Browsing Tag

Florals 2

Uncategorized

My Hero

June 4, 2021

Good morning! Laura here today to share my next layout I created for ECD!
I really like to mix my papers from different collections as long as the color families are the same so for this layout I mixed some papers from the Mystical Winter paper pack, the Rusty Weathered and the Summer Art!

 

To create this layout:
Step 1 – Trim one paper to 11×7 and distress the edges, distress the edges of a 12×12 sheet and cut a ‘V’ into the top right of both papers about 2 1/2 ” from the edge. Cut one more piece of paper large enough to be adhered behind the cut ‘V’
Step 2 – adhere all the papers together and then cover with clear gesso and allow to dry

Step 3 – using watered down paints paint circles randomly in various sizes and also splatter some paint

Step 4 – Die cut 7 flowers and assemble. I die cut Florals 6, 8, 1, 2, 3, and 4 using white cardstock then painted them with the watercolor palette.

Step 5 – add your title

Step 6 – add some resin pieces, seed beads, art stones and cord to finish your layout!

Than you for stopping by and I hope I have inspired you to create something today!
~Laura

Uncategorized

The Best Things About Memories

May 18, 2021

Good morning!
One of my favorite subjects to scrapbook is the beach!

To Create this layout:

Step 1 – Cover your paper with clear gesso then trim your paper (I used a paper from the Summer Art pack) to 11.5×11.5

Step 2 – use texture paste and your favorite ECD stencil (I used the Spring Flower Mandela) on the left side middle
Step 3 – use gel medium and another stencil on the rest of the paper (I used the circles from the pattern stencil pack)

Step 4 – distress the paper edges and adhere to a 12×12 sheet with distressed edges


Step 5 – die cut a scalloped circle and just the circle using the Pizza box die set and stamp a sentiment on the circle I used the Pieces of Life 3 stamp set

Step 6 – die cut a mandala and ink the edges

Step 7 – die cut, ink and assemble 7 flowers – I used the florals 6, 8, 1, 2, and 3.
Step 8 – Assemble as shown adding art stones, seed beads, [earls, acrylics and cheese cloth

Thanks for stopping by
Laura

Scrapbooking

Good Job – Graduation Layout

May 4, 2021

Good morning! 
I am not a chronological scrapbooker. I scrapbook whatever I am inspired to, whenever I am inspired to, so I may scrapbook a photo from when our boys were little or from a couple of years ago when one of them graduated from high school. I find that I am much happier with my creations when I am inspired to create something. The beautiful colors from the Rusty Weather paper inspired me for this layout.

To create this layout:
Step 1 – Trim our papers to the following sizes: 1 at 12″x12″, 1 at 12″x11″, 1 at 12″x7″ and 1 at 12″x6″ and a photo mat. Distress all edges.

Step 2 – Die cut, ink and assemble 10 flowers and 4 leaves. I used florals 6, 8, 9, 1, 2, and 4.

Step 3 – Create your title and assemble as shown!

Thanks for stopping by
Laura

Elizabeth Craft Designs Supplies:

Watercolor Palette

You Make Me Smile

April 20, 2021

Good morning everyone!
I am so excited to share my next layout with you!

To create this layout:
Step 1 – Cover your favorite ECD paper with clear gesso and heat set or allow to dry – there are some beautiful papers to choose from here
Step 2 – Use your favorite ECD stencil (I used one from the pattern stencil pack) and texture paste randomly on your page. Heat set or allow to thoroughly dry

Step 3 – Randomly stamp on and around where you added texture paste with a an ECD stamp of your choice (I chose the Frosty Patterns stamp)
Step 4 – using a coordinating color from the watercolor palette sprinkle watercolor paints over the images then heat set

Step 5 – On photo paper indiscriminately add texture paste and heat set, then paint using at least 2 watercolor paints and heat set till dry
Step 6 – Die cut 2 tags from Planner Essentials 7, and 2 elegant ornament (trimming the circle from one)

Step 7 – die cut one mandala
Step 8 – die cut, ink and assemble 8 flowers using your favorite ECD dies like Florals 7, Florals 6, Florals 8, Florals 1, and Florals 2
Step 9 – Mat your photo and distress the photo mat edge

Step 10 – assemble as shown adding some art stones, seed beads, the discarded circles from the elegant ornament and paper clay or resin pieces painted with the watercolor paints

Thanks so much for stopping by!
Laura

Paper Flowers Scrapbooking

Love This

April 6, 2021

Good morning!
I am so excited to share my next layout for my nieces upcoming wedding!

To create this layout
Step 1 – gather 2 sheets of 12×12 paper, create ‘indents’ on your top sheet and distress the edges of both. (I used the Summer Art paper pack)
Step 2 – fussy cut 5 flowers from the paper or die cut 5 flowers using your favorite dies

Step 3 – die cut 2 Mandala’s
Step 4 – die cut, ink and assemble 3 of your favorite florals – I used Florals 8 and Florals 6
Step 5 – Die cut 3 of your favorite leaves – I used the leaves from florals 2

Step 6 – Die cut the top floral of the pizza box then trim the square off
Step 7 – Assemble as shown and enjoy!

Thanks so much for stopping by!
Laura

Elizabeth Craft Designs Supplies:

Scrapbooking

Winter

January 6, 2021

Good morning!
Almost every winter we as a family go sledding and we have a great day!

To create this layout:
Step 1 – cover the background paper with clear gesso (I used a paper from the Mystical Winter Collection)
Step 2 – stamp the image from the Frosty Patterns at the top, bottom and side

Step 3 – use texture paste and a stencil from the Pattern Stencil Pack along the one side and allow to dry
Step 4 – Die cut, ink and assemble 14 – 15 flowers (I used florals 1, 2, 3, 4,)
Step 5 – die cut 2 cubic background out of coordinating cardstock. Highlight the word Winter by using snowflake paste or glitter
Step 6 – die cut 2 Diagonal Stitched Fishtails

Step 7 – mat your photo and assemble the photo area as shown
Step 8 – using some frayed cheese cloth run a piece from the top to the bottom on the one side and one from side to side in the middle


Step 9 – ink 5 chipboard snowflakes and add some silk Cool Diamond Silk Microfine Glitter

Step 10 – start adhering flowers

Step 11 – add snowflake paste to florals, chipboard and paper
Step 12 – add some seed beads

Thanks so much for stopping by!
Laura

Elizabeth Craft Designs Supplies:


Elizabeth Craft Designs General Joset Designs Paper Flowers Planner Essentials Soft Finish Cardstock

Happy Holidays Gift Tag

November 24, 2020

Hey Crafters! Katelyn here, sharing with you my Happy Holidays Gift Tag.

To create my Gift Tag, I’ve used dies from the Paper Flower Collection as well as a die from Joset Designs and the Planner Essentials Collection. You’ll want to read below as I share with you how to recreate my gift tag at home.

Step One. Choose a piece of patterned paper out of the Worn Wood Paper Pack. Die cut the large tag from the Planner Essentials – 2 die out of the patterned paper. Ink the edges of the tag using Walnut Stain Distress Ink and a blending tool with foam.

Step Two. Die cut the small plain circle from the Pizza Box die out of White Soft Finish Cardstock. Choose a piece of green patterned paper out of the Reminiscence Paper Pack. Die cut the stitched circle from the Pizza Box die out of the patterned paper. Ink the edges of both circles using Walnut Stain Distress Ink and a blending tool with foam.

Step Three. Die cut the two swirls from the Strawberries die out of a piece of silver foil.

Step Four. From the Florals 2 die, you’ll need the medium, small and extra small flowers. Die cut the three size of flowers twice out of White Soft Finish Cardstock. Using a blending tool with foam, blend Fired Brick Distress Ink over the entire surface of all the flowers.

Step Five. From the Florals 2 die, you’ll need all the leaves. Die cut the two different single leaves twice out of White Soft Finish Cardstock. Die cut the two leaf leaf out of White Soft Finish Cardstock. Using a blending tool with foam, blend Forest Moss Distress Ink over the entire surface of all of the leaves.

Step Six. From the Words 3 – Happy Holidays Die, you’ll need the Happy Holidays words. Choose a piece of Red patterned paper out of the Reminiscence Paper Pack. Die cut the words out of the red patterned paper.

Step Seven. Adhere the white circle to the green stitched circle. Foam square the green stitched circle to the middle of the tag.

Step Eight. Shape all the flowers. Adhere the three size flowers together. Repeat for the second flower. Put a Transp. Glitter/Gold Dot in the centre of each flower.

Step Nine. Shape all the leaves. Adhere two of the single leaves to the top left corner of the tag. Adhere two of the single leaves to the bottom left side of the tag. Adhere the two leaf leaf in the middle of the tag on the left hand side.

Step Ten. Foam square the two flowers over top of where the leaves meet.

Step Eleven. Adhere one of the swirls to the top right of the leaves at the top of the tag. Adhere the other swirl to the bottom left of the leaves at the bottom of the tag.

Step Twelve. Adhere the Happy Holidays words to the right of the flowers as desired. To finish the tag, tie a piece of twine through the top of the tag.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Happy Holidays Gift Tag at home.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Forest Moss, Fired Brick and Walnut Stain
  • Blending Tool with Foam
  • Misc: Silver Foil Paper and Twine
Scrapbooking

Summer

November 11, 2020

Good morning!
Laura here today to share a summer layout!

To create this layout:
Step 1 – Using your favorite ECD papers (I used Summer Art) have one 12″x12″ or 30cm x 30cm paper, trim another to 3″x6″ or 7.5cm x 15.25cm, and trim one more 4″x 7.25″ or 10.15cm x 18.5 cm, and one at .75″x 6″ or 2cm x 15.25cm Ink all the edges of the papers
Step 2 – using coordinating cardstock die cut 4 silhouetted circles of varies sizes using your favorite ECD circle die (I used stitched circles) and 3 silhouetted rectangles and 1 full rectangle of various sizes (I used stitched rectangles)

Step 3 – Die cut, ink and assemble 9 of your favorite ECD flowers (I used Florals 2, and florals 3)
Step 4 – Die cut 1 film strip, 2 small filmstrip from Planner Essentials 24, one dragonfly and the summer word and shadow from the Summer Art set from coordinating cardstock. Ink all the edges.

Step 5 – Mat your photo
Step 6 – Assemble as shown

Thanks for stopping by
Laura

Elizabeth Craft Designs Supplies:

A Way With Words Uncategorized

Always and Forever

October 10, 2020

How many COVID weddings have you attended in 2020? If there was ever a time to make a special wedding card, this is the year! I know many brides who have had to change their wedding plans to something smaller and even online. I had a great time making this card to suit someone in particular – a bit rustic, a touch of blush with some elegant lettering.

I started with some paper from the Through the Lens-Wood which I think is discontinued but the new Worn Wood collection is just beautiful and would work also. I lightly sponged the edges of this Florals 1 dies with a light pink ink and the leaves from Florals 2 with different shades of green Distress Oxide Inks. The paper is muted with a sheet of vellum (glued on the corners which will be where the flowers go so that the glue markings will be hidden) so that the words will pop a little more.

I like to have all my pieces cut and colored so they are ready to go. I’ve also learned that having extras is faster going back and preparing them.

I glued all my pieces as shown above, adding some trimmed off berry branches. As you can see, I used some white craft drops for the berries. The center of the flowers I used some light yellow chunky glitter. I did not like the end results much so I went back and added a ring of glue around the yellow glitter to add a green chunky glitter. I love it now!

The flowers frame a simple white sentiment made from different word dies – I do love mixing up these dies to form my own sentiment.

Before I popped it onto my 5 x 7 card base, I did add a bit of olive green matting to my wood piece.

I love how dimensional this card is and that all the colors are a bit muted.

Thank you so much for looking!

Elizabeth Craft Designs products used:

Other products used:

White and Olive Green cardstock

Distress Oxide Inks

Chunky glitter

Uncategorized

Heavenly

October 6, 2020

Good morning!
I am excited to share my next creation for Elizabeth Craft Designs!
I am IN LOVE with the new Summer Art paper line and I finally got a chance to create with it….the designs and colors are outstanding!

To create this layout:

Step 1 – cover both sides of your paper with clear gesso ( I used the Summer Art Collection)
Step 2 – mix texture paste with a coordinating color of colorant (I chose tainted love teal from Lindys Stamp gang)
Step 3 – use your favorite ECD stencil and the colored texture paste approximately 2.5″ or 6 cm from the left hand side of your paper (I used the waves stencil)
Step 4 – while texture paste is still wet sprinkle Silk Microfine Glitter at top the image (I used copper)

Step 5 – place two pieces of cheesecloth (1 at least 12 inches or 30.5 cm long and one about 8 inches or 10cm ling) in a resealable freezer bag and color with your favorite mist or powder. (I used Lindy’s magical powders in Cowabunga copper and Hags Wart Orange). Remove from bag with tweezers or wearing gloves and dry with your heat gun
Step 6 – adhere the cheesecloth as shown in photos

Step 7 – fussy cut two small flowers, one large flower cluster, a turtle and a set of leaves from the paper and ink the edges

Step 8 – die cut three of your favorite ECD flowers (I used florals 2, florals 1, and florals 3) and assemble remembering to ink the edges
Step 9 – die cut an elegant ornament, palm tree and stem from the Summer Journal Special and an anchor, then ink the edges

Step 10 – grab your favorite chipboard title and heat emboss twice, on the third embossing sprinkle silk microfine glitter into the while you are heat setting the embossing powder. I do not normally take photos in direct sunlight but I wanted to share the glitteriness of the effect
Step 11 – create a photo mat, ink the edges of the mat as well as the background paper. Adhere everything as shown and add some seed beads!

Thank you so much for stopping by!
Laura

Elizabeth Craft Designs Supplies:

%d bloggers like this: