moss in the pots and adhere 3 flowers on top of it, stick some leaves behind the flowers too.

• Now start building a tower with pumpkins, I placed a little caterpillar on 1 of the pumpkins.

• I hope you like it and that you will give it a try, have fun creating this!

• Product I used:
• Elizabeth Craft Designs dies:
• Florals 17
• Florals 19
• Florals 9
• Flowerpot/Bucket

• Other products
• Moss
• stamp caterpillar
• Ink Orange, yellow, Green, Brown, Red
• Black fineliner

In the Friday Live show with Els there was a question if we have a Floral die where we can make an Orchid with, so this is where I came up with…………and I promised to do a step by step blogpost so here it is!

I used the Florals dies nr: Florals 4 Florals 12 florals 18 Florals 16

So this was the example I made and the next one with the frame we are making!

We are making a double frame and on top I combine the orchids with some other flowers.

Cut everything you see here and cut 5 of each flower and 4 of the stamens

Take the bigger flowers and cut 2 petals off so you have 2 left on the top and 1 on the bottom.

Take the light Green Ink and ink the big flowers in the center, put Yellow on the tiny ones in the center.

Color the stamens Green.

Put your tweezer on the bottom and fold the petal around it.

Shape these flowers on the back, then turn them and press in the center.

Take the tiny flower and fold the top 2 petals inside up and the bottom one to the back, put tiny orange dots on them.

Now glue all the 3 flowers on top of each other see the photo.

make all 5 of them and put some yellow flocking powder in the center.

Glue the stamens together.

Glue the flowers on the stamens and put those extra knops on there aswell.

For extra I cut these flowers and leaves out , colored them and they go on the frame as well, I didn’t do this step by step because the frames Els did so you can check her live videos to see how to make a frame and then you can decorate it.

So I hope you liked this step by step tutorial for the orchids.

I used the next dies:

Florals 4 – 12 – 18 – 16 – 19 – 15 – Boxframe – ferns – Leaves

Hi Everyone It’s Els here and it is my turn again to give you some inspiration, I made some Blue Bells, I love these flowers they fit perfectly on a Spring or Mothersday card………..Below you find the step by step instructions to make this card, You also can use it for a birthday card. Have fun creting this!

• Cut out several flowers from the Florals 10, I used the small and 1 size up, I used 8 big ones and 6 small ones, then color all the flowers with Blue Ink.

• Take 2 stamens, fold them double and put a wire around it and twist it, pull this in to the hole of the flower

• Fold the petals up

• Bent the top of the petals back with a tweezer.

• For the smaller flowers I cut the stamens very short. they stick out a bit.

• Wrap flowertape around the wire.

• Start on the top and place the flowers one by one on the wire with the flowertape.

• Make 2 of them.

• Cut the flowers from Florals 14 2x and color them green, then shape them.

• Stamp the fairy with the Blue Bells and color the background. The Card is 51/2 – 71/2

• I made a moon with a template and splatter some waterdrops on it.

• Connect the stem with floraltape and glue them on your card. Put the leaves on the bottom.

• Used Materials:
• Elizabeth Craft Designs dies Florals 14 for the leaves, Florals 10 for the Blue bells
• Other materials:
• Fairy stamp, Inks, glitter, White and black marker, stamens, wire, floraltape, white and black cardstock, template moon.

• I hope you liked the tutorial and give this card a try………….