Browsing Tag

Rusty Weathered

Uncategorized

My Hero

June 4, 2021

Good morning! Laura here today to share my next layout I created for ECD!
I really like to mix my papers from different collections as long as the color families are the same so for this layout I mixed some papers from the Mystical Winter paper pack, the Rusty Weathered and the Summer Art!

 

To create this layout:
Step 1 – Trim one paper to 11×7 and distress the edges, distress the edges of a 12×12 sheet and cut a ‘V’ into the top right of both papers about 2 1/2 ” from the edge. Cut one more piece of paper large enough to be adhered behind the cut ‘V’
Step 2 – adhere all the papers together and then cover with clear gesso and allow to dry

Step 3 – using watered down paints paint circles randomly in various sizes and also splatter some paint

Step 4 – Die cut 7 flowers and assemble. I die cut Florals 6, 8, 1, 2, 3, and 4 using white cardstock then painted them with the watercolor palette.

Step 5 – add your title

Step 6 – add some resin pieces, seed beads, art stones and cord to finish your layout!

Than you for stopping by and I hope I have inspired you to create something today!
~Laura

Scrapbooking

Good Job – Graduation Layout

May 4, 2021

Good morning! 
I am not a chronological scrapbooker. I scrapbook whatever I am inspired to, whenever I am inspired to, so I may scrapbook a photo from when our boys were little or from a couple of years ago when one of them graduated from high school. I find that I am much happier with my creations when I am inspired to create something. The beautiful colors from the Rusty Weather paper inspired me for this layout.

To create this layout:
Step 1 – Trim our papers to the following sizes: 1 at 12″x12″, 1 at 12″x11″, 1 at 12″x7″ and 1 at 12″x6″ and a photo mat. Distress all edges.

Step 2 – Die cut, ink and assemble 10 flowers and 4 leaves. I used florals 6, 8, 9, 1, 2, and 4.

Step 3 – Create your title and assemble as shown!

Thanks for stopping by
Laura

Elizabeth Craft Designs Supplies:

2 Comments
Uncategorized

Big Fish!

February 16, 2021

One of my first passions in Scrapbooking was paper layering! I love all the dimension and visual interest it adds.

To create this layout:
Step 1 – trim papers to these sizes and ink edges (I used a mixture of papers from the Reminiscence paper pack and the Rusty Weathered paper pack. )
12×12
10.5×11
9×10
7×9
3×7


Step 2 – die cut the following and ink the edges:
1 tab piece from 1603 planner essentials
1 tag top from 1744 Planner Essentials 26
2 of the largest stitched Indented Square
3 flowers with leaves from your favorite ECD floral dies (I used Florals 9 and Florals 7). ink edges and assemble

Step 3 – fussy cut the fish from the Reminiscence paper and ink the edges


Step 4 – Assemble as shown

Thanks for stopping by
Laura

Elizabeth Craft Designs Supplies:


Art Journal Collection Cardmaking Charlene Stamps

Create

January 26, 2021

Hi there,

It’s Tanja here and today I would like to show you how to create this card.

Step 1: Creating the Background

  • add color to a rectangular piece of smooth white cardstock with the help of Distress Oxide Inks (Old Paper, Evergreen Bough, Black Soot) and a Mini Ink Blending Tool

Step 2: Stamping

  • stamp the greenery from the Flowy Florals and Spring Fling sets with Versamark and heat-emboss it with WOW! Bright White Super Fine embossing powder
  • stamp the sentiment from the Journal Words set with Versafine Clair Nocturne
  • stamp some background text from the Journal Words set with Versamark and heat-emboss it with clear embossing powder
  • ink up the edges of the panel with Distress Oxide Ink Black Soot

Step 3: Assembly

  • add a thin strip of black cardstock to the top and bottom of the panel
  • adhere the panel to a cardbase covered with patterned paper from the Rusty Weathered paper pack

I hope you got inspired.

Hugs,

Supplies:

Other
black cardstock
Distress Oxide Ink (Old Paper, Evergreen Bough, Black Soot)
Versamark
WOW! Bright White Super Fine embossing powder
clear embossing powder
Versafine Clair Nocturne

Art Journal Collection Paper Flowers Scrapbooking

Just Chillin’

August 19, 2020

Good morning!
Laura here today to share my newest layout I created for ECD!

To create this layout:
Step 1 – trim a paper from the Rusty Weathered paper pack to 11 1/2 x 11 1/2 and distress the edges
Step 2 – adhere the paper to a piece of black cardstock distress the edges of the cardstock
Step 3 – mat the photo and distress the edges of the photo mat

Step 4 – die cut 3 Stitched Circles and create rolled flowers from coordinating papers

Step 5 – Die cut 2 Mandala from black cardstock and cut one in half

Step 6 – fussy cut 4 flowers from the patterned paper

Step 7 – die cut 3 Leafy Branch from black cardstock

Step 8 – adhere everything as shown

Thank you for stopping by
Laura

Elizabeth Craft Designs Supplies:

Uncategorized

I Love Right Now

July 22, 2020

Good morning! Laura here today to share my newest layout using many ECD products!

To create this layout
Step 1 – take two papers from the Rusty Weathered paper kit.


Step 2 – cut one line approximately in the center along the bottom about 3″ long and one on the side in the center about 2″ long. Using your paper distressor tool or scissors distress the edges of the slits and fold back and adhere with double sided tape
Step 3 – Adhere the two pages together and distress the edges
Step 4 – fussy cut 3 flowers from one of the pages


Step 5 – create a photo mat for your photo 1/2″ bigger than your photo
Step 6 – Die cut two frames using the fitted rounded rectangle die set. I used the 5 1/2″ and 5 1/4″ die
Step 7 – Die cut a 3 lightbulbs from the Planner Essentials 20 from coordinating papers
Step 8 – die cut 3 circles from the Stitched Circles and create 3 rolled flowers
Step 9 – create photo mat and cluster as shown above

Step 10 – Die cut 11, 1 3/4″ stitched hexagons and distress the edges

Step 11 – adhere as shown

Thanks for stopping by
Laura

Elizabeth Craft Designs General Joset Designs

Thinking Of You Card

May 4, 2020

Hi Everyone, it’s Tina here. Today’s card is inspired with our current situation globally. With the lockdown we are all thinking of the day we can visit our family and friends. Below are the steps to create your own Thinking Of You Card.

Step 1 – Trim White Soft Finish Cardstock to 7” x 8 1/2”, score at 3 1/2” and fold in half for a vertical side fold card. (Slimline)

Step 2 – Trim Green Cardstock to 3 1/2” x 8 1/2” and adhere to card front using 3mm Clear Double Sided Adhesive Tape.

Step 3 – Trim Rusty Weathered Patterned Paper to 3 1/2” x 8 1/2”. Diecut Frame It Stitched Circles 3 times. Start in the middle and then diecut top then bottom for 3 windows. If you don’t have Frame It Stitched Circles you can use Stitched Circles.

Step 4 – Diecut Blooming Branches using Green Cardstock 4 times. Randomly trim and place along with windows from the background created from Step 3. Adhere tips to the backside of the background using Kids Choice Glue. Adhere to whole panel to the card front using 3mm Clear Double Sided Adhesive Tape.

Step 5 – Diecut Monkey 3 times using Earth Tone colours (browns and taupe). Assemble and adhere to card using Kids Choice Glue.

Step 6 – Stamp Build Your Own Sentiment using Versamark. Sprinkle White Embossing Powder and remove the excess. Heat set it with a heat tool. Trim and adhere to card using 3mm Clear Double Sided Adhesive Tape.

Step 7 – Diecut Words 2 – Thinking Of You (You die) using White Soft Finish Cardstock 3 times. Glue each layer and adhere to card just under the sentiment using Kids Choice Glue.

This card can be used for several occasions by changing the sentiment, background papers and colours. Below is a link to all the products used. Thank you for stopping by and Happy Crafting!

Products Used:

Art Journal Collection Charlene Stamps

Rusty Artist Trading Card Duo

April 21, 2020

Hi there,

It’s Tanja here and today I would like to show you how to create this Rusty Artist Trading Card Duo.

Step 1: Creating the Background

  • cut a 10” x 15” piece of patterned paper from the Rusty Weathered paper pad
  • add white liquid acrylic paint and some Alcohol Inks for an even rustier look
  • cut the panel into two halves

Step 2: Adding more Texture

  • adhere some torn washi tape to random areas
  • apply Prima Marketing Texture Paste Platinum Crackle through the Story Telling and Make your Mark stencils
  • stamp the large elements from the Words and Layers stamp set with Versafine Clair Fallen Leaves
  • ink up the edges with Distress Ink Ground Espresso and heat-emboss them with Distress embossing powder Vintage Photo

Step 3: Finishing the Project

  • adhere the panel to a slightly larger piece of kraft cardstock
  • add the sentiments – one is from the Words and Layers set and one is from my vintage typewriter stash

Stay safe.

Hugs,

Elizabeth Craft Designs Supplies:


Others:
white liquid acrylic paint
Alcohol Ink
Prima Marketing Texture Paste Platinum Crackle
washi tape
Versafine Clair Fallen Leaves
Distress Ink Ground Espresso
Distress Embossing Powder Vintage Photo
WOW! Bright White Super Fine embossing powder
kraft cardstock
Versamark

%d bloggers like this: