Browsing Tag

Planner Pocket 2

Elizabeth Craft Designs General Joset Designs Planner Essentials Soft Finish Cardstock Uncategorized

Enjoy This Moment Planner Page

May 21, 2020

Hey Crafters! Katelyn here, sharing with you my Enjoy This Moment Planner Page.

To create my planner page, I’ve used a variety of the dies from the Planner Essentials Collection as well as dies from Joset Designs. You’ll want to read below as I share with you how to recreate my page at home.

Step One. Die cut the ticket page from the Planner Essentials – 11 die out of White Soft Finish Cardstock. Spritz Dylusions Ink Spray in Rose Quartz, Pink Flamingo and Tangerine Dream on the page as desired. Spritz the ink with water and dab the excess ink spray off with a paper towel. Once the page has dried, ink the edges of the page using Black Soot Distress Ink and a blending tool with foam.

Step Two. Choose a piece of patterned paper. Die cut the large banner from the Planner Essentials – 3 die out of the paper. Ink the edges of the banner using Black Soot Distress Ink and a blending tool with foam.

Step Three. From the Diagonal Stitched Fishtails, die cut the 3/4″ fishtail out of a piece of kraft cardstock. Cut the banner down to 2 3/4″. Ink the edges of the fishtail using Black Soot Distress Ink and a blending tool with foam.

Step Four. From the Planner Essentials 14 – Bookmark 1 die, die cut the star reinforcements out of White Soft Finish Cardstock. You’ll need a total of four. Ink the edges of the reinforcements using Black Soot Distress Ink and a blending tool with foam.

Step Five. Die cut two circle wreaths from the Planner Pocket – 2 out of White Soft Finish Cardstock.

Step Six. Die cut the small note piece from the Planner Essentials 21 – Note Pieces die out of the same piece of patterned paper you die cut the banner out of. Die cut the 1 1/2″ note piece out of another piece of patterned paper. Ink the edges of the note pieces using Black Soot Distress Ink and a blending tool with foam.

Step Seven. Choose two labels from the Planner Labels die. Die cut one label out of black cardstock. Die cut the other label from kraft cardstock. Cut one of the labels in half. Ink the edges of the kraft label using Black Soot Distress Ink and a blending tool with foam.

Step Eight. Choose two of the patterns from the Planner Patterns die. Die cut one of the patterns out of black cardstock. Die cut the other pattern out of kraft cardstock.

Step Nine. From the Planner Filmstrip die, die cut the polaroid die with the tab out of a coordinating piece of patterned paper. Ink the edges of all of the pieces using Black Soot Distress Ink and a blending tool with foam.

Step Ten. From the Planner Essentials – 8 die, die cut the Enjoy This Moment words out of kraft cardstock. Die cut the heart out of White Soft Finish Cardstock. Die cut the heart a second time out using the patterned paper you die cut the banner out of. Ink the edges of both hearts using Black Soot Distress Ink and a blending tool with foam.

Step Eleven. Cut a piece of burlap that measures 1 1/2″ x 4″.

Step Twelve. Adhere the star reinforcements over top of the circles on the page. Adhere the kraft pattern piece 1″ from the top and 1 3/4″ from the right of the page.

Step Thirteen. Adhere one of the label halves 5/8″ from the top and 7/8″ from the right of the page. Adhere the small note piece 5/8″ from the right and 1 1/2″ from the bottom of the page. Adhere the burlap piece 7/8″ from the top and 1 1/4″ from the right of the page.

Step Fourteen. Use foam squares to adhere the kraft label 3/4″ from the right and 1 5/8″ from the top of the page. Adhere the 1 1/2″ note piece 3/4″ from the bottom and 1/4″ from the left of the page. Adhere the other half of the label 3/8″ from the bottom and 1/2″ from the left of the page. Adhere the other pattern piece 1″ from the top and 3/8″ from the left of the page.

Step Fifteen. Adhere the banner 1/8″ from the right and 2 1/4″ from the top fo the page. Adhere the two circle wreath as desired over top of one another to the middle of the pattern, note piece and part of the banner.

Step Sixteen. Staple the polaroid pieces together. Adhere the 3/4″ fishtail 1/8″ from the left side of the polaroid frame. Foam square the frame 1 1/4″ from the bottom and 1″ from the right of the page.

Step Seventeen. Adhere the hearts together, making sure the white part of the heart shows underneath the patterned paper heart. Adhere the heart overtop of the fishtail. Adhere the Enjoy This Moment words 1/4″ from the bottom of the polaroid frame. To finish the page, add a staple to the black label halves at the top and bottom of the page.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Enjoy This Moment Planner Page.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Black Soot
  • Dylusions Ink Spray: Rose Quartz, Pink Flamingo, Tangerine Dream
  • Blending Tool with Foam
  • Emerald Creek Craft Supplies: Pam Bray Digital Paper – Pink Crinkle Abstract Paper
  • Alexandre Renke: Patterned Paper
  • Misc: Black Cardstock, Kraft Cardstock, Burlap and Mini Stapler
Craft Drops Elizabeth Craft Designs General Joset Designs Planner Essentials Soft Finish Cardstock Stamping

Merry Christmas Gift Tag

October 21, 2019

Hey Crafters! Katelyn here, sharing with you my Merry Christmas Gift Tag.

To create my gift tag, I’ve used a variety of dies from the Planner Essentials collection and Joset Designs. I hope you enjoy my tutorial!

Step One. Die cut the large tag from the Planner Essentials – 2 die and die cut it out of White Soft Finish Cardstock. Apply Jet Black Archival Ink to the script stamp from the Background Stamps 2 and stamp randomly seven times on the tag. Reapply ink to the stamp as needed. Apply Jet Black Archival Ink to the fraction stamp from the Background Stamps 1 and stamp randomly seven times on the tag. Reapply ink to the stamp as needed. Ink the edges of the tag using Walnut Stain Distress Ink and a blending tool with foam.

Step Two. Die cut two wreaths from the Planner Pocket – 2 out of White Soft Finish Cardstock.

Step Three. From the Planner Essentials – 13 die, die cut the deer out of White Soft Finish Cardstock. Using a blending tool with foam, blend Vintage Photo Distress Ink over the entire surface of the deer.

Step Four. Choose a label from the Planner Labels die and then die cut it out of kraft cardstock. Apply Fired Brick Distress Ink to the Merry Christmas stamp from the Joyful Wishes stamp set and stamp onto the label. Ink the edges of the label using Vintage Photo Distress Ink and a blending tool with foam.

Step Five. Adhere one of the wreaths to the middle of the tag. Adhere the other wreath over top of the previous adhered wreath, making sure the circles don’t line up.

Step Six. Foam square the deer to the middle of the wreath.

Step Seven. Use adhesive and foam squares to adhere the Merry Christmas label to the right of the deer.

Step Eight. Tie a piece of twine to the top of the tag. To finish the label, use the Craft Drops – Metallic Silver to add two drops in the top left corner and three drops in the bottom right side of the label.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Christmas Gift Tag.

Katelyn

Elizabeth Craft Designs Supplies:

Other:

  • Distress Ink: Vintage Photo, Fired Brick and Walnut Stain
  • Blending Tool with Foam
  • Ranger Ink: Jet Black Archival Ink
  • Magenta Nuance: Red and Olive
  • Misc: Twine, Mister and Kraft Cardstock
Planner Essentials Scrapbooking Soft Finish Cardstock Videos

Creating A Double Pocket In Your Planner

October 13, 2019

A very happy Sunday to you, crafters!

Esther Glas, designer for the Elizabeth Craft Design Planner Essentials collection, shows us how to create a double pocket for your planner. Watch the video below!

Don’t forget to join the ECD Planner Group for more planner inspiration, and to share your projects!

Happy Crafting!

Elizabeth Craft Designs General ModaScrap Planner Essentials Soft Finish Cardstock

Step-By-Step: July Title Page

July 11, 2019

Hey Crafters! Katelyn here, sharing with you a title page for inside my planner to mark the start of July.

To create my title page, I’ve used a variety of dies from the Planner Essentials collection and ModaScrap. I hope you enjoy my tutorial!

Step one. From the Planner Essentials – 1 die set, die cut the page out of a piece of patterned paper. Ink the edges of the page using Black Soot Distress Ink and a blending tool with foam.

Step two. From the Planner Essentials – 5 die set, die cut a set of the reinforcements twice out of another piece of coordinating patterned paper. Ink the edges of the reinforcements circles using Black Soot Distress Ink and a blending tool with foam.

Step three. Die cut the page from the Planner Essentials – 2 die set out of a third piece of coordinating patterned paper. Ink the edges of the page using Black Soot Distress Ink and a blending tool with foam.

Step four. Die cut the 2 3/4″ Dashing Circle out of the backside of one of the coordinating patterned paper pieces. Ink the edges of the page using Black Soot Distress Ink and a blending tool with foam.

Step five. Die cut the large tag from the Planner Essentials – 5 die set out of White Soft Finish Cardstock. Ink the edges of the tag using Black Soot Distress Ink and a blending tool with foam.

Step six. From the Planner Elements die set, die cut three stitched hexagons from one of the patterned papers. Die cut four stitched hexagons from one of the other patterned papers. Ink the edges of the hexagons using Black Soot Distress Ink and a blending tool with foam.

Step seven. Die cut the circle wreath from the Planner Pocket – 2 die set twice out of the two patterned papers you used for the stitched hexagons.

Step eight. From the Planner Months die set, die cut the July word out of one of the patterned papers used for the circle wreaths. Die cut the July word a second time out of White Soft Finish Cardstock.

Step nine. Adhere six of the reinforcements to the left hand page. This completes your left hand page of the spread.

Step ten. Adhere the other six reinforcements to the right hand side page.

Step eleven. Adhere the stitched hexagons as desired on the tag. Trim off any hexagons that are hanging over the tag. Ink the edges of the hexagons if needed using Black Soot Distress Ink and a blending tool with foam. Foam square the tag to the middle of the right hand page.

Step twelve. Foam square the dashing circle to the middle of the tag. Adhere the two circle wreaths overtop of the dashing circle, making sure the wreaths are both showing.

Step thirteen. Adhere the patterned paper ‘July’ slightly overtop of the ‘July’ White Soft Finish Cardstock. Adhere the July word to the middle of the dashing circle. This finishes the right hand page of your planner spread.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my July Title Page.

Katelyn

Elizabeth Craft Designs Supplies:

https://linkdeli.com/widget.js?1559654439292

Other:

  • Distress Ink: Black Soot
  • Blending Tool with Foam
  • Graphic 45: Lost in Paradise – Utopian Fields, Lush Labyrinth and Welcome to the Jungle
%d bloggers like this: