Browsing Tag

Diagonal Stitched Fishtails

Elizabeth Craft Designs General Joset Designs Planner Essentials Soft Finish Cardstock

Inspire Tag

March 24, 2020

Hey Crafters! Katelyn here, sharing with you my Inspire Tag.

To create my Inspire Tag, I’ve used a variety of the new dies from Charlene and Ilse’s Art Journal Specials Collection as well as a couple of dies from the Planner Essentials Collection and Joset Designs. You’ll want to read below as I share with you how to recreate my tag at home.

Step One. Die cut the large tag from the Planner Essentials 26 – Planner Pocket 3 – Tag & Toppers die out of Kraft Cardstock. Place the S033 stencil on the right hand side of the tag and put Texture Paste Opaque Matte through the stencil with a palette knife. Once the texture paste has dried, distress the edges of the tag. Ink the edges of the tag using Black Soot Distress Ink and a blending tool with foam.

Step Two. Die cut the 2″ note piece from the Planner Essentials 21 – Note Pieces die out of book page. Distress the edges of the note piece. Ink the edges of the note piece using Black Soot Distress Ink and a blending tool with foam.

Step Three. Die cut a 1″ Diagonal Stitched Fishtail out of White Soft Finish Cardstock and out of book page. Tear the top of the white fishtail so that it ends up being 4″ long. Tear the top of the book page fishtail so that it ends up being 3 3/4″ long. Distress the edges of the fishtails. Ink the edges of the fishtails using Black Soot Distress Ink and a blending tool with foam.

Step Four. Choose one of the reinforcements from the Reinforcement Variety Pack Die. Die cut the reinforcement out of black cardstock.

Step Five. Die cut 1760 die out of black cardstock. Cut the die cut piece in half.

Step Six. Die cut 1759 die out of black cardstock. Cut the circles to fit the tag as desired.

Step Seven. Apply Jet Black Archival Ink to the cotton image from the First Sights of Spring Stamp Set and stamp onto a piece of watercolour cardstock. Colour the cotton image in using Dina Wakley Scribble Sticks from Set 1 & 2 and a waterbrush. Once the image has dried, fussy cut it out. Ink the edges of the cotton using Black Soot Distress Ink and a blending tool with foam.

Step Eight. Use the letters from the Morning Letters Stamp Set and Jet Black Archival Ink to stamp “inspire” on a piece of White Soft Finish Cardstock. Fussy cut the word out. Ink the edges of the word using Black Soot Distress Ink and a blending tool with foam.

Step Nine. Cut a piece of burlap that measures 2″ x 3 1/4″. Cut a piece of cheesecloth as desired.

Step Ten. Adhere the reinforcement circle to the top of the tag on the circle. Adhere the white fishtail 1/4″ from the right and 1/2″ from the bottom of the tag. Adhere the book page fishtail 1 1/8″ from the left and 3/4″ from the bottom of the tag.

Step Eleven. Adhere the burlap piece 1 1/4″ from the bottom and to the right hand side of the tag. Adhere the mandella half to the 1″ from the top and to the right hand side of the tag.

Step Twelve. Foam square the note piece 1/2″ from the left and 1 1/4″ from the bottom of the tag. Adhere the cheesecloth as desired to the middle right side of the note piece. Adhere the circle piece overtop of the cheesecloth as desired.

Step Thirteen. Use foam squares to adhere the cotton image 5/8″ from the bottom and 3/8″ from the right of the tag. Adhere the inspire word to the bottom right side of the cotton image.

Step Fourteen. Tie a piece of twine through the hole at the top of the tag. Use a paint brush to splatter Tarnished Brass Distress Spray Stain on the tag as desired.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Inspire Tag.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Black Soot
  • Distress Spray Stain: Tarnished Brass
  • Blending Tool with Foam
  • Dina Wakley: Scribble Sticks 1&2
  • Ranger Ink: Jet Black Archival Ink and Texture Paste Opaque Matte
  • Misc: Black Cardstock, Kraft Cardstock, Book Page, Burlap, Cheesecloth and Twine
Cardmaking Elizabeth Craft Designs General Joset Designs Soft Finish Cardstock

Sea You Soon Card

March 8, 2020

Hey Crafters! Katelyn here, sharing with you my Sea You Soon Card.

I’m been loving creating with the new dies from Joset Designs newest release. For today’s project, I’ve create this card, which uses a variety of the new Joset Designs dies as well as some from the previous release. You’ll want to read below as I share with you how to recreate my card at home.

Step One. Choose a piece of beach themed patterned paper. Die cut a 5 1/4″ Stitched Rounded Square out of the paper. Ink the edges of the square using Black Soot Distress Ink and a blending tool with foam.

Step Two. Die cut a 4 3/4″ Stitched Rounded Square out of White Soft Finish Cardstock. Ink the edges of the square using Black Soot Distress Ink and a blending tool with foam.

Step Three. Die cut a 3/4″ Diagonal Stitched Fishtail out of White Soft Finish Cardstock. Cut the fishtail down to 2 1/4″. Apply Mermaid Lagoon Distress Ink to the Sea You Soon sentiment from the Splish Splash Sentiment and stamp onto the fishtail. Ink the edges of the banner using Black Soot Distress Ink and a blending tool with foam.

The next seven steps all use the Lighthouse die.

Step Four. Die cut the Lighthouse twice out of White Soft Finish Cardstock. Set one full lighthouse to the side.

Step Five. Die cut the bottom and middle die out of White Soft Finish Cardstock. From the second lighthouse, cut the top portion off, just below the windows.

Step Six. Die cut the top and bottom portion of the lighthouse out of White Soft Finish Cardstock. From the second lighthouse, cut the strip between the window and middle out as well as the strip in between the middle and the bottom. Recycle the middle and bottom portions of the lighthouse. Using a blending tool with foam, blend Candied Apple Distress Ink over the entire surface of the top, bottom and two strips.

Step Seven. Die cut the large windows from the lighthouse die out of White Soft Finish Cardstock. Using a blending tool with foam, blend Squeezed Lemonade Distress Ink over the entire surface of the windows.

Step Nine. Die cut the small windows, door opening and decorative strip out of White Soft Finish Cardstock. Using a blending tool with foam, blend Mermaid Lagoon Distress Ink over the entire surface of the small windows, door opening and decorative strip.

Step Ten. Die cut the sand out of White Soft Finish Cardstock. Using a blending tool with foam, lightly blend Tea Dye Distress Ink over the entire surface of the sand.

Step Eleven. Die cut the seagulls out of White Soft Finish Cardstock. Using a blending tool with foam, blend Hickory Smoke Distress Ink over the entire surface of the seagulls.

Step Twelve. From the Seashell Dies, choose three. Die cut the three shells out of White Soft Finish Cardstock. Using a blending tool with foam, lightly blend Tea Dye Distress Ink over the entire surface of one of the shells. Using a blending tool with foam, lightly blend Rusty Hinge Distress Ink over the entire surface of the second shell. Using a blending tool with foam, lightly blend Spun Sugar Distress Ink over the entire surface of the third shell.

Step Thirteen. From the Diving Accessories die, you’ll need the starfish. Die cut the starfish out of White Soft Finish Cardstock. Using a blending tool with foam, blend Dried Marigold Distress Ink over the entire surface of the starfish.

Step Fourteen. Adhere your lighthouse together using the full lighthouse from step four.

Step Fifteen. Adhere the 4 3/4″ square to the 5 1/4″ square.

Step Sixteen. Foam square the sand to bottom left side of the 4 3/4″ square. Use adhesive and foam squares to adhere the lighthouse slightly overtop of the sand.

Step Seventeen. Use adhesive and foam squares to adhere the starfish and three seashells as desired to the right of the lighthouse.

Step Eighteen. Foam square the sentiment fishtail 2″ from the top and all the way to the right hand side of the 4 3/4″ square. Adhere the two seagulls as desired around the top of the lighthouse.

Step Nineteen. Cut a card base out of White Soft Finish Cardstock that measures 5 1/4″ x 10 1/2″, score at 5 1/4″. Adhere the card front to the card base.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Sea You Soon Card.

Supplies –

Elizabeth Craft Designs:

Other:

  • Distress Ink: Black Soot, Rusty Hinge, Tea Dye, Squeezed Lemonade, Hickory Smoke, Candied Apple, Mermaid Lagoon, Dried Marigold and Spun Sugar
  • Blending Tool with Foam
  • Graphic 45: Sunkissed Collection – Turtle Time
Charlene Stamps Elizabeth Craft Designs General Els van de Burgt Studio Home Decor Inspiration from the Design Team Joset Designs Soft Finish Cardstock Stamping

Loved Wall Hanging

February 13, 2020

Hey Crafters! Katelyn here, sharing with you my Loved Wall Hanging.

There’s only 1 day left until Valentine’s Day and I thought it would be fun to create a last minute wall hanging perfect to add to any place in your home. To create my project, I’ve used a variety of Charlene’s stamps and a some dies from Els van de Burgt Studio. You’ll want to read below as I share with you how to recreate my wall hanging at home.

Step One. Die cut a 3/4″ Diagonal Stitched Fishtail out of White Soft Finish Cardstock. Cut the fishtail down to 2 1/2″. Apply Worn Lipstick Distress Ink to the Loved word from the Journaling Elements stamp set and stamp onto the fishtail. Distress the edges of the fishtail. Ink the edges of the fishtail using Black Soot Distress Ink and a blending tool with foam.

Step Two. Die cut a 5 1/4″ Stitched Heart out of a book page. Distress the edges of the heart. Ink the edges of the heart using Black Soot Distress Ink and a blending tool with foam.

Step Three. Die cut a 4 1/4″ Stitched Heart out of a piece of White Soft Finish Cardstock. Using a blending tool with foam, blend Worn Lipstick Distress Ink over the entire surface of the heart. Apply Picked Raspberry Distress Ink to the X’s stamp from the Journaling Elements and stamp randomly over the entire surface of the heart. Reapply ink to the stamp as needed. Distress the edges of the heart. Ink the edges of the heart using Black Soot Distress Ink and a blending tool with foam.

Step Four. Die cut the medium Entwined Heart out of White Soft Finish Cardstock. Using a blending tool with foam, blend Candied Apple Distress Ink over the entire surface of the heart. Ink the edges of the heart using Black Soot Distress Ink and a blending tool with foam.

Step Five. Apply Jet Black Archival Ink to the Heart stamp from the Journaling Elements stamp set and stamp onto a piece of watercolour cardstock. Reapply ink to the Heart stamp and stamp onto the same piece of watercolour cardstock. Using a waterbrush and Ruby Red Scribble Stick, colour in three of the hearts. Using a waterbrush and Blushing Scribble Stick, colour in the other three of the hearts. Once the hearts are dry, fussy cut them out. Ink the edges of the hearts using Black Soot Distress Ink and a blending tool with foam.

Step Six. Choose one of the flower stamps from the A Field of Flowers stamp set. Apply Jet Black Archival Ink to the flower stamp and stamp onto a piece of watercolour cardstock. Reapply ink to the flower stamp and stamp onto the same piece of watercolour cardstock. Using a waterbrush and Sedonna Scribble Stick, colour in one of the flowers. Using a waterbrush and Blushing Scribble Stick, colour in the other flower. Once the flowers are dry, fussy cut them out. Ink the edges of the flowers using Black Soot Distress Ink and a blending tool with foam.

Step Seven. Choose one of the flower stamps from the Garden Flowers stamp set. Apply Jet Black Archival Ink to the flower stamp and stamp onto a piece of watercolour cardstock. Reapply ink to the flower stamp and stamp onto the same piece of watercolour cardstock. Using a waterbrush and Ruby Red Scribble Stick, colour in one of the flowers. Using a waterbrush and Magenta Scribble Stick, colour in the other flower. Once the flowers are dry, fussy cut them out. Ink the edges of the flowers using Black Soot Distress Ink and a blending tool with foam.

Step Eight. Foam square the pink stitched heart to the middle of the 5 1/4″ stitched heart. Adhere the entwined heart to the middle of the pink stitched heart. Adhere the loved fishtail 2″ from the bottom and 1/8″ from the right of the 5 1/4″ stitched heart.

Step Nine. Adhere the six hearts as desired on the left side of the heart as well as to the bottom middle of the loved fishtail.

Step Ten. Use adhesive and foam squares to adhere the flowers to the left hand side of the stitched hearts, making sure that you can see coloured small hearts.

Step Eleven. Punch two holes at the top of the stitched hearts. Tie a piece of twine through the two holes.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Loved Wall Hanging.

Katelyn

Other Supplies Used:

  • Distress Ink: Black Soot, Candied Apple, Worn Lipstick and Picked Raspberry
  • Blending Tool with Foam
  • Ranger Ink: Jet Black Archival Ink
  • Dina Wakley: Scribble Sticks 1 & 2
  • Misc: Twine, Waterbrush, Book page and Watercolour Cardstock
Cardmaking Elizabeth Craft Designs General Els van de Burgt Studio Joset Designs Planner Essentials Soft Finish Cardstock

How To Create A Christmas Card Using Planner Essentials Dies

November 14, 2019

Hey Crafters! Katelyn here, sharing with you my Merry Christmas Card.

I love the fact that the Planner Essentials dies can be used for more than just my planner spreads. So, to create my card, I’ve used a variety of dies from the Planner Essentials collection, Joset Designs and Els van de Burgt Studio. I hope you enjoy my tutorial!

Step One. You’ll need to choose two patterned papers from the Christmas Market Collection. Die cut the 4 1/2″ Stitched Rectangle out of one of the patterned papers. Die cut the 4″ Stitched Rectangle out of the other patterned paper. Distress the edges of the rectangles. Ink the edges of the rectangles using Walnut Stain Distress Ink and a blending tool with foam.

Step Two. Use the reverse side of the patterned paper used on the 4 1/2″ stitched rectangle and die cut the 1″ Diagonal Stitched Fishtails out of. Choose another piece of patterned paper from the Christmas Market collection and die cut the 1 1/2″ Diagonal Stitched Fishtails out the paper. Cut the 1″ fishtail down to 4 1/4″. Cut the 1 1/2″ fishtail down to 4 3/4″. Distress the edges of each fishtail. Ink the edges of each fishtail using Walnut Stain Distress Ink and a blending tool with foam.

Step Three. Die cut two base trees and each patterned tree from the Planner Essentials – 12 die out of White Soft Finish Cardstock. The chevron tree will stay white. Using a blending tool with foam, blend Fired Brick Distress Ink over the entire surface of the dotted tree. Using a blending tool with foam, blend Forest Moss Distress Ink over the entire surface of both base trees. Ink the edges of the base trees and dotted tree using Walnut Stain Distress Ink and a blending tool with foam.

Step Four. From the same Planner Essentials – 12 die, die cut a small star and medium star out of White Soft Finish Cardstock. Using a blending tool with foam, blend Squeezed Lemonade Distress Ink and a blending tool with foam over the entire surface of each star. Ink the edges of each star using Walnut Stain Distress Ink and a blending tool with foam.

Step Five. From the Planner Essentials – 14 die, die cut the Merry Christmas sentiment out of White Soft Finish Cardstock.

Step Six. Adhere the 4″ stitched rectangle to the 4 1/2″ stitched rectangle. Foam square the 1 1/2″ fishtail 1″ from the right and all the way to the top of the 4″ stitched rectangle. Use adhesive and foam squares to adhere the 1″ fishtail 7/8″ from the left and all the way to the top of the 4″ stitched rectangle. The fishtails will over lap.

Step Seven. Adhere the trees together. On the dotted tree, adhere the small star at the top. On the chevron tree, adhere the medium star at the top. Foam square the chevron tree 1/4″ from the right and 5/8″ from the bottom of the 4″ stitched rectangle. Use adhesive and foam squares to adhere the dotted tree 1/2″ from the left and 3/8″ from the bottom of the 4″ stitched rectangle.

Step Eight. Adhere the Merry to the middle of the dotted tree. Adhere the Christmas to the bottom section of the dotted tree. The Christmas word will hang slightly off the left side of the tree and will adhere to the chevron tree.

Step Nine. Cut a cardbase out of White Soft Finish Cardstock that measures 5 3/4″ x 9″, score at 4 1/2″. Adhere the cardfront to the cardbase.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Merry Christmas Card.

Katelyn

Elizabeth Craft Designs Supplies:

Other:

  • Distress Ink: Walnut Stain, Fired Brick, Squeezed Lemonade and Forest Moss
  • Blending Tool with Foam
  • Carta Bella: Christmas Market – Buffalo Plaid, Holiday Floral and Deck the Halls
Cardmaking Charlene Stamps Joset Designs Soft Finish Cardstock Stamping

Christmas Garden Card

October 9, 2019

Hi Everyone, it’s Tina here. I have a super fun card to share with you using Christmas Garden stamp set to create and background and accents. Below you will find the steps to create your own card.

Step 1 – Trim White Soft Finish Cardstock to 8 1/2″ x 5 1/2″, score at 4 1/4 and fold in half for a vertical side fold card. (A2)

Step 2 – Trim Brick Red Soft Finish Cardstock to 5 1/2″ x 4 1/4″. Adhere to card using 3mm Clear Double Sided Adhesive.

Step 3 – Trim White Soft Finish Cardstock to 5 1/2″ x 4 1/4″. Stamp Christmas Garden image using ink of your choice randomly covering the entire panel. See photo below.

Step 4 – Diecut Stitched Indented Rectangles using the background created from Step 3. Adhere to card using Foam Tape.

Step 5 – Stamp Christmas Garden image onto White Soft Finish Cardstock using Gina K Amalgam Ink two times. This is an alcohol friendly ink. Color in the images using any alcohol markers of your choice. I used Spectrum Noir alcohol markers. Fussy cut the images and adhere to card using Kid’s Choice Glue.

Step 6 – Stamp Joyful Wishes using Versamark Ink on Brick Red Soft Finish Cardstock. Diecut Diagonal Stitched Fishtail and adhere to the card using Foam Tape.

Step 7 – Optional – For added interest and sparkle adhere red jewels randomly using Kid’s Choice Glue.

This card was so much fun using one stamp set and makes a wonderful holiday card. Below is a link to all the products used. Thank you for stopping by and have a wonderful day.

Tina

1 Comment
Elizabeth Craft Designs General Joset Designs Planner Essentials

Step-By-Step: My September Week #3 Planner Spread

September 24, 2019

Hey Crafters! Katelyn here, sharing with you my September Week #3 planner spread for my planner.

To create this spread, I’ve used a variety of dies from the Planner Essentials collection and Joset Designs. I hope you enjoy my tutorial!

Step One. Choose some patterned paper (mine is from the Georgia Blues Collection). Die cut the page from the Planner Essentials – 4 page out of the paper. Die cut the page from the Planner Essentials – 2 page out of the paper. Apply Jet Black Archival Ink to the chicken wire stamp from the Background Stamp 1 and stamp randomly on each page. Reapply ink as needed. Apply Jet Black Archival Ink to the script stamp from the Background Stamp 2 and stamp randomly on each page. Reapply ink as needed. Apply Jet Black Archival Ink to the September month from the Months stamp set and stamp onto the tab on the left hand page. Distress the edges of each page. Ink the edges of each page using Black Soot Distress Ink and a blending tool with foam.

Step Two. Choose a patterned paper (mine is from the Spring Farmhouse collection). Die cut the reinforcement circles from the Planner Essentials – 1 die twice out of the patterned paper. Ink the edges of the 12 reinforcements circles using Black Soot Distress Ink and a blending tool with foam.

Step Three. Die cut seven labels from the Planner Labels die out of kraft cardstock. Apply Jet Black Archival Ink to the days of the week from the Schedule stamp set and stamp each one day of the week on each of the labels. Use a black pen to write in to-do’s on each label. Distress the edges of each label. Ink the edges of the label using Black Soot Distress Ink and a blending tool with foam.

Step Four. Choose another patterned paper (mine is from the Spring Farmhouse paper). From the Planner Essentials – 6 die, die cut two large rectangles out of the patterned paper. Distress the edges. Ink the edges of the rectangles using Black Soot Distress Ink and a blending tool with foam.

Step Five. From the Stitched Indented Rectangle die, die cut two 3″ rectangles out of the same patterned paper used for the reinforcement circles. Distress the edges. Ink the edges of the rectangles using Black Soot Distress Ink and a blending tool with foam.

Step Six. Choose another patterned paper (mine is from the Spring Farmhouse paper). From the Stitched Indented Rectangle die, die cut two 3 1/2″ rectangles out of the patterned paper. Distress the edges. Ink the edges of the rectangles using Black Soot Distress Ink and a blending tool with foam.

Step Seven. From the Diagonal Stitched Fishtails, die cut the 1 1/2″ fishtail twice out of kraft cardstock. Distress the edges of each fishtail. Ink the edges of each fishtail using Black Soot Distress Ink and a blending tool with foam.

Step Eight. Choose another patterned paper (mine is from the Spring Farmhouse paper). From the Diagonal Stitched Fishtails, die cut the 1 7/8″ fishtail twice out of the patterned paper. Distress the edges of each fishtail. Ink the edges of each fishtail using Black Soot Distress Ink and a blending tool with foam.

Step Nine. From the Diagonal Stitched Fishtails, die cut the 1 1/8″ fishtail twice out of the same patterned paper used for the large rectangles. Distress the edges of each fishtail. Ink the edges of each fishtail using Black Soot Distress Ink and a blending tool with foam.

Step Ten. Choose a flag from the Celebration Flags die. From the same patterned paper used for the 3″ stitched indented rectangle, die cut two of the flags out. Cut both flags down to 3 3/4″. From the same patterned paper used for the large rectangles, die cut two of the flags out. Cut one of the flags down to 4 1/4″ and cut the other flags down to 3 1/4″.

Step Eleven. Adhere six of the reinforcement circles to the left page. Adhere the other six reinforcement circles to the right page.

Step Twelve. Adhere the 1 1/8″ stitched fishtail to the 1 1/2″ stitched fishtail. Adhere the 1 1/2″ stitched fishtail to the 1 7/8″ stitched fishtail. Repeat for the other page. Foam square one of the stacked stitched fishtails to the left page 1 1/2″ from the left and 1″ from the bottom of the page. Foam square the other stacked stitched fishtails to the right page 1 1/4″ from the right and 1″ from the bottom of the page.

Step Thirteen. Adhere the 3″ stitched indented rectangle to the 3 1/2″ stitched indented rectangle. Adhere the large rectangle to the 3″ stitched indented rectangle. Repeat for the other page. Use adhesive and foam squares to adhere the stacked stitched indented rectangles to the left page 1/2″ from the left and 2″ from the bottom of the page. Use adhesive and foam squares to adhere the other stacked indented rectangles to the right page 1/2″ from the right and 2″ from the bottom of the page.

Step Fourteen. Adhere the Monday to Wednesday labels to the left hand page. Adhere the Thursday to Sunday labels to the right hand page.

Step Fifteen. In the top left corner of the left page, adhere the 3 3/4″ and 4 1/4″ flags. In the top right corner of the right page, adhere the 3 3/4″ and 3 1/4″ flags.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my September Week #3 planner spread.

Katelyn

Elizabeth Craft Designs Supplies:

Other:

  • Distress Ink: Black Soot
  • Blending Tool with Foam
  • Ranger Ink: Jet Black Archival Ink
  • Prima Marketing: Spring Farmhouse and Georgia Blues Collections
  • Misc: Black Journaling Pen and Kraft Cardstock

Joset Designs Krista Schneider

Summer Tag Trio

August 8, 2019

Hi there!

It’s Tanja here and today I would like to show you how to create this Summer Tag Trio.

Step 1: Die Cutting

  • Cut some custom tags using the largest of the Diagonal Stitched Fishtails
  • Add the hole with a hole punch

Step 2: Stamping

  • Stamp the images from the Sun & Surf set and the sentiments from the Beach Sentiments set with alcohol marker friendly ink

Step 3: Coloring

  • Color the images with Alcohol Markers and add extra shading with Faber-Castell Polychromos Pencils

Step 4: Ink Blending

  • Add some Distress Inks (Abandoned Coral, Mustard Seed, Peacock Feathers) to the tags with the help of a Blending Brush

Step 5: Finishing Touches

  • Thread matching twine through the holes of the tags

Have fun creating your own summer tags.

Hugs,

Supplies:

Others
Hole Punch
My Favorite Things Extreme Black Ink
Distress Ink (Abandoned Coral, Mustard Seed, Peacock Feathers)
Blending Brushes
Twine
Alcohol Marker
Faber-Castell Polychromos Pencils

2 Comments
%d bloggers like this: