Browsing Tag

Panda Bear Dies

Cardmaking Elizabeth Craft Designs General Joset Designs Uncategorized

Sending You A Bear Hug Birthday Card

February 7, 2023

Hi everyone, it’s Tina here. Today I have a sweet Birthday wish card and a bonus card to share with you. Below are the steps to create your own cards.

Step 1 – Trim White Soft Finish to 4 1/4″ x 11″, score at 5 1/2″ and fold in half for a horizontal top fold card. (A2)

Step 2 – Diecut Bridge & Lotus (pond) using a scrap piece of cardstock to use as a stencil. Place the stencil created and place it on the card front. Use a Blender Brush to apply mid Blue Ink. (Optional – if you have the Planners Stencils 1 place the one that looks like waves and ink it with the remaining ink on the brush.)

Step 3 – Diecut Bridge & Lotus (bridge and lotus) in various colors of cardstock. Assemble and adhere to card using Kid’s Choice Glue.

Step 4 – Diecut Panda using Black and White Cardstock. Assemble using Kid’s Choice Glue and adhere to card using Foam Tape.

Step 5 – Diecut Party Time (Balloon) using coloured Cardstock of your choice. Adhere to card front using Foam Tape.

Step 6 – Stamp Life Is Better On The Farm & Bear Hugs Sentiment using Versafine Onyx Black Ink to the card front.

Step 1 – Trim White Soft Finish to 4 1/4″ x 11″, score at 5 1/2″ and fold in half for a horizontal top fold card. (A2)

Step 2 – Stamp English Countryside 1 using Versafine Onyx Black Ink to the card front in various areas. This will create a background.

Step 3 – Stamp English Countryside 1 using Versafine Onyx Black Ink using Watercolor Paper. Sprinkle Clear Embossing Powder, remove the excess, heat set it with a Heat Tool. Sprinkle various colours of Shimmer Powders. Spray water and let dry. If you do not Shimmer Powders you can use Watercolor Paints. Once it is dry diecut with the matching die. Adhere to card using Foam Tape.

Step 4 – Stamp Beautiful Blooms Forever (sentiment) using Versafine Onyx Black Ink. Diecut it with the matching die and adhere to card using Kid’s Choice Glue.

These cards can be used for many occasions by changing the sentiment. Below is a link to all the products used. Thank you for stopping by and Happy Crafting!

Products Used:

2 Comments
Cardmaking Joset Designs

Panda Bear with Googly Eyes

June 12, 2021

Karen here. I love googly eyes. Ok, that’s really random, but they are just the cutest! And googly eyes on the critters from Joset’s Designs are just too cute. Today, I used the adorable Panda Bear die and some googly eyes to create a card of appreciation for a boss who is moving onto his next role.

To create this card, I first cut an 8-1/2″x11″ piece of black cardstock in 1/2 and folded one part of it in half to create a card base. I then created the card front by cutting a slide from one of the papers in the Rainbow of Happiness paper collection. I turned one part over and cut the card front using the Stitched Rounded Rectangle dies.

I added some denim ribbon across the middle. Next I created the Panda Bear. I cut the pieces with black cardstock and with 90 lb White Soft Finish Cardstock. After I cut the pieces, I generally lay them out before I start to put them together like this:

How cute is that little guy??! To finish this card, I added a sentiment from the Bear Hugs Sentiment Set and a couple gems to highlight the sentiment. So easy and so fun! Thank you for stopping by today!

Craftily yours, Karen

Supplies from Elizabeth Craft Designs

Other Supplies

Black cardstock, black denim ribbon, googly eyes

Elizabeth Craft Designs General Joset Designs

You Are Pandastic Card

June 30, 2020

Hi everyone, it’s Tina here. Panda’s are one of my favourite animals and I used the Panda Bear die to create today’s card. I used it along with the Bridge & Lotus and Adventure Edges Dies with the Bear Hugs Stamp set. Below you will find the steps to create your own You Are Pandastic card.

Step 1 – Trim White Soft Finish Cardstock to 8 1/2” x 5 1/2”, score at 4 1/2” and fold in half for a vertical side fold card. (A2)

Step 2 – Trim Light Green Cardstock to 5 1/2” x 4 1/2” and adhere to card front using 3mm Clear Double Sided Adhesive.

Step 3 – Stamp Bear Hugs sentiment using Versafine Onyx Black Ink to the center bottom of the card.

Step 4 – Diecut Adventure Edges (Clouds) x 2using White Soft Finish Cardstock. Ink up the edges using any ink of your choice. I used Distress Oxide Tumbled Glass. Adhere to the card front the bottom layer using 3mm Clear Double Sided Adhesive and the top layer using Foam Tape.

Step 5 – Diecut Bridge & Lotus in various colours of Cardstock. Assemble then adhere to card using Foam Tape for the everything except the Lotus and Leaves use Kid’s Choice Glue. A trick.

Step 6 – Diecut Panda using White and Black Cardstock. Assemble then adhere to card using Foam Tape. A tip: Place the images on your card and once you are happy with the design use Press ‘N Seal to pick up the pieces. Add the adhesive to the backside and then place on top of your card. Doing this step will ensure that your images will remain in the same place.

This can be used for many occasions by changing the sentiment. Below is a link to all the products used. Thank you for stopping by and Happy Crafting!

Products Used:

Cardmaking Joset Designs

A Beary Happy New Year

January 2, 2020

Hey Friends!  It’s EK Gorman, and while it may be the second day of the New Year, I still want want to wish you a Beary Happy New Year with a few of my beary favorite critters!

EK Gorman, Elizabeth Craft Designs, Happy new year a

Step One: Die cut the Koala die set from some 90lb Soft Finish Cardstock, color and assemble it using Kids Choice Glue.  I used copic marks in Warm Gray to color the image.

Step Two:  Repeat step one, except use the Panda Bear die set.  I used copic markers in Cool Gray to color the Panda Bear.

Step Three:  Repeat step one again, except use the Honey Bear dies set.  I used copic markers in the E10-E19 range to color the bear.

Step Four:  Die cut several new year themed images from the Party Accessories die set using 90lb Soft Finish Cardstock.  Color in the images using alcohol markers.  I used copics in Neutral Gray N4, N6, and N8.  Add gold accents using acrylic paint.  I used Golden Fluids Iridescent Gold Deep.

IMG_E8302

Step Five:  Adhere the party accessories to the three bears.

IMG_E8304

Step Six:  Trim a piece of Cafe au Lait Soft Finish Cardstock to 12×6 inches, and score and fold the cardstock to create a 6×6 card frame.  Using Distress Oxide in Black Soot, distress the cardstock to create a moody background.

IMG_E8305

Step Seven:  Splatter the background of the card frame with the gold acrylic paint.  Paint more paint onto some 90lb White Soft Finish Cardstock, let dry, and die cut using the Adventure Edges die set.  Adhere to the card frame using some 6mm Clear Double Sided Adhesive.

EK Gorman, Elizabeth Craft Designs, Happy new year b

Step Eight:  Adhere the bears to the card frame using 6mm Clear Double Sided Adhesive.

Step Nine:  Die cut the sentiment from the gold painted cardstock.  I used the Words 5- Winter Wishes.  Adhere with Kids Choice Glue.

EK Gorman, Elizabeth Craft Designs, Happy new year c

I hope the New Year finds you hopeful and full of joy.  Let us know in the comments below your favorite way to create cards for the new years.

EK Gorman

%d bloggers like this: