Browsing Tag

6mm Clear Double Sided Adhesive

Elizabeth Craft Designs General Paper Flowers Soft Finish Cardstock

Fall Gift Box

September 8, 2021

Hey Crafters! Katelyn here, sharing with you my Fall Gift Box.

To create my gift box, I’ve used a variety of dies from the Paper Flowers Collection. You’ll want to read below as I share with you how to recreate my Fall Gift Box at home.

Step One. Die cut the Pizza Box from the Pizza Box Die out of a piece of kraft cardstock. Ink the edges of the pizza box using Walnut Stain Distress Ink and a blending tool with foam.

Step Two. Choose two pieces of patterned paper out of the Reminiscence the Book 2. You’ll also need the scalloped and stitched squares. Die cut the scalloped square out of one of the patterned papers. Die cut the stitched square out of the other patterned paper. Ink the edges of both squares using Walnut Stain Distress Ink and a blending tool with foam.

Step Three. Use the same pieces of patterned paper you just used for the previous step. You’ll also need the scalloped and stitched circles. Die cut the scalloped circle out of the same patterned paper you used to die cut the scalloped square. Die cut the stitched circle out of the same patterned paper you used to die cut the stitched square. Ink the edges of both circles using Walnut Stain Distress Ink and a blending tool with foam.

Step Four. Take out the patterned paper that the tags are on from the Reminiscence the Book 2. Fussy cut one of the labels out. Ink the edges of the label using Walnut Stain Distress Ink and a blending tool with foam.

Step Five. Choose another piece of patterned paper out of the Reminiscence the Book 2. Die cut the Lacy Leaves out of the patterned paper. Cut the leaf so one section has three leaves and the other section has two.

Step Six. From the Maple Leaves die, die cut the small and large leaves twice out of a piece of White Soft Finish Cardstock. Using a blending tool with foam, blend Wild Honey Distress Ink over one of the small and one of the large leaves. Using a blending tool with foam, blend Gathered Twigs Distress Ink over the remaining leaves.

Step Seven. From the Florals 10 die, you’ll need the extra large, large, medium and small flowers. Die cut one extra large, one large, three medium and three small flowers out of a piece of White Soft Finish Cardstock. Using a blending tool with foam, blend Fossilized Amber Distress Ink over the entire surface of all of the flowers.

Step Eight. From the Florals 10 die, die cut the flower centres once out of a piece of White Soft Finish Cardstock. You’ll need to choose three centres.

Step Nine. Assemble your pizza box.

Step Ten. Adhere the stitched square to the scalloped square. Foam square the scalloped square to the top of the pizza box.

Step Eleven. Adhere the stitched circle to the scalloped circle. Adhere the scalloped circle to the middle of the stitched square.

Step Twelve. Adhere the three leave bunch to the top left side of the pizza box. Adhere the two leaf bunch to the bottom left side of the pizza box.

Step Thirteen. Adhere a large brown leaf and a small orange leaf to the bottom left side of the pizza box, making sure that the previously adhere leaves are still showing. Adhere a large orange leaf and a small brown leaf to the top left side of the pizza box, making sure that the previously adhere leaves are still showing.

Step Fourteen. Adhere a medium and small flower together. Repeat the previous step for one more of the same flower bunch. Adhere the remaining flowers together. Adhere a centre in the middle of each flower bunch. Adhere the extra large flower bunch to the middle left side of the pizza box. Adhere the remaining two smaller flower bunches above and below the extra large flower bunch as desired.

Step Fifteen. Adhere the fussy cut label in the middle of the stitched circle, making sure that part of it slides underneath the flowers.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Fall Gift Box at home.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Wild Honey, Gathered Twigs and Walnut Stain
  • Blending Tool with Foam
  • Misc: Kraft Cardstock
Elizabeth Craft Designs General Joset Designs Paper Flowers Planner Essentials Soft Finish Cardstock

I Love You Tag

August 18, 2021

Hey Crafters! Katelyn here, sharing with you my I Love You Tag.

To create my tag, I’ve used dies from the Paper Flower Collection as well as dies from the Planner Essentials Collection and stamps from Joset Designs. You’ll want to read below as I share with you how to recreate my tag at home.

Step One. Choose a piece of patterned paper out of the Reminiscence the Book. From the Planner Essentials 30 – Wave Pocket Die, you’ll need the medium tag. Die cut the tag out of the patterned paper. Ink the edges of the tag using Walnut Stain Distress Ink and a blending tool with foam.

Step Two. Die cut the 2 1/2″ Stitched Circle from the Pizza Box die out of a piece of kraft cardstock. From the Build Your Own Sentiments Stamp Set, you’ll need the heart and I love You. Apply Jet Black Archival Ink the I love you sentiment and stamp on the right hand side of the circle as desired. Apply Jet Black Archival Ink to the heart and stamp below the I love you sentiment. Ink the edges of the circle using Walnut Stain Distress Ink and a blending tool with foam.

Step Three. From the Florals 10 die, you’ll need the large, medium and small flowers. Die cut the large flower once, the medium flower three times and the small flower three times out of White Soft Finish Cardstock. Using a blending tool with foam, blend Wilted Violet Distress Ink over the entire surface of each flower.

Step Four. Die cut both leaves three times each out of White Soft Finish Cardstock. Using a blending tool with foam, blend Mowed Lawn Distress Ink over the entire surface of each leaf. Shape the leaves as desired.

Step Five. Die cut one of the ferns from the Ferns die twice out of White Soft Finish Cardstock. Using a blending tool with foam, blend Forest Moss Distress Ink over the entire surface of both ferns. Trim the ferns down to your desired length.

Step Six. Foam square the circle 3/4″ from the left and 5/8″ from the bottom of the tag.

Step Seven. Adhere a fern and two leaves in the top left side of the tag. Adhere two leaves in the middle left side of the tag. Adhere the remaining fern and two leaves in bottom left side of the tag.

Step Eight. Adhere a small and medium flower together. Repeat this step for a second flower. Adhere the remaining flowers together. Add a black enamel dot in the middle of each flower. Adhere the two medium/small flowers to the bottom left and top left sides of the circle. Adhere the large flower in amongst the other two flowers as desired.

Step Nine. To finish the tag, tie a piece of twine through the top of the tag.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my I Love You Tag at home.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Forest Moss, Wilted Violet, Mowed Lawn and Walnut Stain
  • Blending Tool with Foam
  • Ranger Ink: Jet Black Archival Ink
  • Misc: Kraft Cardstock, Black Enamel Dots and Twine
A Way With Words Elizabeth Craft Designs General Joset Designs Soft Finish Cardstock

Good Luck Card

August 7, 2021

Hey Crafters! Katelyn here, sharing with you my Good Luck Card.

To create my card, I’ve used a variety of dies from Suzanne Cannon as well as Joset Designs. You’ll want to read below as I share with you how to recreate my card at home.

Step One. Choose two pieces of patterned paper out of the Reminiscence the Book. Die cut a 4 1/4″ Fitted Indented Rectangle out of one of the patterned papers. Die cut a 3 3/4″ Fitted Indented Rectangle out of the other patterned paper. Distress the edges of both papers. Ink the edges of both papers using Black Soot Distress Ink and a blending tool with foam.

Step Two. Choose two coordinating pieces of patterned paper out of the Reminiscence the Book. Die cut a 4″ Stitched Indented Rectangle out of one of the patterned papers. Die cut a 3″ Stitched Indented Rectangle out of the other patterned paper. Distress the edges of both papers. Ink the edges of both papers using Black Soot Distress Ink and a blending tool with foam.

Step Three. Die cut the Flourished Frame out of a piece of black cardstock.

Step Four. Die cut the Good Luck word once out of black cardstock and a second time out of a piece of White Soft Finish Cardstock.

Step Five. Adhere the 4″ rectangle to the 4 1/4″ rectangle.

Step Six. Foam square the 3 3/4″ rectangle to the 4″ rectangle. Adhere the flourished frame to the 3 3/4″ rectangle.

Step Seven. Foam square the 3″ rectangle to the middle of the 3 3/4″ rectangle.

Step Eight. Adhere the two Good Luck words together, making sure that a bit of the black Good Luck word shows behind the white Good Luck word. Adhere the Good Luck word to the middle of the 3″ rectangle.

Step Nine. Cut a cardbase out of White Soft Finish Cardstock that measures 4 1/4″ x 11″, score at 5 1/2″. Adhere the cardfront to the cardbase.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Good Luck Card.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Ranger Ink: Black Soot Distress Ink and Blending Tool with foam
  • Misc: Black Cardstock
Elizabeth Craft Designs General Joset Designs Paper Flowers Planner Essentials Soft Finish Cardstock

Oh Happy Day! Card

July 26, 2021

Hey Crafters! Katelyn here, sharing with you my Oh Happy Day! Card.

To create my card, I’ve mixed new and older dies from the Paper Flower Collection as well as dies from Joset Designs and stamps from the Planner Essentials Collection. You’ll want to read below as I share with you how to recreate my card at home.

Step One. Choose a piece of nature inspired patterned paper and die cut a 4″ Stitched Indented Rectangle. Die cut a 3 1/2″ Stitched Indented Rectangle out of a piece of White Soft Finish Cardstock. Distress the edges of both pieces. Ink the edges of both pieces using Walnut Stain Distress Ink and a blending tool with foam.

Step Two. Die cut a 3 3/4″ Fitted Indented Rectangle out of a piece of book page. Distress the edges of the rectangle. Ink the edges of the rectangle using Walnut Stain Distress Ink and a blending tool with foam.

Step Three. From the Pizza Box Die, you’ll need the large plain circle and the nesting stitched circle. Die cut the large plain circle out of a piece of book page. Die cut the stitched circle out of a piece of White Soft Finish Cardstock. From the Planner Essentials – Pieces of Life 4 – Retro Stamp Set, you’ll need the Oh Happy Day! sentiment. Apply Jet Black Archival Ink to the sentiment and stamp in the middle of the stitched circle. Distress the edges of both circles. Ink the edges of both circles using Walnut Stain Distress Ink and a blending tool with foam.

Step Four. Die cut the Lacy Leaves twice out of a piece of Rose Gold Foil Paper.

Step Five. Next, you’ll need the Florals 11 die. Die cut the leaves three times out of White Soft Finish Cardstock. Die cut the flower centres three times out of White Soft Finish Cardstock. You’ll need a total of two small centres and three medium centres. Die cut the large flower three times, the medium flower five times and the small flower five times out of White Soft Finish Cardstock. Using a blending tool with foam, blend Forest Moss Distress Ink over the entire surface of all three leaves. Using a blending tool with foam, blend Dried Marigold Distress Ink over the entire surface of all the flowers. Shape the leaves and flowers as desired.

Step Six. Adhere the 3 3/4″ rectangle to the 4″ rectangle. Foam square the 3 1/2″ rectangle to the 3 3/4″ rectangle.

Step Seven. Adhere the stitched circle to the plain circle. Foam square the plain circle 1/2″ from the left and 1″ from the top of the 3 1/2″ rectangle.

Step Eight. Adhere the flowers together. You will have a total of three – three layered flowers and two – two layered flowers. Make sure to adhere a centre in each flower.

Step Nine. Adhere a lacy leaf and plain green leaf in the top left side of the circle as desired. Adhere the two – two layered flowers in the top left side of the circle, making sure they look like they are apart of the leaves.

Step Ten. Adhere the remaining lacy leaf to the bottom right side of the circle as desired. Adhere a green leaf in the bottom left side of the circle and top right side of the circle. Adhere the remaining three – three layered flowers in the bottom right side of the circle, making sure they look like they are apart of the leaves.

Step Eleven. Cut a cardbase out of White Soft Finish Cardstock that measures 4″ x 10 1/2″, score at 5 1/4″. Adhere the cardfront to the cardbase.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Oh Happy Day! Card at home.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Forest Moss, Dried Marigold and Walnut Stain
  • Blending Tool with Foam
  • Ranger Ink: Jet Black Archival Ink
  • Graphic 45: Bird Watcher – 12×12 Patterns & Solids Paper Pad
  • Misc: Book Page and Rose Gold Foil Paper
Elizabeth Craft Designs General Planner Essentials Sidekick Essentials Soft Finish Cardstock

Love Tag

July 11, 2021

Hey Crafters! Katelyn here, sharing with you my Love Tag.

To create my Love Tag, I’ve used a variety of the dies as well as stamps from the Sidekick Essentials Collection and dies from the Planner Essentials Collection. You’ll want to read below as I share with you how to recreate my tag at home.

Step One. Choose a piece of patterned paper out of the Reminiscence the Book. From the Planner Essentials 30 – Wave Pocket die, you’ll need the medium tag. Die cut the tag out of the patterned paper. Ink the edges of the tag using Walnut Stain Distress Ink and a blending tool with foam.

Step Two. Choose another piece of patterned paper out of the Reminiscence the Book. Die cut the stitched label from the Planner Essentials – Planner Labels out of the patterned paper. Ink the edges of the label using Walnut Stain Distress Ink and a blending tool with foam.

Step Three. From the Planner Essentials 32 – View Master Die, you’ll need the plain and travel tag. Die cut the travel tag out of a piece of kraft cardstock. Choose a piece of patterned paper out of the Reminiscence the Book and die cut the plain tag out of it. Ink the edges of both tags using Walnut Stain Distress Ink and a blending tool with foam.

Step Four. Choose two pieces of patterned paper out of the Reminiscence the Book. From the Sidekick Essentials 5 die, you’ll need the tab and the & symbol. Die cut the tab out of one of the patterned papers and die cut the & symbol out of the other patterned paper. Ink the edges of both pieces using Walnut Stain Distress Ink and a blending tool with foam.

Step Five. Choose another piece of patterned paper out of the Reminiscence the Book. From the Planner Essentials 29 – Directions die, choose one of the arrows. Die cut the arrow out of the patterned paper. Ink the edges of the arrow using Walnut Stain Distress Ink and a blending tool with foam.

Step Six. Pick one more piece of patterned paper out of the Reminiscence the Book. From the Planner Essentials – Planner Filmstrip, you’ll need the plain polaroid frame. Die cut the frame out of the patterned paper. Ink the edges of the frame using Walnut Stain Distress Ink and a blending tool with foam.

Step Seven. Next, you’ll need the Sidekick Essentials – Paper Love Stamp Set. Apply Gathered Twigs Distress Ink to the floral square and stamp onto a piece of White Soft Finish Cardstock. Apply Gathered Twigs Distress Ink to the Love word and stamp onto a piece of White Soft Finish Cardstock. Fussy cut the square out. Cut the Love word into a strip. Ink the edges of both pieces using Walnut Stain Distress Ink and a blending tool with foam.

Step Eight. Next, you’ll need the Sidekick Essentials – In My Garden Stamp Set. Apply Broken China Distress Ink to the bee hexagon and stamp onto a piece of Kraft Cardstock. Fussy cut the hexagon out. Ink the edges of the hexagon using Walnut Stain Distress Ink and a blending tool with foam.

Step Nine. From the Reminiscence the Book, you’ll need the label patterned paper. Fussy cut one of the labels out. Ink the edges of the label using Walnut Stain Distress Ink and a blending tool with foam.

Step Ten. Staple the polaroid frame together. Adhere the floral square 3/4″ from the left 1/2″ from the top of the polaroid frame. Foam square the polaroid frame to the right hand side of the tag as desired.

Step Eleven. Adhere the tab to the bottom left side of the polaroid frame as desired. Foam square the fussy cut label 1 1/8″ from the left and 3/4″ from the top of the tag.

Step Twelve. Adhere the plain tag 3/4″ from the top of the tag and 1/8″ from the right of the polaroid frame. Adhere the travel tag 1 5/8″ from the left and 1 1/8″ from the top of the tag.

Step Thirteen. Use adhesive and foam squares to adhere the stitched label 3/8″ from the left and 1/8″ from the bottom of the tag. Adhere the & symbol to the right hand side of the stitched label as desired.

Step Fourteen. Use foam squares to adhere the bee hexagon 1/4″ from the right and 5/8″ from the bottom of the tag. Adhere the arrow to the left of the & symbol as desired. Use adhesive and foam squares to adhere the Love word strip 1 1/4″ from the left and 1/2″ from the bottom of the tag.

Step Fifteen. To finish the tag, tie a piece of twine through the top of the tag in a bow.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Love Tag at home.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Broken China, Gathered Twigs and Walnut Stain
  • Blending Tool with Foam
  • Misc: Kraft Cardstock, Twine and Mini Stapler
A Way With Words Elizabeth Craft Designs General Joset Designs Planner Essentials Soft Finish Cardstock

Merry Christmas Gift Tag

July 3, 2021

Hey Crafters! Katelyn here, sharing with you a little Christmas in July with my Merry Christmas Gift Tag.

To create my gift tag, I’ve used a variety of dies and stamps from Suzanne Cannon as well as dies from the Planner Essentials Collection. You’ll want to read below as I share with you how to recreate my gift tag at home.

Step One. Choose a piece of red lightly patterned paper from the Reminiscence the Book. Die cut the small tag from the Planner Essentials – 2 die out of the patterned paper. Ink the edges of the tag using Black Soot Distress Ink and a blending tool with foam.

Step Two. From the Flourished Christmas Minis 2 die, die cut the snowflake once out of White Soft Finish Cardstock and a second time out of silver foil paper.

Step Three. Die cut the stars once from the Peace on Earth Die out of Champagne foil paper. You’ll need a total of three stars.

Step Four. From the Christmas Collection Stamp Set, you’ll need the Merry Christmas words. Apply Jet Black Archival Ink to the words and stamp onto a piece of White Soft Finish Cardstock. Fussy cut the Merry word out and cut the Christmas word into a strip. Ink the edges of both pieces using Black Soot Distress Ink and a blending tool with foam.

Step Five. Adhere one star in the top right corner of the tag. Adhere the second star in the top left corner of the tag. Adhere the third star in the bottom left corner of the tag.

Step Six. Layer and adhere the two snowflakes together, making sure that the silver foil snowflake ends up at the top. Foam square the snowflakes to the middle of the tag. Add Trans. Glitter/Gold Dots to the silver snowflake as desired.

Step Seven. Adhere the Merry Christmas sentiment to the bottom right portion of the tag as desired. The merry and some of the Christmas will sit on the snowflakes.

Step Eight. To finish the tag, tie a piece of twine through the hole at the top of the tag.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Merry Christmas Gift Tag.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Ranger Ink: Black Soot Distress Ink and Blending Tool with foam
  • Misc: Silver Foil Paper, Champagne Foil Paper and Twine
Elizabeth Craft Designs General Joset Designs Planner Essentials Sidekick Essentials Soft Finish Cardstock

Happy Gardening Card

June 25, 2021

Hey Crafters! Katelyn here, sharing with you my Happy Gardening Card.

To create my Happy Gardening Card, I’ve used a variety of the dies from the Planner Essentials Collection and Joset Designs as well as dies and stamps from the Sidekick Essentials Collection. You’ll want to read below as I share with you how to recreate my card at home.

Step One. Choose two pieces of patterned paper out of the Reminiscence the Book. From the first patterned paper, die cut a 3 1/2″ Stitched Rounded Rectangle. From the second piece of patterned paper, die cut a 3″ Stitched Rounded Rectangle. Distress the edges of both rectangles. Ink the edges of both rectangles using Walnut Stain Distress Ink and a blending tool with foam.

Step Two. Die cut a 3 1/4″ Fitted Rounded Rectangle out of a piece of kraft cardstock. Distress the edges of the rectangle. Ink the edges of the rectangle using Walnut Stain Distress Ink and a blending tool with foam.

Step Three. Choose a piece of patterned paper out of the Reminiscence the Book. Die cut the plain label from the Sidekick Essentials 16 – Seed Packet Set. Ink the edges of both pieces using Walnut Stain Distress Ink and a blending tool with foam.

Step Four. Choose a piece of patterned paper out of the Reminiscence the Book. Die cut the tattered note page from the Sidekick Essentials 16 – Seed Packet Set. Trim the note page down to 1 1/8″. Ink the edges of the piece using Walnut Stain Distress Ink and a blending tool with foam.

Step Five. From the Planner Essentials 22 – Planner Pocket 3 – Top Loading die, die cut the arrow strip out of a piece of kraft cardstock. Ink the edges of the arrow using Walnut Stain Distress Ink and a blending tool with foam.

Step Six. You’ll need to choose a green piece of patterned paper out of the Reminiscence the Book. From the Sidekick Essentials – 7 die, you’ll need the large plant and two of the single leaves. Die cut the large plant once out of the patterned paper. Die cut the two single leaves twice out of the same green patterned paper.

Step Seven. You’ll need the Happy Gardening Label from the Sidekick Essentials – Home & Nature Stamp Set. Apply Vintage Photo Distress Ink to the label and stamp onto a piece of White Soft Finish Cardstock. Fussy cut around the label. Ink the edges of the label using Walnut Stain Distress Ink and a blending tool with foam.

Step Eight. Adhere the 3 1/4″ rectangle to the 3 1/2″ rectangle. Foam square the 3″ rectangle to the 3 1/4″ rectangle.

Step Nine. Adhere the torn edge note piece 1/4″ from the right as the 3″ rectangle.

Step Ten. Staple the label pieces together as desired. Staple the arrow strip 1/4″ from the right of the label. Adhere the label 1/2″ from the right and 5/8″ from the bottom of the 3″ rectangle.

Step Eleven. Adhere the large plant as desired on the right hand side of the 3″ rectangle. Adhere the single leaves as desired around the large plant.

Step Twelve. Foam square the Happy Gardening label 1/8″ from the left and 1/4″ from the bottom of the 3″ rectangle.

Step Thirteen. To finish the card, cut a cardbase out of White Soft Finish Cardstock that measures 4 3/4″ x 7″, score at 3 1/2″.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Happy Gardening Card at home.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Vintage Photo and Walnut Stain
  • Blending Tool with Foam
  • Misc: Kraft Cardstock
Elizabeth Craft Designs General Planner Essentials Sidekick Essentials Soft Finish Cardstock

Carpe Diem Planner Page

June 19, 2021

Hey Crafters! Katelyn here, sharing with you my Carpe Diem Planner Page.

To create my Carpe Diem Planner Page, I’ve used a variety of the dies as well as stamps from the Planner Essentials Collection and dies from the Sidekick Essentials Collection. You’ll want to read below as I share with you how to recreate my planner page at home.

Step One. You’ll need the page die from the Sidekick Essentials 17 – Window Folder Set. Die cut the page out of a piece of White Soft Finish Cardstock. Spritz the bottom right corner of the page with water. Spritz Dylusions Ink Spray in Blue Lagoon, Island Parrot and Fiery Sunset as desired. Dab off the excess ink spray and allow to dry.

Step Two. From the Planner Essentials – Pure Spring Stamp Set, you’ll need the chicken wire stamp. Apply Detail Black Ink to the stamp and stamp randomly on the page. Reapply ink to the stamp as needed and stamp four more times.

Step Three. Ink the edges of the page using Black Soot Distress Ink and blending tool with foam.

Step Four. From the Planner Essentials – Pieces of Life 3 – Quotes Stamp Set, you’ll need the Carpe Diem words. Apply Detail Black Ink to the words and stamp onto a piece of White Soft Finish Cardstock. Cut the two words into strips. Ink the edges of the word strips using Black Soot Distress Ink and a blending tool with foam.

Step Five. Choose one of the reinforcements out of the Planner Essentials Reinforcement Variety Pack 2. Die cut the reinforcement out of a piece of White Soft Finish Cardstock. Ink the edges of the reinforcements using Black Soot Distress Ink and a blending tool with foam.

Step Six. Choose two pieces of patterned paper out of the Reminiscence the Book. From the Planner Labels die, you need the arrow label and stitched label. Die cut the arrow label out of one of the patterned papers. Die cut the stitched label out of the other piece of patterned paper. Ink the edges of both labels using Black Soot Distress Ink and a blending tool with foam.

Step Seven. Choose another piece of patterned paper from the Reminiscence the Book. You’ll need the 03 tag and the & symbol from the Sidekick Essentials 5 die. Die cut the 03 tag out of a piece of kraft cardstock. Die cut the & symbol out of the patterned paper piece. Ink the edges of the tag using Black Soot Distress Ink and a blending tool with foam.

Step Eight. Choose one of the arrows from the Planner Essentials 29 – Directions die. Die cut the arrow out of a piece of patterned paper from the Reminiscence the Book. Ink the edges of the arrows using Black Soot Distress Ink and a blending tool with foam.

Step Nine. Next you’ll need the notched label from the Planner Essentials 26 – Planner Pocket 4 – Tags & Toppers. Die cut the label out of a piece of patterned paper from the Reminiscence the Book. Ink the edges of the label using Black Soot Distress Ink and a blending tool with foam.

Step Ten. From the Sidekick Essentials 14 – Bonjour Fold Out, you’ll need the large tattered rectangle. Die cut the rectangle out of a piece of patterned paper from the Reminiscence the Book. You’ll need both pieces. Ink the edges of both pieces using Black Soot Distress Ink and a blending tool with foam.

Step Eleven. Next, you’ll need the tag from the Sidekick Essentials 18 – Wave Pocket die. Die cut the tag out of a piece of patterned paper from the Reminiscence the Book. Ink the edges of the tag using Black Soot Distress Ink and a blending tool with foam.

Step Twelve. Adhere the reinforcements overtop of the holes on the page.

Step Thirteen. Staple the inside of the tattered rectangle 1/4″ from the right and 1 3/8″ from the bottom of the page. Adhere the arrow label 3/4″ from the left and 2 1/8″ from the top of the page. Use foam squares to adhere the tag 3/8″ from the right and 2 5/8″ from the top of the page.

Step Fourteen. Adhere the stitched label 5/8″ from the right and 3 1/4″ from the top of the page. Adhere the tattered rectangle 1 1/4″ from the right and 3″ from the top. Use adhesive and foam square to adhere the notched label 1/4″ from the right and 1 1/2″ from the bottom of the page.

Step Fifteen. Adhere the & symbol to the right hand side of the notched label as desired. Adhere the arrow to the left of the & symbol as desired.

Step Sixteen. Adhere the 03 tag slightly overtop of the & symbol as desired. Adhere the Carpe Diem words as desired on the tag.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Carpe Diem Planner Page at home.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Black Soot
  • Blending Tool with Foam
  • Dylusions Ink Spray: Blue Lagoon, Island Parrot and Fiery Sunset
  • Pink Fresh: Detail Black Ink
  • Misc: Kraft Cardstock
A Way With Words Elizabeth Craft Designs General Joset Designs Soft Finish Cardstock

Special Moments Wall Hanging

June 5, 2021

Hey Crafters! Katelyn here, sharing with you my Special Moments Wall Hanging.

To create my wall hanging, I’ve used a variety of dies from Suzanne Cannon and Joset Designs. You’ll want to read below as I share with you how to recreate my wall hanging at home.

Step One. Get a heavy piece of cardstock, cardboard or a print you no longer want to use and die cut a 4 1/2″ Stitched Rounded Rectangle out of it. Ink the edges of the rectangle using Walnut Stain Distress Ink and a blending tool with foam.

Step Two. Choose five pieces of coordinating patterned paper out of the Reminiscence the Book. From the first patterned paper, die cut a 4 1/2″ Stitched Rounded Rectangle. Ink the edges of the rectangle using Walnut Stain Distress Ink and a blending tool with foam.

Step Three. You’ll need another two of the patterned papers. Die cut a 4″ Stitched Rounded Rectangle out of the second piece of patterned paper. Die cut a 3 1/2″ Stitched Rounded Rectangle out of the third piece of patterned paper. Ink the edges of both rectangles using Walnut Stain Distress Ink and a blending tool with foam.

Step Four. Now you’ll need the remaining two pieces of patterned paper. Die cut a 4 1/4″ Fitted Rounded Rectangle out of the fourth piece of patterned paper. Die cut a 3 3/4″ Fitted Rounded Rectangle out of the last patterned paper. Ink the edges of both rectangles using Walnut Stain Distress Ink and a blending tool with foam.

Step Five. Die cut the Flourished Frame out of a piece of White Soft Finish Cardstock.

Step Six. Choose a sixth piece of patterned paper out of the Reminiscence the Book. Die cut the large butterfly flourished from the Butterfly Flourish die out of the patterned paper. Die cut the small butterfly twice from the Butterfly Flourish die out of White Soft Finish Cardstock.

Step Seven. Die cut the Special and Moments words from the Special Moments Die out of kraft cardstock. Die cut the words a second time this time out of black cardstock.

Step Eight. Adhere the 4 1/2″ rectangle to the 4 1/2″ heavy cardstock piece. Adhere the 4 1/4″ rectangle to the 4 1/2″ rectangle. Adhere the 4″ rectangle to the 4 1/4″ rectangle.

Step Nine. Adhere the flourish frame to the 4″ rectangle.

Step Ten. Adhere the 3 1/2″ rectangle to the 3 3/4″ rectangle. Foam square the 3 3/4″ rectangle to the 4″ rectangle.

Step Eleven. Foam square the large butterfly flourish to the middle of the 3 1/2″ rectangle. Adhere the two butterflies around the large butterfly flourish as desired.

Step Twelve. Adhere the kraft cardstock special word to the black cardstock special word, making sure that you get a bit of shadowing. Adhere the kraft cardstock moments word to the black cardstock moments word, making sure that you get a bit of shadowing. Adhere the words overtop of the large butterfly flourish as desired.

Step Thirteen. To finish the wall hanging, punch two holes at the top. Tie a piece of white twine through both holes to create the wall hanging.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Special Moments Wall Hanging.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Ranger Ink: Walnut Stain Distress Ink and Blending Tool with foam
  • Misc: Black Cardstock, Kraft Cardstock, White Twine and Heavy Cardstock (wall hanging backer)
Elizabeth Craft Designs General Joset Designs Paper Flowers Soft Finish Cardstock

For A Special Someone Gift Box

May 24, 2021

Hey Crafters! Katelyn here, sharing with you my For A Special Someone Gift Box.

To create my gift box, I’ve used dies from the Paper Flower Collection as well as stamps and dies from Joset Designs. You’ll want to read below as I share with you how to recreate my gift box at home.

Step One. Choose a piece of tropical themed patterned paper. Die cut the Pizza Box die from the Pizza Box Die set out of the patterned paper. Ink the edges of the box using Walnut Stain Distress Ink and a blending tool with foam.

Step Two. From the Pizza Box die, die cut the scallop square out of a piece of White Soft Finish Cardstock. Ink the edges of the square using Walnut Stain Distress Ink and a blending tool with foam.

Step Three. Choose a second piece of coordinating patterned paper. Die cut the stitched square from the Pizza Box Die out of the patterned paper. Ink the edges of the square using Walnut Stain Distress Ink and a blending tool with foam.

Step Four. Choose a third and fourth piece of coordinating patterned paper. Make sure one of them is green. Die cut the stitched circle from the Pizza Box Die out of the green patterned paper. Die cut the smallest circle from the Pizza Box Die out the fourth patterned paper. Ink the edges of both circles using Walnut Stain Distress Ink and a blending tool with foam.

Step Five. Die cut the Elegant Ornament out of a piece of kraft cardstock.

Step Six. Die cut a 3/4″ Diagonal Stitched Fishtail out of a piece of White Soft Finish Cardstock. Cut the fishtail down to 3 1/4″. From the Build Your Own Sentiments 1 Stamp Set, you’ll need the For a Special and Someone words. Apply Detail Black Ink to both stamps and stamp onto the right hand side of the fishtail. Ink the edges of the fishtail using Walnut Stain Distress Ink and a blending tool with foam.

Step Seven. Choose one of the leaves from the Leaves & Branches die. Die cut the leaf three times out of the green patterned paper.

Step Eight. From the Florals 4 die, die cut the centres once out of White Soft Finish Cardstock. Die cut one of the buds from the same die twice out of White Soft Finish Cardstock.

Step Nine. From the Florals 4 die, die cut the large flower out once, the medium flower out three times and the small flower out three times out of White Soft Finish Cardstock. Using a blending tool with foam, blend Broken China Distress Ink over the entire surface of the flowers.

Step Ten. Assemble the pizza box.

Step Eleven. Foam square the scalloped square to the top of the box. Adhere the stitched square to the scallop square. Trim the elegant ornament down as desired. Adhere the elegant ornament to the stitched circle. Adhere the stitched circle 3/4″ from the right and 1/2″ from the bottom of the stitched square.

Step Twelve. Adhere the small circle to the middle of the elegant ornament. Adhere the fishtail 1″ from the left and 1″ from the bottom of the stitched square.

Step Thirteen. Shape the flowers. Adhere the flowers together. Make sure each flower has a centre adhered to the middle of the flowers.

Step Fourteen. Shape the leaves. In the top left side of the ornament, adhere a leaf and bud. Adhere a leaf in the middle left side of the ornament. Adhere the remaining leaf and bud to the bottom left side of the ornament.

Step Fifteen. Foam square the largest flower so that it sits slightly on the fishtail. Adhere the remaining two flowers as desired around the large flower.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my For A Special Someone Gift Box at home.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Broken China and Walnut Stain
  • Blending Tool with Foam
  • Pink Fresh: Detail Black Ink
  • Graphic 45: Lost In Paradise Paper Pack
  • Misc: Kraft Cardstock
%d bloggers like this: