Browsing Tag

Jack Frost Dies

Elizabeth Craft Designs General Joset Designs

Joyful Wishes Mini Slimline Card

November 21, 2021

Hi everyone, it’s Tina here. I had my Jack Frost dies out and I wanted to create a female snowman so I took out my inks and some older Elizabeth Craft Design Products and love how it all came together. Below you will find the steps to create your own card.

Step 1 – Trim White Soft Finish Cardstock to 7” x 6”, score at 3 1’2” and fold in half for a vertical side fold card. (Mini Slimline)

Step 2 – Trim White Soft Finish Cardstock to 3 1/4” x 5 3/4”. Apply any inks of your choice using a Blender Brush. I wanted a rainbow sky. I used a pink, orange, yellow, green and blue ink. I splashed some water. You can see I had an accident as a big blob of water spilled on my background. I decided it was a happy accident and went with it. Let dry then adhere to card using 3mm Clear Double Sided Adhesive Tape.

Step 3 – Diecut Village Edges using White Soft Finish Cardstock. Adhere to card using 3mm Clear Double Sided Adhesive Tape to the snowbank only.

Step 4 – Diecut Jack Frost and Winter Accessories in various colors of cardstock, use the same color inks on White Soft Finish Cardstock. Assemble and adhere to card using Kids Choice Glue.

Step 5 – Stamp Holiday Sparkle sentiment using the same pink ink used in the background.

Step 6 – Diecut Diagonal Fishtail using the sentiment from step 5. Adhere to card using 3mm Clear Double Sided Adhesive.

This is a fun card to put together. You can change it up by changing it to a male snowman and/or changing the colors. Below is a link to all the products used. Thank you for stopping by and Happy Crafting!

Products Used:

Elizabeth Craft Designs General Joset Designs

Sending You A Flurry Of Love Mini Slimline Card

November 8, 2021

Hi everyone, it’s Tina here. I have a fun Holiday card to share with you using the Jack Frost dies and Classic Christmas Special Snowflakes dies and the stamp set. Below are the steps to create your own card.

Step 1 – Trim White Soft Finish Cardstock to 7″ x 6″, score at 3 1/2″ and fold in half for a vertical side fold card. (Mini Slimline)

Step 2 – Trim White Soft Finish Cardstock to 3 1/2″x 6″. Apply Inks of your choice using a Blender Brush. I used 3 inks in the same color family going light in the center and blending it out to a darker shade. Spray some water and pick up the excess with a paper towel and let dry. Adhere to card front using 3mm Clear Double Sided Adhesive Tape.

Step 3 – Diecut Snowflakes from the Classic Christmas Special kit and adhere to the panel created from Step 2 using Kids Choice Glue.

Step 4 – Diecut Jack Frost in various colors of cardstock. Assemble using Kids Choice Glue.

Step 5 – Diecut Adventure Edges (hill die) using White Soft Finish Cardstock (x2). Adhere the bottom to the card using 3mm Clear Double Sided Adhesive Tape.

Step 6 – Stamp Holiday Sparkle sentiment using Versafine Onyx Black Ink to the second Hill created from Step 4. Adhere to card using 3mm Clear Double Sided Adhesive Tape. Add Jack Frost created from Step 3 with Kids Choice glue with the left foot out and right foot under the top hill.

This card can be mass produced but change it up by changing the background colors and/or changing the accessory colors. Below is a link to all the products used. Thank you for stopping by and Happy Crafting!

Products Used:

Uncategorized

Jingle All The Way Card

January 4, 2021

Hi everyone, it’s Tina here. Before we get started I would like to wish you all a Happy New Year and better days!

Today I am sharing a card combining different product from Elizabeth Craft Designs. I mixed Joset Designs, Sue Stamps and Planner Essentials to create this super cute Slimline Card. Below is the steps to create your own card.

Step 1 – Trim White Soft Finish Cardstock to 7” x 8 1/2”, score at 3 1/2” and fold in half for a vertical side fold card. (Slimline)

Step 2 – Trim White Soft Finish Cardstock to 3 1/4” x 8 1/4”. Apply Distress Oxide Ink using an ink applicator starting from the bottom in the lightest color. I used Tumbled GLass, Salty Ocean, Chipped Sapphire and Black Soot. Optional – Add Gouache onto an acrylic block and spray it with a little water. Using a paintbrush splash onto the background created to give the illusion of snow. Let dry.

Step 3 – Stamp Hugs sentiment (Jingle All The Way) using Versamark onto the panel created from Step 2. Sprinkle White Embossing Powder and remove the excess. Heat set it with a Heat Tool. Adhere to card front using 3mm Clear Double Sided Adhesive Tape.

Step 4 – Diecut Planner Essentials 12 Arrow Page & Trees using Green Cardstock for the tree with holes, Red Metallic Cardstock for the solid tree and Gold Glitter Cardstock for the star. Assemble using Kids Choice Glue. Adhere to card using Kids Choice Glue.

Step 5 – Diecut Adventure Edges 2 using White Soft Finish Cardstock x 3 in different positions. Adhere to card using Kids Choice Glue layering each panel.

Step 6 – Diecut Jack Frost & Winter Accessories using White Soft Finish Cardstock for the snowman, Red and White Cardstock for the hat, Red for the scarf and black for the eyes and buttons, orange for the nose. Assemble and adhere to card using Kids Choice Glue.

Step 7 – Diecut Penguin using Black and White Cardstock for the Penguin, orange for the feet and Blue for the scarf. Assemble and adhere to card using Kids Choice Glue.

I used the Red Metallic beneath the tree holes because when you move the card and the light hits it it gives the illusion of flashing lights. Below is a link to all the products used. Thank you for stopping by and Happy Crafting!

Products Used:

Cardmaking Elizabeth Craft Designs General Joset Designs Silk Microfine Glitter Soft Finish Cardstock

You’re Cool!

December 27, 2020

Hello! Welcome – Samantha here. With Christmas done for another year I wanted to share a card that stretches the use of Christmas themed dies. I’ve partnered the Jack Frost die with Cute Winter Sentiment stamp to create this fun general card perfect for any time of the year.

Card Instructions:

Step 1: Create a card front using light blue card (Card Measurement: 10.5cm x 14.5cm).

Step 2: Using white soft finish card die cut the snowy ground using Adventure Edges dies. Adhere these to the card as shown below.

Step 3: Using a different shade of light blue die cut the three snowflakes from the Snow Globe die – adhere these to the card.

Step 4: (Optional) Add machine stitched details.

Step 5: Die cut all the Jack Frost pieces and assemble him onto the card front.

TIP: I enjoy adding texture to a card – using felt material was an great way to make Jack Frost look and feel like a fluffy snowman and it die cut perfectly with Elizabeth Craft Design dies.

Step 6: Stamp the sentiment, trim and using foam tape adhere it to the card front.

Step 7: Adhere the googly eyes. Die cut additional Jack Frost buttons to use as snow drops on your background.

Step 8: Embellish with some sequins, and a twine bow. Switch out the die cut Jack Frost paper buttons for some gems/enamel dots to add additional interest to the card.

Step 9: Adhere card front to an A6 card base.

Thank you for stopping by – I hope you had a wonderful Christmas and that you get some time during the holiday season to continue using these beautiful Christmas themed dies for some not so Christmassy cards.

Happy Crafting!

Samantha

Elizabeth Craft Designs:

Other:

Blue/Light Blue Card

Corrugated Card

White Felt Material

Sequins

Googly Eyes

Twine

Die-Cutting Machine

Clear Stamping Block

Gluedots/Foam tape

Scissors/Paper Trimmer

Black Dye Ink

Sewing Machine

Liquid Adhesive – Glue Pen

Pencil/Eraser

Joset Designs

Winter Wishes And Snowflake Kisses Card

December 17, 2020

Hi everyone, it’s Tina here. Lately I have been combining Joset Designs with Art Journal Product. I absolutely love that the Art Journal Dies and Stamps can be used on Cards and Scrapbooking. Below you will find the steps to create your own card.

Step 1 – Trim White Soft Finish Cardstock to 11” x 4 1/4”, score at 5 1/2” and fold in half for a horizontal top fold card. (A2)

Step 2 – Trim Red Cardstock to 5 1/2” x 4 1/4”. Place the circle stencil from the Pattern Stencil Pack on top of the Cardstock. Apply Texture Paste over the stencil using a spatula. Remove the stencil and let dry. Repeat this step to the other half of the panel. Let dry. Adhere the panel to the card front using 3mm Clear Double Sided Adhesive Tape.

Step 3 – Trim Red Cardstock to 4 1/2” x 3 1/4”. Apply Distress Ink Aged Mahogany to the edges. Adhere to card front using 3mm Clear Double Sided Adhesive Tape.

Step 4 – Diecut Create A Wreath using Green and Brown Cardstock. For added interest apply Craft Drops Metallic Gold to the Green foliage and Craft Drops White, Pearl Rose and Metallic Gold to the berries. Let Dry. Adhere to top of card using Kids Choice Glue.

Step 5 – Diecut Jack Frost and Winter Accessories (hat) in various colors of Cardstock. Assemble and adhere to card front using Kids Choice Glue.

Step 6 – Diecut Holiday Elf – Hers using various colors of Cardstock. Assemble and adhere to card front using Kids Choice Glue.

Step 7 – Stamp Joyful Wishes Sentiment (Winter Wishes & Snowflake Kisses) to the inside of the card using Versafine Onyx Black Ink. (Normally I add the sentiment to the front but I didn’t want to cover the scene I created.)

I absolutely love the snow texture scene I created using the Pattern Stencil Pack and I will be using them more to create backgrounds for my cards. Below you will find a link to all the products used. Thank you for stopping by and Happy Crafting! My next post will be in January so I want to wish you all Happy Holidays!!!

Products Used:

Uncategorized

Joy ‘Tis The Season Card

December 2, 2020

Hi everyone, it’s Tina here. Today I have a super adorable Holiday card to share with you using the new Jack Frost and Winter Accessories dies. Below you will find the steps to create your own card.

Step 1 – Trim White Soft Finish Cardstock to 11” x 4 1/4”, score at 5 1/2” and fold in half for a vertical side fold card. (A2)

Step 2 – Trim Unconventional Xmas Patterned Paper to 5 1/2” x 4 1/4” and adhere to card using 3mm Clear Double Sided Adhesive Tape.

Step 3 – Diecut Jack Frost 2 times using White Soft Finish Cardstock for face and main body and Coloured Cardstock for the accessories. Diecut Winter Accessories (hat) in Coloured Cardstock. (Optional) for the trims on the hat and mitts use Glitter Cardstock for some added sparkle). Assemble using Kids Choice Glue and Tweezers and adhere to card using Foam Tape.

Step 4 – Stamp Winter Sentiments (Joy) and Joyful Wishes (‘Tis The Season) using Versafine Onyx Black Ink using Unconventional Xmas Patterned Paper. Diecut the sentiments and adhere to card using 3mm Clear Double Sided Adhesive Tape.

The new winter release has arrived. Below is a link to all the products used. Once the winter release is in the shop I will update the Product Link. Thank you so much for stopping by and Happy Crafting!

Products Used:

Joset Designs

Snowman Shaker Globe Card

November 19, 2020

Hi everyone, it’s Tina here. I am super excited to share a Shaker Card using the new winter release from Joset Designs. I absolutely love the new additions. I used Jack Frost Dies and Snow Globe dies. Below you will find the steps to create your own Snowman Shaker Globe Card.

Step 1 – Trim White Soft Finish to 8 1/2” x 5 1/2”, score at 4 1/4” and fold in half for a vertical side fold card. (A2)

Step 2 – Trim Patterned Paper to 5 1/2” x 4 1/4” and adhere to card front using 3mm Clear Double Sided Adhesive Tape. (I used ModaScrap 6×6 Unconventional Xmas).

Step 3 – Diecut Snow Globe (frame) 2 times using Fun Foam and 1 time using Glitter Cardstock. Use the frame to trim out a window in acetate and a piece using Patterned Paper. Adhere the trimmed Patterned Paper using 3mm Clear Double Sided Adhesive Tape and the 2 layers of Fun Foam diecuts using Kid’s Choice Glue. Add Sequins or Sprinkles to the middle and secure it with the trimmed Acetate window using 3mm Clear Double Sided Adhesive Tape. Adhere the Glitter diecut to the top using Kids Choice Glue.

Step 4 – Diecut Jack Frost in various colors of Cardstock. Assemble and adhere to card using Kid’s Choice Glue.

Step 5 – Diecut Snow Globe (bottom base) using Blue Cardstock. Stamp Joyful Wishes Sentiment on the Snow Globe diecut using Versamark. Sprinkle White Embossing Powder and remove the excess. Heat set it with a Heat Tool and adhere to card using Foam Tape.

This was very quick and easy to put together and it almost feels like having the real deal. Below is a link to all the products used. Thank you for stopping by and Happy Crafting!

Products Used:

%d bloggers like this: