Browsing Tag

#Papercrafts

Joset Designs Sidekick Essentials

Cookies Anyone!

November 10, 2023

Hi everyone, Katie here with todays blog inspiration! I wanted to share my “First Day” to my December Day-By-Day! using Warm Wishes and the 2023 December Day-By-Day! And since hot beverages are my favorite, I thought this was a good one to start off with. So grab a hot cup of coffee and lets begin!

Step 1: Cut your Mug, Gingerbread , Pine Boughs, Straws, Whip Cream, Marshmallows, White Piping trim and Candy Canes from your favorite card stock, ink the edges with Vintage Photo Distress Ink and assemble.

Step 2: Cut your base page from your favorite designer paper, ink your edges with distress ink, Stamp the top of your page with the “December” and “Day-By-Day” stamp that’s included in the kit, Next, add your Photo Mat and the White Piping trim down the side as per the photo. Add your Mug, Whipping Cream, Marshmallows and Straws.

Step 3: Tuck in the Gingerbread, Candy Canes and Pine Boughs behind the Photo Mat.

Step 4: Add your Boughs, Gingerbread and Candy Canes to the bottom of the mug.

Step 5: Attach your re-enforcements and your #1.

Step 6: Speckle with heavy white paint.

Thank you for joining me today, I hope it brought you some inspiration, check out my Facebook Page for other Day-By-Day pages. Have a wonderful day!

Joset Designs

A Bee’s Christmas Magic!

October 27, 2023

Hi everyone, Katie here with todays blog post. I wanted to share the Christmas Card that I created for a fun make-n-take at the 2023 Banff Creative Retreat. It’s the start of my Holiday Christmas Cards that I will be showing weekly on my Facebook page. So grab a hot beverage and I hope this brings you some inspiration.

Step 1: Start with cutting out your Bee with black and yellow cardstock, the honey pot is cut from yellow and red, the wings are cut from heavy vellum cardstock. I inked the bee body parts with Vintage Photo Distress Ink and assemble.

Step 2: Cut a Christmas Santa hat from Winter Accessories, ink and assemble. The Candy Cane is from the 2023 December Day by Day.

Step 3 : After your Christmas Bee has been assembled, I added some cheeks and used a white gel pen for the dot.

Step 4: Cut out a card base from white card stock 5 1/2 x 8 1/2 and score at 4 1/4 and fold in half, cut a piece of black card stock for a mat 5 1/4 x 4.”. Then add your designer paper of choice.

Step 5: I stamped a sentiment from Holiday Treats CS287 onto a 3×3 white square.

Step 6: Next, assemble your card. Pop-dot your Bee!

Step 7: Last step, I speckled my card with heavy white paint.

I hope you enjoyed my blog post today and you have a wonderful day!

Elizabeth Craft Designs Supplies:

Cardmaking Joset Designs Uncategorized

Ladybug Slim Line Card

August 24, 2023

Hi everyone, Katie here with todays blog post. When I received this set from Joset it automatically brought me back to some wonderful memories as a kid, picking daisy’s and collecting ladybugs. So today I wanted to create this super fun playful slim line card featuring Joset;s new collection “Bugs and Butterflies”. So grab a coffee and I will walk you through how I created this card.

Step 1: Cut your ladybugs from coordinating cardstock, the wings are cut from heavy vellum.

The flowers are cut from white and yellow card stock.

Ink all pieces before assembling with Vintage Photo Distress Ink, the cheeks are inked with Flamingo Distress Ink, I used a white gel pen for the dot in the cheeks. As per picture bellows.

Step 2: Choose your favorite slim line die, the one I used was from Photoplay. Next, I cut a piece of background paper and acetate to fit the card front and assemble. I like to use a bit of acetate as it creates a bit of a shimmer behind the card. then cut and fold your slimline card base.

Step 3: Next, attach your flowers and pop dot your ladybugs.

Step 4: Stamp your choice of sentiment from “Bugs and Kisses” and pop-dot to your card.

Step 5: Splatter your card with heavy acrylic paint.

Thank you for joining me with todays blog post, if you have any questions about my card please send me a message on Facebook Katie Porcina. Happy Crafting.

Joset Designs Sidekick Essentials Uncategorized

Bee-utiful August Sidekick Planner

August 10, 2023

Hi everyone, Happy Friday! Katie here with todays Bee-rific Sidekick Planner, using Joset’s new ” Bugs and Butterfly Collection”. I have been having so much fun with this collection creating cute summer themed pages for my sidekick! So, grab a coffee or your favorited beverage and lets begin!

Step1: You will want to start creating your bees, honey pot and flowers. I cut all the images from solid cardstock except the wings they were cut from heavy vellum cardstock. Then ink the edges with Vintage Photo Distress Ink, and assembled as per the photo above.

Step 2: Cut two base pages from Sidekick Essentials 20 with your choice of coordinating designer paper.

Next, I took Pocket Page Fillers 2 and cut out a photo mat and adhered it to my page. Once my photo matt was down I adhered my month (August). Then I pop-dotted my Bee and Flowers!

Step 3: On the second base page, create a pocket using Planner Essentials #26 then ink and attach your pocket. Next, I adhered my honey pot and pop-dotted my Bee and Flower. I stamped out the word Bee-utiful and matted onto black cardstock and adhered it to the top of my base page. I created a few tags and added them to my pocket.

Last you will want to add your reinforcement rings to both pages.

Step 4: Last step, I always like to add a little splatter with heavy white acrylic paint.

If you have any questions in regards to these sidekick planner pages please send me a message via Facebook to Katie Porcina.

Have a wonderful day and happy creating!

Cardmaking Joset Designs Planner Essentials Soft Finish Cardstock

Love this

July 19, 2023

Hi everyone,

I’m here for you today with a new blogpost. Today it is a sweet card with an ice cream. I will lead you step by step through this card.

I started with two tags from the Nested Tags dies. At the top I made a scoreline and adhere that small part together. You can see that line at the top. But you can still open it.

As base I used a piece of designpaper (Bellrose Pink) from 22 X 14 cm. I also cut a piece kraft cardstock from 22,5 x 14,5 cm. I also cut a piece designpaper from 5 x 16 cm and made a scoreline at 0,9 and 15,1 cm.

Now we adhere the 2 parts designpaper together. But you only adhere the small 0,9 cm and the back. So this piece is open to put things behind.

I cut out a piece of the designpaper and adhere this at the background. As you can see I also adhere the designpaper at the kraft.

I made a small cluster to add on the pink strip. All these elements are from the same paperpad.

Now it’s time to decorate the tags I made in the beginning. I cut a tag and numberstrip from the paperpad. I did some stamping at tickets and tabs and made a girl (the witch dies) with an ice cream. I used the donut from the Foodtruck Accessoires as reinforcer.

Adhere this at the front of the tag.

For the inside I cut out again a piece of the paperpad but also did some stamping with the good food good mood stamp. I made an bigger ice cream and ticket.

I also did some stamping and coloured 2 of them with a glitter pen.

Now I can slide one part of the tag under the stripe and one part above. You can unfold a part or you can take it all out.

Well I hope you enjoyed this project. I did when I was making. Thankyou for visiting and see you soon!

Kind regards

Lisanne Geerdink

Elizabeth Craft Design Supplies:

Other used supplies:

  • Distress Ink: Brushed Corduroy, Black Soot, Tattered Rose and Frayed Burlap
  • Versafine Clair Ink: Fallen Leaves and Nocturne
  • Gelly Roll glitter pen
Planner Essentials Uncategorized

Sunflower’s are natures smile- Planner Pages

July 7, 2023

Hi everyone, Katie here with todays blog post! I seem to be on a Bee theme right now so I might as well keep it going! This time, I am bringing you a Sunflower Planner Page perfect for some of your garden pictures. So grab a coffee and I will walk you through how I created these pictures.

Step 1: You will want to cut out your right and left base page using Planner Essentials #39-Torn Paper. I used the G45 “Let it Bee” Paper. Next, I cut two rectangular mats, cut yours to fit your picture leaving a bit of an edge.

Step 2: Using the Washi Tape Reminiscence Tape #1 I ripped strips and placed it down on my page like above. I used the Washi tape on both pages.

Step 3: Cut some Honeycomb from the Art Journal collection die Honeycomb Dots #1849 and rip it up so its into pieces.

Step 4: I added some fussy cut sunflowers, flowers and leaves from the collection, and my Garden Word from the Seed packet collection. (I used a lot of foam dots, see picture below)

Step 5: On the second page you will want to continue adding a photo mat, washi tape, G45 card, fussy cut sunflowers and Honeycomb. You will notice on both pages some black string like fiber, its colored sisal.. I like to add a little texture on my pages to keep it natural.

Step 6: Ink some of your edges and add your reinforcement rings.

Step 7: My last step is to always speckly with heavy body white paint.

I hope today brought you some inspiration to add your pictures from your garden into your planners.

Have a wonderful day >Katie<

Everyday Essentials Planner Essentials Planner Pocket Pages Summer Journal Special Uncategorized

By the Sea is where I want to be!

May 24, 2023

Hi everyone, Katie here with todays blog post. I wanted to change it up a bit using Esther Glasses Sea Creatures and create this super cool Steam Punk Easel Card. So grab your favorite beverage and lets begin.

Step 1: Start with creating the portal of your submarine, I used an older paper line from Stamperia, it has pipes and gears that would make it look like the inside of a sub. I cut the paper 4 1/4 x 5 1/2 and used the circle from the pocket page fillers 2 and cut the Centre of the paper. The backside of this paper has the pipes and gears and I flipped the circle. Before adhering the circle, I placed a piece of acetate in-between the layers. Next, I took the two circle from the Pocket Pages filler 2 and created the black ring from card stock. I added the black bolts from Planner Essentials 48 to the 4 corners of the card.

Step 2: Cut out your Octopus and diving helmet from Seas Creatures out of your favorited designer paper or card stock, as well as the coordinating grasses and Sea Horse (I did use the Summer Art Journal collection but just realized it was discontinued, Sorry) But there are other sea horses out there. Ink your pieces with Vintage Photo Distress Ink and assemble.

Step 3: Create the rest of your easel card by use heavy white cardstock120lbs and cut your card base, 5 1/2 x 11 and score along the 11″ side at 5 1/2 and 2 3/4 and fold up your score lines, cut an extra 4 1/4 x 5 1/2 base page and attach your card front. If you take a look at my other blog post “A Pop-Up Shaker Snowman Card” you can see how to assemble. (Its very easy)

Step 4: Cut out your Happy Birthday from coordinating cardstock and Sea Accessories, and adhere to your card.

Last step I always like to speckle with Heavy White Acrylic paint.

I hope todays blog post brought you some inspiration, as its just another way to use this awesome Sea Creatures Planner die set from Esther Glass! Have a wonderful day and happy crafting!

Joset Designs Planner Essentials

Life is better on the farm – By Katie Porcina

May 11, 2023

Good day everyone, Thank you for joining me with todays blog post. I wanted to share with you this super cute 3 page planner that I created for a special friend. So grab a coffee and lets walk through how I created these super fun pages.

Step 1: Cut 2 base pages from kraft card stock. Next take a 8 1/2 x 11 card stock and cut it to 8 1/4 x 8 1/2 along the 8 1/2 side score at 2 3/4 and 5 1/2 (see picture above)

Step 2: Attach your folded paper to your base page.

Step 3: Cut and adhere your designer papers of your choice.

Step 4: Next cut your folded base for your tractor and chicken. Take your cardstock and cut a strip 1 1/2 x 9 1/2 and score @ 4 1/4 and 7″ fold and attach your pattern paper. Next adhere to your page to create the Z FOLD. (As per picture below)

Step 5: Cut your Tractor, Chickens x 2 (1 white & 1 brown chicken) Pig, mud puddle, carrots, corn, hay, grass, eggs, hedge, sunflowers and sky from your favorite card stock, ink your edges with Vintage Photo Distress Ink and assemble.

Step 6 : Cut your barn, cow , grass and sunflower from card stock, ink and assemble. Assemble your barn as per picture above.

Step 7: Add your designer paper to your second base page. Next, cut out corn and sheep from your favorite card stock, ink and assemble.

Step 8: On this page you will create a waterfall for your pictures. From kraft cardstock cut 8 pieces 3 1/4 x 3 3/4 and score 1/2 along each top of your pieces. Add your choice of designer paper and assemble your waterfall flaps. last I added my sheep and the corn.

Step 9: Attach your cut flower reinforcements to your pages and your done!

I hope todays blog post brought you some inspiration, until next time have a wonderful creative day!

Katie

Elizabeth Craft Designs Supplies:

Joset Designs Planner Essentials

Halloween Mixed Media – Monster Mash!

July 20, 2022

Hi everyone, I wanted to get a jump start on my Halloween/Fall projects so I made this super fun but messy Monster Mixed Media Planner Pages. So Lets get started.

Step 1: You will need Tim Holtz Distress Sprays, I used Black Soot, Straw and Carved Pumpkin, but any combination will do. You will also need Rangers Heavy Watercolor Paper, Moon Mask, Planner Essentials 2, Water Spritzy Bottle and Heating tool.

Step 2: Cut your two planner pages using Planner Essentials 2 from the Ranger Heavy Watercolor Cardstock. next place you Lrg Moon Mask on the top part of your left hand page.

Step 3: Spray your Straw, Carved Pumpkin and Black Soot as per the picture above, once you have finished. Carefully lift your moon mask.

Step 4: Once you moon mask has been lifted, heat set with your heating tool.

Step 5: Once your page is dry I lightly spritzed the center of my moon so the distress spray activates. I then spritzed the side spray on my mixed media mat and dabbed the center of my moon. For my right hand side page I spritzed with the straw, Carved Pumpkin and Black Soot and dried it with my heating tool. (As per picture above)

Step 6: I cut out my Halloween Monsters from coordinating cardstock and inked the edges with Vintage Photo Distress ink or your choice of ink colors.

Step 7: Out of Planner Essentials Halloween Set 2, cut out your Haunted House, word and Number 31 from your choice of cardstock.

Step 8: Out of Planner Essentials 3 and heavy Black Card Stock cut out your Spider Web Frame and attach to your right hand side planner page.

Step 9: Once your Monsters are assembled, I attached my Haunted House down first, then my Monster Witch and Blue Pirate Monster the Cooking Pot was pop dotted on top of both monsters and the bat is attached with a small pop-dot to the top of the moon. (As per picture above)

Step 10: I matted the Halloween word onto Black and Lime Green Cardstock and attached to the top of my page. Next I attached my Monster Spider to the Web. I did not glue down the web as it leaves room to slide in a photo in the background.

Step 11: Add your reinforcement rings to both pages,

Step 12: And the best part is saved for last, I speckled both pages using a fan brush and heavy mixed media white paint.

I hope todays blog post brought you some inspiration and a little bit of Halloween Fun!

Thank you and Happy Crafting >Katie<

Joset Designs

Monster pop-up tags!

July 13, 2022

Hello crafty friends, I am bringing in the Monsters both Christmas and Birthday for todays blog post!! These cute tags come with a bit of a twist as the Birthday Tag is a small Garbage Can pop-up card. I hope you enjoy todays post and lets get stared!

Step 1: Out of dark grey card stock cut 4 x 11 & score in half, cut your card by laying the garbage can die just above the fold line, then run it through your machine. Next out of light grey cardstock cut out your garbage can and lid, I also created a handle by re-cutting the lid from black cardstock then I trimmed the handle and adhered it the the light grey handle.

Step 2: Line the pop-up die along the score line of your garbage can card and run it through your machine to create the pop-out. See picture below.

Step 3: out of Josets cute Monster sets cut both creatures from red, orange and other coordinating cardstock. I inked all my edges with Vintage Photo Distress Ink and assembled. Next I cut out the balloon, stars, cake, birthday hat and party pieces ink and assembled.

Step 4: Create your card front by attaching all your creatures as per picture above using your favorite adhesive.

I added some glossy accents to the stars and the top of his Birthday hat.

Step 5: I added my cake, party favors and quote from the Monster Hugs stamp set to the inside of my pop-up tag. Last step is Speckling with a heavy body white paint and a fan brush*Optional*

To get a jump start on your Holiday creating, I just wanted to share with you another creative way to make your Holiday Tags or Garbage Can pop-up tag using different Christmas sets designed by Joset.

I hope you enjoyed todays blog post and brought a bit of creative inspiration to your day!! Take Care and happy crafting! >Katie<

%d bloggers like this: