Browsing Tag

CAS

A Way With Words Joset Designs

Celebrate The Season

December 2, 2019

The 2019 Holiday Season is in full swing. That means lots of cards and gifts and, if you’re like me, you sometimes need a gift or card in a hurry –– this is just for you.

It’s Sandy and I have two quick and easy projects to share with you today. I like to get the most value possible from my crafting supplies, so today I will be showing you how I made a stencil using the Snowflake die set and how I used it to make a card and a gift tag.

I began by cutting the Snowflake die, using only the center portion of the die – you don’t need the outside edge, from a sheet of transparent film, the kind used for presentations (shown below). This works well because I’m using a wafer thin die but a thin packaging material could work also.

I cut the 8.5″ X 11″ sheet in half to fit in my die cutting machine and then cut the snowflake directly in the center. I made two stencils using the large and medium snowflake.

This is a 5.5″ square card so the appropriate size Stitched Indented Square was used along with the Stitched Rounded Square that is one size larger. You could easily make this card any size you prefer using these die sets.

After securing the stencil to the paper with some low tack tape, I began adding the color using a circulare motion in the center. The Picket Fence brushes were used here but a color blender could be used as well.

The second color was added using the same method. The colors I used are Distress Oxide Inks, Broken China and Wilted Violet.

I covered the entire panel using the same method.

The panels were layered together and ribbon was added with a cute little bow.

The word “Celebrate” was stamped and embossed using white embossing powder and then cut out using the banner die.

The banner was added to the ribbon and then all panels were added to the white card base. The corners of the card were rounded to match the rounded squares on the card.

For this clean and simple tag – I used the same stenciling technique and then added some sequines for a little bling. “Cheers” was added to give a festive feeling to the tag. Now I’m ready to party, how about you?

Thanks for joining me and HAPPY HOLIDAYS,

S@ndy

Cardmaking Elizabeth Craft Designs General Joset Designs ModaScrap Planner Essentials Soft Finish Cardstock Stamping Videos

Clean And Simple Die Cut Cards With DIY Foam Stamps

October 7, 2019

Hello everyone, it’s Sanna Lippert here today with another guest design team project share. This post started off with a simple question: have you ever used the die to cut out the stamped image you just made?

I found the question very interesting, so I gave it a try and these cards are a result of that experiment.

Here is what I did:
1. Take your die cut die DIY foam stamps and apply three colours of Distress Ink and for the second set use Distress Oxide inks onto the foam stamp.
2. Spray water mist onto the inked stamp to create a “faux watercolour look”.
3. Now die cut the stamped images using the same die cut dies you used originally to create the DIY stamps. This is a little bit tricky, as you need to figure out where to place the die cut die THRU the paper. Preferably, place the image againts a window/light box, for easier placement.
4. You can either adhere the images onto the card base with a glue pen OR attach Clear Double Sided Adhesive Sheets onto the stamped paper BEFORE die cutting. This makes adhering much easier.
5. Adhere onto card bases and then stamp sentiments on black cardstock with embossing ink and using white embossing powder heat set with a heat gun.
6. Attach to the card base with 3D foam pad, add faux stitching around the edges of the card with a gel pen. If you want to, apply black ink splatters for decoration.

Here is a start-to-finish video for you to watch showing the complete process:

There are, of course, easier ways to create these images:
a) die cut the image from white cardstock and then ink the die cut image with stamp inks; OR
b) ink a piece of white cardstock and then die cut it.

This technique I share today, shows another way of incorporating your with die cut dies created DIY stamps into cardmaking. You need a little bit of patience, but in the end you get a really nice artsy looking images!

Wishing you happy crafting,
xxx, Sanna

Supplies:
Elizabeth Craft Desings:

Other:
Distress Inks and Distress Oxided by Ranger Ind. Inc.
Signo uni-ball white pen
Glue pen – wide
Black spray ink
Kraft cardstock
Black cardstock
White embossing powder
3D foam pads
Sizzix Big Shot A4
VersaMark stamp ink
Anti static pad

Cardmaking ModaScrap Soft Finish Cardstock Stamping

Bold And Bright Save The Date Card

September 23, 2019

Hi friends! It’s EK, and today I am popping in to share a bold and bright ‘save the date’ invitation design.

So often I see an invitation or save the date cards and they are often created with pale or pastel tones and so serious. I thought it might be really fun to create a bold, bright, and fun ‘save the date’ card. And since I am using the ModaScrap Wedding Sentiments stamp set, creating this card will be so simple.

Step One: Trim a piece of 110lb Soft Finish Cardstock to 4.25×8.5 and score and fold to create a A2 card.

Step Two: Using the smallest circles from the Dashing Circles die set, die cut a series of circles out of bright colored Soft Finish Cardstock. I used Ladybug Red, Bright Orange, Sky Blue, Spring Green, and Perfect Purple Soft Finish Cardstock.

Step Three: Create a frame for the card using two dies from the Dashing Rectangles die set. I used some Rich Black Soft Finish Cardstock for my frame.

Step Four: Using the Wedding Sentiments stamp set, stamp images and a sentiment onto your die cut circles using some black ink.

Step Five: Adhere the black die cut frame to the card using some 3mm Double Sided Adhesive.

Step Six: Adhere the die cut circles onto the card frame, letting some of the circles dangle off the edge. Trim the bits hanging off the card so the circles become flush with the edge of the card.

Step Seven: Add some decorative drops to the card frame using a liquid drops. Did you see that ECD just add a brand new line of Craft Drops to their store? There are six new colors and I am so excited to play with these new craft drops!

I hope you got a kick seeing how I created this bold and bright save the date card. What I like about this design is I can change the stamp set and create a whole new card. Need a birthday card, this design will work. Need an anniversary card, this design could also work. And of course this fun, bright, bold design will be perfect for an anytime card!

Let us know in the comments below what your favorite color pallet is. Do you like bold and bright, pale or pastel, dark, jewel toned? Let us know because we are curious to hear!

EK Gorman


https://linkdeli.com/widget.js?1559654439292

Krista Schneider

Coloring Design Team Designer Challenge – June

June 20, 2017

Hi everyone,

It’s the Coloring Design Team’s turn to share their cards for this month’s Coloring Design Team Designer Challenge.

Our Challenge this month is ….. Clean & Simple Card Set – create a set of three Clean &  Simple cards. Select a stamp set and use a different image from this set on each of the cards. Each card includes one colored image and a sentiment.

For our Challenge today we are giving away a Krista Schneider Jungle Cuties Clear Stamp set with coordinating dies; a pack of Dusky Lavender Soft Finish Cardstock and a pack of White 100lb 8.5″ x 11″ Soft Finish Cardstock to 3 winners. 

To enter, simply leave a comment on this blog post below and answer this question: Describe your crafting style.

We will select 3 lucky winners in a random drawing.

The winners will be announced on Friday, June 23, here on the Elizabeth Craft Designs blog.

Now let’s take a look at the wonderful creations our talented Design Team have created for the Challenge this month. For more information about the cards, click on the designer’s name under each card to be taken to the designer’s blog post and will open up in a new window.

Continue Reading

%d bloggers like this: