Browsing Tag

Planner Essentials 21 – Note Pieces

Elizabeth Craft Designs General Joset Designs Planner Essentials Soft Finish Cardstock Uncategorized

Enjoy This Moment Planner Page

May 21, 2020

Hey Crafters! Katelyn here, sharing with you my Enjoy This Moment Planner Page.

To create my planner page, I’ve used a variety of the dies from the Planner Essentials Collection as well as dies from Joset Designs. You’ll want to read below as I share with you how to recreate my page at home.

Step One. Die cut the ticket page from the Planner Essentials – 11 die out of White Soft Finish Cardstock. Spritz Dylusions Ink Spray in Rose Quartz, Pink Flamingo and Tangerine Dream on the page as desired. Spritz the ink with water and dab the excess ink spray off with a paper towel. Once the page has dried, ink the edges of the page using Black Soot Distress Ink and a blending tool with foam.

Step Two. Choose a piece of patterned paper. Die cut the large banner from the Planner Essentials – 3 die out of the paper. Ink the edges of the banner using Black Soot Distress Ink and a blending tool with foam.

Step Three. From the Diagonal Stitched Fishtails, die cut the 3/4″ fishtail out of a piece of kraft cardstock. Cut the banner down to 2 3/4″. Ink the edges of the fishtail using Black Soot Distress Ink and a blending tool with foam.

Step Four. From the Planner Essentials 14 – Bookmark 1 die, die cut the star reinforcements out of White Soft Finish Cardstock. You’ll need a total of four. Ink the edges of the reinforcements using Black Soot Distress Ink and a blending tool with foam.

Step Five. Die cut two circle wreaths from the Planner Pocket – 2 out of White Soft Finish Cardstock.

Step Six. Die cut the small note piece from the Planner Essentials 21 – Note Pieces die out of the same piece of patterned paper you die cut the banner out of. Die cut the 1 1/2″ note piece out of another piece of patterned paper. Ink the edges of the note pieces using Black Soot Distress Ink and a blending tool with foam.

Step Seven. Choose two labels from the Planner Labels die. Die cut one label out of black cardstock. Die cut the other label from kraft cardstock. Cut one of the labels in half. Ink the edges of the kraft label using Black Soot Distress Ink and a blending tool with foam.

Step Eight. Choose two of the patterns from the Planner Patterns die. Die cut one of the patterns out of black cardstock. Die cut the other pattern out of kraft cardstock.

Step Nine. From the Planner Filmstrip die, die cut the polaroid die with the tab out of a coordinating piece of patterned paper. Ink the edges of all of the pieces using Black Soot Distress Ink and a blending tool with foam.

Step Ten. From the Planner Essentials – 8 die, die cut the Enjoy This Moment words out of kraft cardstock. Die cut the heart out of White Soft Finish Cardstock. Die cut the heart a second time out using the patterned paper you die cut the banner out of. Ink the edges of both hearts using Black Soot Distress Ink and a blending tool with foam.

Step Eleven. Cut a piece of burlap that measures 1 1/2″ x 4″.

Step Twelve. Adhere the star reinforcements over top of the circles on the page. Adhere the kraft pattern piece 1″ from the top and 1 3/4″ from the right of the page.

Step Thirteen. Adhere one of the label halves 5/8″ from the top and 7/8″ from the right of the page. Adhere the small note piece 5/8″ from the right and 1 1/2″ from the bottom of the page. Adhere the burlap piece 7/8″ from the top and 1 1/4″ from the right of the page.

Step Fourteen. Use foam squares to adhere the kraft label 3/4″ from the right and 1 5/8″ from the top of the page. Adhere the 1 1/2″ note piece 3/4″ from the bottom and 1/4″ from the left of the page. Adhere the other half of the label 3/8″ from the bottom and 1/2″ from the left of the page. Adhere the other pattern piece 1″ from the top and 3/8″ from the left of the page.

Step Fifteen. Adhere the banner 1/8″ from the right and 2 1/4″ from the top fo the page. Adhere the two circle wreath as desired over top of one another to the middle of the pattern, note piece and part of the banner.

Step Sixteen. Staple the polaroid pieces together. Adhere the 3/4″ fishtail 1/8″ from the left side of the polaroid frame. Foam square the frame 1 1/4″ from the bottom and 1″ from the right of the page.

Step Seventeen. Adhere the hearts together, making sure the white part of the heart shows underneath the patterned paper heart. Adhere the heart overtop of the fishtail. Adhere the Enjoy This Moment words 1/4″ from the bottom of the polaroid frame. To finish the page, add a staple to the black label halves at the top and bottom of the page.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Enjoy This Moment Planner Page.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Black Soot
  • Dylusions Ink Spray: Rose Quartz, Pink Flamingo, Tangerine Dream
  • Blending Tool with Foam
  • Emerald Creek Craft Supplies: Pam Bray Digital Paper – Pink Crinkle Abstract Paper
  • Alexandre Renke: Patterned Paper
  • Misc: Black Cardstock, Kraft Cardstock, Burlap and Mini Stapler
Art Journal Collection Elizabeth Craft Designs General Planner Essentials Soft Finish Cardstock

Inspire Gift Tag

May 5, 2020

Hey Crafters! Katelyn here, sharing with you my Inspire Gift Tag.

To create my tag, I’ve used a variety of the dies, stamp and stencil from Charlene and Ilse’s Art Journal Specials Collection as well as a couple of dies from the Planner Essentials Collection. You’ll want to read below as I share with you how to recreate my tag at home.

Step One. Die cut the small tag from the Planner Essentials – 2 die out of White Soft Finish Cardstock. Place the stripe portion of the Make Your Mark stencil on the middle of the tag. Using a palette knife, put Texture Paste Opaque Matte through the stencil. Remove the stencil. Once the paste has dried, ink the edges of the tag using Black Soot Distress Ink and a blending tool with foam.

Step Two. Next, you’ll need two coordinating patterned papers. Die cut the small note piece from the Planner Essentials 21 – Note Pieces die out of one of the patterned papers. Die cut the stitched rectangle from the same die out of the second piece of patterned paper. Ink the edges of both pieces, using Black Soot Distress Ink and a blending tool with foam.

Step Three. From the Planner Essentials 21 – Note Pieces die, die cut the curly arrow out of kraft cardstock.

Step Four. From the Blooming Branches die, die cut one branch out of book page and die cut the other branch out of black cardstock.

Step Five. Die cut the stitched label from the Planner Essentials 26 – Planner Pocket 3 – Tags & Toppers out of a third coordinating pattern paper piece. From the same die, die cut the inspire word out of kraft cardstock. Ink the edges of the label using Black Soot Distress Ink and a blending tool with foam.

Step Six. From the Planner Essentials – 8 die, die cut one of the reinforcements out of black cardstock. Cut the reinforcement so that it fits over the circle on the tag and the top ends at the top of the tag.

Step Seven. Apply Jet Black Archival Ink to the leaves stamp from the First Sights of Spring stamp set and stamp onto a piece of watercolour paper. Colour the leaves in using a waterbrush and the Watercolor Palette. Once the image has dried, fussy cut the image out. Ink the edges of the image using Black Soot Distress Ink and a blending tool with foam.

Step Eight. Cut a piece of burlap that measures 1 3/4″ x 3″.

Step Nine. Adhere the reinforcement circle to the tag. Adhere the burlap 1/4″ from the left and 1/4″ from the bottom of the tag.

Step Ten. Adhere the stitched rectangle 3/8″ from the left side and 1/4″ from the bottom of the note piece. Foam square the note piece 3/8″ from the left and 3/8″ from the bottom of the tag. Adhere the arrow to the left hand side of the stitched rectangle.

Step Eleven. Adhere the label 3/4″ from the left and 1/8″ from the bottom of the note piece. Adhere the heart branch to the middle of the label. Adhere the other branch 1/2″ from the left and 1/8″ from the bottom of the note piece.

Step Twelve. Foam square the leaves image to the middle of the branches. Adhere the inspire word to the right hand side of the stitched rectangle and note piece.

Step Thirteen. To finish the tag, tie a piece of twine through the whole the top of the tag.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Inspire Gift Tag.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Black Soot
  • Blending Tool with Foam
  • Ranger Ink: Jet Black Archival Ink and Texture Paste Opaque Matte
  • Graphic 45: Bloom Collection
  • Misc: Black Cardstock, Kraft Cardstock, Book Page, Twine and Burlap
Elizabeth Craft Designs General Joset Designs Planner Essentials Soft Finish Cardstock

You Will Never Know the Value Planner Page

April 28, 2020

Hey Crafters! Katelyn here, sharing with you my You Will Never Know the Value Planner Page.

To create my planner page, I’ve used a variety of the dies from the Planner Essentials Collection as well as dies from Joset Designs. You’ll want to read below as I share with you how to recreate my page at home.

Step One. Die cut the page from the Planner Essentials 27 – Retro Number Trio out of White Soft Finish Cardstock. Cut the page down to 7 1/4″ tall. Spray Distress Spray Stain in Mermaid Lagoon, Abandoned Coral and Cracked Pistachio as desired on the page. Dry the page with a heat tool.

Step Two. From the Patterns 2 Stamp set, you’ll need the bubbles stamp. Apply Jet Black Archival Ink to the stamp and stamp randomly on the page as desired seven times. Reapply ink to the stamp as needed. Ink the edges of the page using Black Soot Distress Ink and a blending tool with foam.

Step Three. Die cut a 1 7/8″ Diagonal Stitched Fishtail out of White Soft Finish Cardstock. Die cut another 1 7/8″ Diagonal Stitched Fishtail out of Misty Mauve Soft Finish Cardstock. Die cut a 3/4″ Diagonal Stitched Fishtail out of a piece of patterned paper. Tear a bit off the top of both 1 7/8″ fishtails. Distress the edges of all three fishtails. Ink the edges of the fishtails using Black Soot Distress Ink and a blending tool with foam.

Step Four. Die cut the 2 3/4″ and 1 1/2″ Note pieces out of book page from the Planner Essentials 21 – Note Pieces die. Distress the edges of the note pieces. Ink the edges of the note pieces using Black Soot Distress Ink and a blending tool with foam.

Step Five. Choose one of the small tag toppers from the Planner Essentials 26 – Planner Pocket 3 – Tag & Toppers out of White Soft Finish Cardstock. Distress the edges of the tag topper. Ink the edges of the tag topper using Black Soot Distress Ink and a blending tool with foam.

Step Six. Choose one of the labels from the Planner Labels. Die cut the label out of patterned paper. Distress the edges of the label. Ink the edges of the label using Black Soot Distress Ink and a blending tool with foam.

Step Seven. From the Planner Essentials – 2 die, die cut the small tag out of patterned paper. Distress the edges of the tag. Ink the edges of the tag using Black Soot Distress Ink and a blending tool with foam.

Step Eight. Die cut the tag from the Planner Essentials -4 die out of patterned paper. Distress the edges of the tag. Ink the edges of the tag using Black Soot Distress Ink and a blending tool with foam.

Step Nine. Die cut the diamond pattern from the Planner Patterns die out of black cardstock.

Step Ten. From the Planner Essentials 24 – Photo Frame Page die, die cut the film strip out of black cardstock.

Step Eleven. Die cut the heart from the Planner Essentials – 8 die out of White Soft Finish Cardstock. Distress the edges of the heart. Ink the edges of the heart using Black Soot Distress Ink and a blending tool with foam.

Step Twelve. From the Planner Essentials 20 – Half Heart Page Set die, die cut the plain lightbulb out of White Soft Finish Cardstock. Die cut the heart lightbulb out of Misty Mauve Soft Finish Cardstock. Distress the edges of the lightbulbs and heart. Ink the edges of the lightbulbs and heart using Black Soot Distress Ink and a blending tool with foam.

Step Thirteen. Choose on of the reinforcements from the Reinforcement Variety Pack. Die cut the reinforcement out of White Soft Finish Cardstock. You’ll need a total of six. Ink the edges of the reinforcements using Black Soot Distress Ink and a blending tool with foam.

Step Fourteen. From the Important Memo Stamp Set, you’ll need the You Will Never Know The Value quote. Apply Jet Black Archival Ink to the quote and stamp onto a piece of White Soft Finish Cardstock. Cut the quote into eleven strips. Ink the edges of the strips using Black Soot Distress Ink and a blending tool with foam.

Step Fifteen. Adhere the reinforcement pieces over top of the circles on the page.

Step Sixteen. Foam square the white 1 7/8″ fishtail 1 1/4″ from the right and 3/4″ from the top of the page. Adhere the other fishtail 1 5/8″ from the left and 1″ from the top of the page. Adhere the 2 3/4″ note piece 1 1/8″ from the left and 1 1/2″ from the top of the page.

Step Seventeen. Adhere the diamond pattern piece to the middle of the note piece. Adhere the 3/4″ fishtail 2 1/4″ from the left and 1 1/4″ from the top of the page. Adhere the tag topper 7/8″ from the right and 2″ from the top of the page.

Step Eighteen. Foam square the large tag 1 1/8″ from the right and 1 3/4″ from the top of the page. Adhere the small tag to the bottom of the large tag. Make sure the hole of the tag sits at the bottom of the large tag.

Step Nineteen. Staple the filmstrip 1/4″ from the left of the 1 1/2″ note piece at the top and bottom. Adhere the 1 1/2″ note piece 1 1/4″ from the left and 1 5/8″ from the bottom of the page. Adhere the white heart 1/2″ underneath of the left hand side of the label. Adhere the label 1 1/2″ from the right and 2 1/4″ from the top of the page.

Step Twenty. Adhere the heart lightbulb to the plain lightbulb. Staple the heart to the bottom right side of the heart lightbulb. Foam square the lightbulb 1 1/2″ from the right and 2 1/2″ from the top of the page.

Step Twenty One. Adhere the You Will Never Know quote to the right hand side of the lightbulb and heart as desired. To finish the page, add a staple in the bottom right of the large tag and top left of the large tag.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my You Will Never Know the Value Planner Page.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Black Soot
  • Distress Spray Stain: Abandoned Coral, Cracked Pistachio and Mermaid Lagoon
  • Blending Tool with Foam
  • Ranger Ink: Jet Black Archival Ink
  • Prima Marketing: Patterned Paper
  • Misc: Black Cardstock, Kraft Cardstock, Book Page and Mini Stapler
Elizabeth Craft Designs General Joset Designs Planner Essentials Soft Finish Cardstock

Inspire Tag

March 24, 2020

Hey Crafters! Katelyn here, sharing with you my Inspire Tag.

To create my Inspire Tag, I’ve used a variety of the new dies from Charlene and Ilse’s Art Journal Specials Collection as well as a couple of dies from the Planner Essentials Collection and Joset Designs. You’ll want to read below as I share with you how to recreate my tag at home.

Step One. Die cut the large tag from the Planner Essentials 26 – Planner Pocket 3 – Tag & Toppers die out of Kraft Cardstock. Place the S033 stencil on the right hand side of the tag and put Texture Paste Opaque Matte through the stencil with a palette knife. Once the texture paste has dried, distress the edges of the tag. Ink the edges of the tag using Black Soot Distress Ink and a blending tool with foam.

Step Two. Die cut the 2″ note piece from the Planner Essentials 21 – Note Pieces die out of book page. Distress the edges of the note piece. Ink the edges of the note piece using Black Soot Distress Ink and a blending tool with foam.

Step Three. Die cut a 1″ Diagonal Stitched Fishtail out of White Soft Finish Cardstock and out of book page. Tear the top of the white fishtail so that it ends up being 4″ long. Tear the top of the book page fishtail so that it ends up being 3 3/4″ long. Distress the edges of the fishtails. Ink the edges of the fishtails using Black Soot Distress Ink and a blending tool with foam.

Step Four. Choose one of the reinforcements from the Reinforcement Variety Pack Die. Die cut the reinforcement out of black cardstock.

Step Five. Die cut 1760 die out of black cardstock. Cut the die cut piece in half.

Step Six. Die cut 1759 die out of black cardstock. Cut the circles to fit the tag as desired.

Step Seven. Apply Jet Black Archival Ink to the cotton image from the First Sights of Spring Stamp Set and stamp onto a piece of watercolour cardstock. Colour the cotton image in using Dina Wakley Scribble Sticks from Set 1 & 2 and a waterbrush. Once the image has dried, fussy cut it out. Ink the edges of the cotton using Black Soot Distress Ink and a blending tool with foam.

Step Eight. Use the letters from the Morning Letters Stamp Set and Jet Black Archival Ink to stamp “inspire” on a piece of White Soft Finish Cardstock. Fussy cut the word out. Ink the edges of the word using Black Soot Distress Ink and a blending tool with foam.

Step Nine. Cut a piece of burlap that measures 2″ x 3 1/4″. Cut a piece of cheesecloth as desired.

Step Ten. Adhere the reinforcement circle to the top of the tag on the circle. Adhere the white fishtail 1/4″ from the right and 1/2″ from the bottom of the tag. Adhere the book page fishtail 1 1/8″ from the left and 3/4″ from the bottom of the tag.

Step Eleven. Adhere the burlap piece 1 1/4″ from the bottom and to the right hand side of the tag. Adhere the mandella half to the 1″ from the top and to the right hand side of the tag.

Step Twelve. Foam square the note piece 1/2″ from the left and 1 1/4″ from the bottom of the tag. Adhere the cheesecloth as desired to the middle right side of the note piece. Adhere the circle piece overtop of the cheesecloth as desired.

Step Thirteen. Use foam squares to adhere the cotton image 5/8″ from the bottom and 3/8″ from the right of the tag. Adhere the inspire word to the bottom right side of the cotton image.

Step Fourteen. Tie a piece of twine through the hole at the top of the tag. Use a paint brush to splatter Tarnished Brass Distress Spray Stain on the tag as desired.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Inspire Tag.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Black Soot
  • Distress Spray Stain: Tarnished Brass
  • Blending Tool with Foam
  • Dina Wakley: Scribble Sticks 1&2
  • Ranger Ink: Jet Black Archival Ink and Texture Paste Opaque Matte
  • Misc: Black Cardstock, Kraft Cardstock, Book Page, Burlap, Cheesecloth and Twine
Elizabeth Craft Designs General Planner Essentials

March Week 1 Planner Spread

March 5, 2020

Hey Crafters! Katelyn here, sharing with you my March Week 1 Planner Spread.

To create my planner spread, I’ve used a variety of the new dies from the Planner Essentials Collection as well as one of the past stamp sets from the collection. You’ll want to read below as I share with you how to recreate my planner spread at home.

Step One. You’ll need to choose a paper collection. Choose a piece of patterned paper from the collection and die cut two pages out of it using the page from the Planner Essentials 27 – Retro Number Trio. Ink the edges of both pages using Walnut Stain Distress Ink and a blending tool with foam.

Step Two. Die cut the filmstrip die from the Planner Essentials 24 – Photo Frame Pages, four times out of black cardstock.

Step Three. From the Planner Essentials 21 – Note & Pieces die, you’ll need the arrow. Die cut the arrow once out of kraft cardstock. Die cut the arrow again out of a coordinating piece of patterned paper. Ink the edges of the arrows using Walnut Stain Distress Ink and a blending tool with foam.

Step Four. Choose one of the banner styles from the Planner Essentials 27 – Retro Number Trio. Choose a couple of patterned papers that coordinate with your page. Die cut the medium banner out of one of the patterned paper. Die cut the small banner twice out of the other patterned paper. Ink the edges of all three banners using Walnut Stain Distress Ink and a blending tool with foam.

Step Five. You’ll need the medium sized note piece and the curved stitched rectangle from the Planner Essentials 21 – Note Pieces Die. Die cut the note piece four times out of a piece of the patterned paper you’ve already used. Die cut the note piece out of kraft cardstock. Die cut the curved stitched rectangle twice out of kraft cardstock. Apply Jet Black Archival Ink to each day of the week stamps from the Calendar stamp set and stamp each day onto one of the note pieces or rectangle. Use a black gel pen to write on them. Ink the edges of the note pieces and rectangles using Walnut Stain Distress Ink and a blending tool with foam.

Step Six. Choose one of the reinforcement strips from the Reinforcement Variety Pack. Die cut the reinforcement strip twice out of kraft cardstock. You’ll need a total of twelve reinforcements. Ink the edges of the reinforcements using Walnut Stain Distress Ink and a blending tool with foam.

Step Seven. From the patterned papers, choose twelve images to fussy cut out. Ink the edges of the images using Walnut Stain Distress Ink and a blending tool with foam.

Step Eight. We will start assembling the left hand page. Adhere six of the reinforcements over top of the holes on the page. Adhere one of the film strips 1″ from the right and 3/4″ from the bottom of the page. Adhere the other film strip 1″ from the left and 1/8″ from the top of the page.

Step Nine. Adhere one of the fussy cut images 1 1/8″ from the right and 2 1/2″ from the top of the page. To the Monday piece, adhere one of the fussy cut images to the left hand side of it. Foam square the Monday to Wednesday pieces as desired on the page.

Step Ten. Use adhesive and foam squares to adhere three more images as desired.

Step Eleven. To finish your page, use adhesive and foam square to adhere two more fussy cut images and a small banner as desired on the page. Adhere the patterned paper arrow on the right hand side of the Tuesday note, making sure the arrow points down to Wednesday.

Step Twelve. Now we’ll assemble the right hand page. Adhere six of the reinforcements over top of the holes on the page. Adhere one of the film strips 1 1/4″ from the left and 1/2″ from the bottom of the page. Adhere the other film strip 7/8″ from the right and 1/4″ from the top of the page.

Step Thirteen. To the Sunday piece, adhere one of the fussy cut images to the left hand side of it. Foam square the Thursday to Sunday pieces as desired on the page.

Step Fourteen. Use adhesive and foam squares to adhere the remaining images to the page as desired. Foam square the two banners to the top left side of the page. Adhere the kraft arrow to the bottom right side of the Sunday note, making sure the arrow faces up.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my March Week 1 Planner Spread.

Katelyn

Other Supplies Used:

  • Distress Ink: Walnut Stain
  • Blending Tool with Foam
  • Ranger Ink: Jet Black Archival Ink
  • Alexandre Renke: Patterned Paper/Images
  • Misc: Black Cardstock, Kraft Cardstock and Black Journaling Pen
%d bloggers like this: