Browsing Tag

#Elizabethcraftdesigns

Joset Designs Planner Essentials

In the Kitchen #DBD

November 23, 2022

Hi Everyone, Katie here with todays blog post! Today I am sharing one of my #decemberdbd ” In the Kitchen” which is day #23 featuring Josets Mrs. Clause die and Let’s Bake set! So while we are working on this page, grab a coffee and lets get started.

Start with cutting out your images from your favorite card stock and ink the edges with Vintage Photo Distress Ink. I also added some pink on her cheeks and assemble as per the package.

On my printer I typed out my word title and used a word banner from one of my other Planner Essential sets and then inked the edges.

With Planner Essentials 19 – cut your base page from Christmas Lives Here dark green paper. Then I cut the whisk head out of Silver foiled cardstock and the handle from Tim Holtz black distress card stock and ink it all with Vintage Photo Distress Ink.

Using the smaller rectangle die from Pocket Page Fillers 1, I cut a small plaid photo mat. Next I added all my pieces and only pop dotted Mrs. Clause and the rolling pin up top.

I hope you enjoyed todays blog post with my take on the #decemberdbd day #23, keep on eye out for my other pages that I will be posting on the ECD Planners & Journaling Page.

Thank you and happy Creating!! >Katie<

Elizabeth Craft Designs Supplies:

Joset Designs

A Mug Full of Warm Christmas Magic!

November 8, 2022

Hello all, Katie here thank you for joining me with todays blog post! I always love winter for hot chocolate, coffee or some yummy beverage to keep myself warm as we are getting very cold here in Alberta, Canada! So grab a cup of hot coffee and lets get started!

Step 1: Start with cutting out your images form Jack Frost and Warm Winter Mug from your favorite Cardstock. Next I inked the edges with Vintage Photo Distress Ink (Oops I just noticed my holly was flipped upside down for the picture) and assemble your pieces.

Step 2: Out of the new Nested Tags Set cut out two of the largest tags, I used my scoring tool and created a crease at the top, this will create the fold to make this into a card base. Next, I used a 3D embossing folder to create a pattern on my tag, then I lightly inked it with Brushed Corduroy Distress Ink.

Step 3: Assemble your card as per the picture above, I pop dotted the mug on top of the snowman.

Step 4: After I have assembled my card front I attached the back of the card to the card front and folded slightly at the score line.

Step 5: My favorite part is speckling the card front with Heavy White paint.

Thank you for joining me today, I hope my post brought you some inspiration!

Happy crafting all and stay warm! till next time >Katie<

Elizabeth Craft Designs Supplies:

Elizabeth Craft Designs General Joset Designs

Sparkling Christmas Card

October 24, 2022

Hi Everyone, Katie here thank you for joining me with todays blog post! I am super excited to show you this amazing new stocking die from Joset’s new Christmas Collection, and of course I am using a ton of glitter. So grab a cup of coffee or tea and lets get started!

Step 1: Cut your stocking from your favorite card stock, next selected a 3D embossing folder and run it through your machine to give it some dimension. Next, I took my Vintage Photo Distress Ink and lightly inked the 3D pattern.

Step 2: Next apply your 2-way adhesive onto your strip of white cardstock and cut your stocking trims. I then peeled back the adhesive backing and add your choice of glitter. I used green for this sample but on my card I used Cool White Microfine glitter. (There are so many beautiful glitter choices)

Step 3: After you have assembled your stocking, cut your card front bases.

Cut your white base 4 1/4 “x 5 3/4 “and stamp your sentiment on the bottom from Joset’s new Holiday sentiments, I used “Christmas Magic”. Cut your green mat 4 1/2″ x 6″ , red mat 4 3/4″ x 6 1/4″ and your card base 6 1/2″ x 10″ scored @ 5″ 1/2″. Assemble your card as per the picture.

Step 4: With the same process by applying adhesive to card stock I cut out some holly leaves and berries from Winter Greens and applied glitter.

I pop dotted my stocking to the front of the card, added my glitter holly, added gems and speckled with white acrylic paint.

And we are done, I hope you enjoyed todays block post! I look forward to my next months post using Joset’s new Character Mrs. Clause creating a super cute baking Planner Essential page.

Take Care all and Happy Crafting >Katie<

Elizabeth Craft Designs Supplies:

1995 Holiday Stocking – Coming soon at Elizabeth Craft Designs

Joset Designs

Embossed Christmas Card

October 14, 2022

Good day crafty friends, thank you for joining me with todays blog post! I am super excited that I started on my Christmas Cards so I wanted to show you how I created this super easy but elegant card. So grab a coffee or tea and lets get started!

Step 1: Card Measurement 4 ¼ x 11 score in half.

Step 2: Stamp 3 flowers from the Peace Stamp set and Emboss with gold detailed embossing power, fussy cut the three flowers and put aside.

Step 3: Cut your white card base at an angle. Next attach your gold card stock. (As per picture above)

Next, place your card in your paper trimmer and cut your gold cardstock at an angle (as per picture above)

Step 4: Add your designer paper of choice.

Step 5: Add your gold embossed word, pop dot your three fussy cut poinsettia flowers, add your twigs from Winter Greens cut from gold card stock and gems. Last I speckled with Iced Spruce Distress Spray.

Joset Designs Planner Essentials

Making a start to my October Planner!

September 29, 2022

Hi all, thank you for joining me with todays blog post. Fall and Halloween is one of my favorite times of the year so I wanted to create this fun title page to start my month of October and nothing says October like Pumpkins, leaves and an owl witch. So grab a Pumpkin Spice Latte and lets begin!

Step 1: Cut out your images ( I used a lot of different sets from Joset’s collection see sets below) from your favorite cardstock and ink the edges with distress ink.

Next cut out your planner page and ink blend them with Black Soot, Villainous Potion and Shaded Lilac as per the picture above.

I sprinkled my page with water and dabbed it with a paper towel and set it aside to dry.

Once the page is dry I attached my tree and pop-dotted my owl. Next, add your spiders web, pumpkin and pop-dot your Jack-o’-lantern. Add your leaves, spider and your October title. Last step is to speckle with white heavy body paint.

Thank you for joining me today and have a crafty happy day!

>Katie<

Elizabeth Craft Designs Supplies:

Joset Designs Paper Flowers

Be Merry holiday interactive card

September 13, 2022

Hi Everyone, Thank you for joining me today to make this super fun interactive Christmas Card using Joset’s Santa’s Sleigh and florals #12. So grab a coffee sit back and lets get started.

Step 1: Take your colored cardstock and cut it @ 5 1/2″ x 8 1/2″, score along the 8 1/2″ side @ 2 1/8″ and 5 1/2″, cut your card front 5 1/2″ x 4 1/4″ and set aside.

Step 2: fold up your score lines and add glue as per the picture above and attached your card front, you will want to line the card along the bottom, as per picture below.

Step 3: With your choice of cardstock cut out your sleigh, with silver card stock cut out your sleigh runners. I took a light sanding block and lightly sanded the runners and then inked the edges with vintage photo distress ink. Next I cut out a few flower petals from florals #12 from a coordinating designer paper and created my poinsettia style flower. Next I added green leaves and cut out 2 gold stems from Winter Greens.

Step 4: With the Classic Christmas sentiments set, stamp Be Merry and Season’s Greetings with embossing ink and emboss with gold detailed embossing powder and heat set.

Step 5: Out of White Cardstock cut 3 3/4 x 5 and run it through your choice of 3D embossing folder.

Step 6: Assemble your white dot background to your choice of designer paper and attached to your card base, next I attached my sleigh and Be Merry Quote. I pop dotted my florals #12 flower, leaves and gold branches. Once my card is assembled I speckled my card front cover with heavy body white paint and a metallic gold paint to give my card some shimmer.

Step 7: Attach your designer paper to the inside of your card and your Season’s Greetings quote and speckle the inside of your card with gold and white heavy body paint.

I hope you enjoyed my blog post today, if you have any questions about this technique please feel free to reach out to me via Facebook.

Have a wonderful day and happy creating >Katie<

Joset Designs

Fun Fold Fall Card

August 29, 2022

Hi Everyone, thank you for joining me today for this fun folded fall card. I love all things fall the changes to the colors of the leaves, pumpkins, scarecrows, corn mazes, plaids, warm sweaters and a hot cup of coffee. So grab a cup and lets get started.

Step 1: Cutting and scoring your card base – start with a heavy card base and cut your paper 5 1/2 x 8 1/2, along the 8 1/2 side score at 2″, 3 1/8″, 5 3/8″ and 6 1/2. Your designer paper cut 2 @ 1 3/4″ x 5 1/4″, 2 @ 3/4″ x 5 1/4″ (Sides) and 1 @ 2″ x 5 1/4″ (front panel). Next I inked my papers with Vintage Photo Distress ink and set aside. Next fold up your score marks so the front of your panel is folded upwards. Please see picture above and below.

Step 2: Adhere your inked paper strips to your card base.

Step 3: Using the new Pocket Page Fillers 1, use the two smaller rectangles and cut 1 small rectangle from heavy mixed media paper and the medium rectangle to cut the the green plaid rectangle. Next I took my Distress Ink Peeled Paint and smooched it onto my mixed media mat and spritzed it with water, then I took my mixed media paper and dabbed it into my ink smooch. (As per above) After it was dried I added my word sentiment “Hello Fall” .

Step 4: Cut out your scarecrow, pumpkin, leaves and crows out of you choice of cardstock. I inked all the edges with Vintage Photo Distress ink and assembled as per the picture above.

Step 5: I attached my mixed media paper to my plaid background, I added my pumpkin and pop-dotted the top of my pumpkin, added some leaves and pop-dotted my scarecrow. Last step is speckling the card with heavy body white and brown paint.

Here is a look at the card before going into the envelope.

I hope you enjoyed todays Fun Folded Card, Have a wonder day and happy crafting! >Katie<

Joset Designs

Pop-up Shaker Snowman Card!

August 8, 2022

Hi friends, thank you for joining me today with this super cute pop-up shaker card. Its so hard to capture all the glitter on this card with a photograph so I am hoping you make your own so you can see how amazing this glitter that Els uses all the time really is. So lets get started!

Step 1: Attach a piece of your adhesive sheet to your heavy weight cardstock (Keep the backing onto your adhesive sheet as this is where you will add your glitter) cut your card front to 4 3/4 x 5 1/4, next with your adhesive side facing up , take your large snowflake die from the Art Journal Christmas Special and cut out the snowflake from the center of your page.

Step 2: Peel off the adhesive backing so your front card base is sticky and add your glitter, you will be surprised how little it takes to cover your page. Tap off the extra glitter, then attach a piece of acetate to the back of your front base covering your snowflake.

Step 3: Next, add some foam tape to all four sides of the back of my snowflake page closing the gaps so none of my shaker bits come out, I removed three side of my foam tape and placed it on top my card base that measures 5 x 5 1/2, next I filled my shaker bits through the space where the adhesive is still attached to the foam tape, once I have enough bits I removed the backing and sealed my shaker card. (Please see picture above)

Step 4: Cutting the base of the card, Take a heavy white cardstock and cut your card base 5 1/2 x 11 and score along the 11″ side at 5 1/2 and 2 3/4 and fold up your score lines as per picture above.

Step 5: Next attach your snowflake shaker to the bottom part of your folded card, this creates an easel style card.

Step 6: Out of your favorite cardstock cut out Jack frost from Joset’s collection, once you have assembled and inked your snowman, speckle with heavy body white paint.

Step 7: Attached your snowman using pop dot to the top of the card base, I also added a few jewels.

Step 8: I added a greeting from Classic Christmas Sentiments #CS101 and I cut out a few snowflakes from the Classic Christmas Collection kit and glittered my snowflakes. Next I pop dotted my greeting this creates a lip for your easel card.

I hope you enjoyed todays blog post and I am hoping you will join in and create a special glitter Christmas Card!

Have a wonderful day and Happy Crafting!

>Katie<

Elizabeth Craft Designs Supplies:

Joset Designs

Monster pop-up tags!

July 13, 2022

Hello crafty friends, I am bringing in the Monsters both Christmas and Birthday for todays blog post!! These cute tags come with a bit of a twist as the Birthday Tag is a small Garbage Can pop-up card. I hope you enjoy todays post and lets get stared!

Step 1: Out of dark grey card stock cut 4 x 11 & score in half, cut your card by laying the garbage can die just above the fold line, then run it through your machine. Next out of light grey cardstock cut out your garbage can and lid, I also created a handle by re-cutting the lid from black cardstock then I trimmed the handle and adhered it the the light grey handle.

Step 2: Line the pop-up die along the score line of your garbage can card and run it through your machine to create the pop-out. See picture below.

Step 3: out of Josets cute Monster sets cut both creatures from red, orange and other coordinating cardstock. I inked all my edges with Vintage Photo Distress Ink and assembled. Next I cut out the balloon, stars, cake, birthday hat and party pieces ink and assembled.

Step 4: Create your card front by attaching all your creatures as per picture above using your favorite adhesive.

I added some glossy accents to the stars and the top of his Birthday hat.

Step 5: I added my cake, party favors and quote from the Monster Hugs stamp set to the inside of my pop-up tag. Last step is Speckling with a heavy body white paint and a fan brush*Optional*

To get a jump start on your Holiday creating, I just wanted to share with you another creative way to make your Holiday Tags or Garbage Can pop-up tag using different Christmas sets designed by Joset.

I hope you enjoyed todays blog post and brought a bit of creative inspiration to your day!! Take Care and happy crafting! >Katie<

Joset Designs

Happy Canada Day!!

June 30, 2022

Thank you for joining me today, here is my festive Canada Day blog post. This year Canada is celebrating 155 years as a nation and I could not think of a better way to celebrate Canada Day than to make this cute card for a few close friends. As they are also celebrating their birthday’s too. So let’s get started.

Step 1: Out of mixed media card stock I used Oxide Ink and started with Twisted Citron, next I blended in my Rustic Wilderness oxide ink. I then added Tumbled Glass and blended along the top with Unchartered Mariner (Which by the way is my new favorite new color for the oxides). Last step using my fan brush I splattered with water and dabbed it with some paper towel, set it aside and let it dry.

Step 2: Next I cut the Moose and Beaver critters from Joset’s Collection. The Beaver was cut from kraft cardstock and colored over with Rusty Hinge Oxide (This gives the beaver a more reddish brown fur). I cut the moose from a medium brown, dark brown and grey card stock and inked the edges with Vintage Photo Ink. For the Canadian flag I cut a heavy piece of white cardstock 2 1/2 x 1 1/2 and the red cardstock strips are 5/8 x 1 1/2, I lightly inked the edges with vintage photo distress ink. Next I used my Turkey die set and cut the leaves from red cardstock and used the Maple leaf in the center of my flag. The trees where cut from the Mason Jar set out of medium green and inked with Vintage Photo distress ink.

Step 3: I attached my tree first only adhering along the center of the tree, this allows you to lightly fold up the branches giving it a 3D look. I added the small tree from the collection next to the large tree. I double pop dotted the moose over the smaller tree bending out the lower branch over the moose. Next I added pop dots onto the beaver and the back of the flag. I used a miscellaneous curved die for the flag pole. ** Last step I like to take a white heavy body paint and speckle my card.**

I hope you enjoyed todays blog post and brought you some inspiration, Have a wonderful creative weekend!

>Katie<

Elizabeth Craft Designs Supplies:

%d bloggers like this: