Browsing Tag

Bubbles

Art Journal Collection Joset Designs Planner Essentials Sidekick Essentials Soft Finish Cardstock

Beautiful Sidekick Planner Page

June 25, 2020

Hey Crafters! Katelyn here, sharing with you my Beautiful Sidekick Planner Page.

To create my Beautiful Sidekick Planner Page, I’ve used a variety of dies from the Sidekick and Planner Essentials Collection as well as a couple of dies from Joset Designs and the Art Journal Specials Collection. You’ll want to read below as I share with you how to recreate my sidekick planner page at home.

Step One. Die cut the page from the Sidekick Essentials 3 die out of White Soft Finish Cardstock. Sprinkle Magenta Nuance in Turquoise, Jade and Rosebud on the page as desired. Spritz the powder with water. Once dry, ink the edges of the page using Walnut Stain Distress Ink and a blending tool with foam.

Step Two. Choose one of the reinforcements from the Reinforcement Variety Pack. Die cut the reinforcements out of kraft cardstock. You’ll need a total of six reinforcements. Ink the edges of the reinforcements using Walnut Stain Distress Ink and a blending tool with foam.

Step Three. Die cut the Bubbles die out of a piece of kraft cardstock. Cut the bubbles down to a piece that is 2 3/4″ wide.

Step Four. From the Blooming Branches die, die cut each branch out of a piece of book page.

Step Five. Die cut the heart branch from the Planner Essentials 25 – Double Heart Insert out of Spring Green Soft Finish Cardstock.

Step Six. Die cut the Beautiful Banner from the Sidekick 7 die out of White Soft Finish Cardstock. I didn’t use the positive pieces on the final page. Ink the edges of the banner using Walnut Stain Distress Ink and a blending tool with foam.

Step Seven. Choose three pieces of patterned paper that all coordinate together. From the first patterned paper, die cut the small note piece from the Planner Essentials 21 – Note Pieces die. From the second patterned paper, die cut the small note piece again. From the third patterned paper piece, die cut the curved stitched rectangle out of it. Ink the edges of all three pieces using Walnut Stain Distress Ink and a blending tool with foam.

Step Eight. You’ll need two more patterned papers that go with the previous three. From the first patterned paper, die cut a 3/4″ Stitched Diagonal Fishtail. From the second patterned paper, die cut a 3/8″ Stitched Diagonal Fishtail. Ink the edges of both pieces using Walnut Stain Distress Ink and a blending tool with foam.

Step Nine. Die cut the slotted rectangle from the Sidekick Essentials 5 die out of a piece of vellum.

Step Ten. Choose one more patterned paper that goes with the previous patterned papers. Die cut the stitched rectangle from the Sidekick Essentials 8 out of the patterned paper piece. Ink the edges of the rectangle using Walnut Stain Distress Ink and a blending tool with foam.

Step Eleven. Adhere the reinforcements over top of the circles on the page. Adhere the slotted vellum rectangle piece 7/8″ from the left and 7/8″ from the bottom of the page.

Step Twelve. Adhere the 3/8″ fishtail to the 3/4″ fishtail. Adhere the 3/4″ fishtail 1 3/8″ from the right and 5/8″ from the bottom of the page. Adhere the bubbles to the middle of the slotted rectangle.

Step Thirteen. Adhere one of the small note pieces to the right hand side of the stitched rectangle, making sure 1/4″ is still visible. Foam square the stitched rectangle 7/8″ from the left and 1 3/4″ from the top of the page. Adhere the other note piece 1 1/8″ from the left and 2″ from the top of the page. Adhere the curved rectangle 1 3/4″ from the left and 2 3/8″ from the top of the page.

Step Fourteen. Adhere the two book page branches as desired to the middle of the note piece and curved rectangle. Adhere the heart branch to the middle of the other two branches. Foam square the beautiful banner 7/8″ from the left and 1 5/8″ from the bottom of the page.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Beautiful Sidekick Planner Page.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Walnut Stain
  • Blending Tool with Foam
  • Emerald Creek Craft Supplies: Pam Bray Digital Paper – White Crinkle Abstract
  • Graphic 45: Bloom Collection
  • Magenta Nuance: Turquoise, Jade and Rosebud
  • Misc: Kraft Cardstock, Book Page and Vellum
Art Journal Collection Elizabeth Craft Designs General Joset Designs Soft Finish Cardstock Watercolor Palette

We Are Stronger Together Wall Hanging

June 4, 2020

Hey Crafters! Katelyn here, sharing with you my We Are Stronger Together Wall Hanging.

To create my We Are Stronger Together Wall Hanging, I’ve used a variety of dies, stamps and stencils from the Art Journal Specials Collection as well as a couple of dies from Joset Designs. You’ll want to read below as I share with you how to recreate my wall hanging at home.

Step One. Die cut a 4″ Stitched Rounded Rectangle out of White Soft Finish Cardstock. Place the Spring Flower Mandala Stencil on the left hand side of the rectangle. Use a palette knife and put Texture Paste Opaque Matte through the stencil. Remove the stencil. Allow the stenciled image to dry. Once the image is dry, spray Distress Spray Stain in Cracked Pistachio and Wilted Violet over the stenciled image. Once dry, ink the edges of the rectangle using Black Soot Distress Ink and a blending tool with foam.

Step Two. From a piece of book page, die cut a 4 1/2″ Stitched Rounded Rectangle Die. Ink the edges of the rectangle using Black Soot Distress Ink and a blending tool with foam.

Step Three. Die cut a 1 1/2″ Diagonal Stitched Fishtail out of White Soft Finish Cardstock. Die cut a 1 1/8″ Diagonal Stitched Fishtail out of Book page. Ink the edges of both fishtails out of Black Soot Distress Ink and a blending tool with foam.

Step Four. From the Budding Florals die, die cut the single bud out of black cardstock.

Step Five. From the Blooming Branches die, die cut the heart branch out of a piece of book page.

Step Six. Die cut the the lamp standard from the Streetlights die out of White Soft Finish Cardstock. Apply Emboss It Ink to the lamp standard. Sprinkle Boho Blends – Wrought Iron Embossing Powder over the entire surface of the lamp standard. Tap off the excess powder and emboss with a heat tool.

Step Seven. Die cut the the Bubbles from the Bubbles die out of White Soft Finish Cardstock. Apply Emboss It Ink to the Bubbles. Sprinkle Peppered Chantilly Embossing Powder over the entire surface of the bubbles. Tap off the excess powder and emboss with a heat tool.

Step Eight. From the Budding Florals die. Die cut the bud strip out of kraft cardstock.

Step Nine. Die cut the left hand side of the Ornate Gateway out of White Soft Finish Cardstock. Apply Emboss It Ink to the gate. Sprinkle Hammered Metal Embossing Powder over the entire surface of the gate. Tap off the excess powder and emboss with a heat tool.

Step Ten. Choose one of the girls from the Floral Girls stamp set. Apply Jet Black Archival Ink to the girl stamp and stamp onto a piece of watercolor paper. Colour the girl in using the Watercolor Palette. Once the image has dried, fussy cut the girl out. Ink the edges of the girl using Black Soot Distress Ink and a blending tool with foam.

Step Eleven. Apply Emboss It Ink to the We Are stamp from the Words & Layers stamp and stamp onto a piece of White Soft Finish Cardstock. Apply Emboss It Ink to the stronger together words from the same stamp set and stamp onto the same piece of White Soft Finish Cardstock. Sprinkle Boho Blends – Wrought Iron Embossing Powder over the We Are and stronger together words. Tap off the excess powder and emboss with a heat tool. Fussy cut the We Are out and cut the stronger together into a strip. Ink the edges of the We Are and strip using Black Soot Distress Ink and a blending tool with foam.

Step Twelve. Adhere the 4″ stitched rounded rectangle to the 4 1/2″ stitched rounded rectangle.

Step Thirteen. Adhere the 1 1/2″ fishtail 1/4″ from the left and 1/4″ from the bottom of the 4″ rectangle. Adhere the 1 1/8″ fishtail 3/4″ from the left and 1/2″ from the bottom of the 4″ rectangle. Adhere the bubbles die cut 1/8″ from the left and 1/4″ from the bottom of the 4″ rectangle.

Step Fourteen. Adhere the gate overtop of the bubbles and fishtails. Foam square the bud strip to the middle of the gate. Adhere the light standard and single bud as desired to the middle of the bud strip.

Step Fifteen. Foam square the girl 1″ from the right and 1/2″ from the bottom of the 4″ rectangle. Use foam squares to adhere the We Are words 1″ from the bottom of the 4″ rectangle and close to the girl. Adhere the stronger together word strip 3/8″ from the right and 3/4″ from the bottom of the 4″ rectangle.

Step Sixteen. To finish the wall hanging, punch two holes at the top of the 4″ rectangle. Tie a piece of twine through the top of each hole.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my We Are Stronger Together Wall Hanging.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Black Soot
  • Distress Spray Stain: Cracked Pistachio and Wilted Violet
  • Blending Tool with Foam
  • Ranger Ink: Jet Black Archival Ink, Texture Paste Opaque Matte and Emboss It Ink
  • Emerald Creek Craft Supplies: Peppered Chantilly Embossing Powder, Hammered Metal Embossing Powder and Boho Blends – Wrought Iron Embossing Powder
  • Misc: Black Cardstock, Kraft Cardstock, Book Page and Twine
A Way With Words

Happy Anniversary

June 18, 2016

Happy Anniversary card elizabeth craft designs suzanne cannon kathy jo 3
Hello Crafty Friends! Last weekend my hubby and I celebrated our 9th anniversary. Of course, I made a card for him! For the card I wanted to make something manly with cool papers and textures. He received the card and told me how much he really liked the card: the Happy Anniversary die cut, the “rustic metal looking papers” (his words), and the colors. It appears that my hubby is not only a fan of my work but also of ECD supplies!

Continue Reading

%d bloggers like this: