Step 3 – Die cut a Mandala and cut in half and a filmstrip from the Planner Filmstrip and ink or paint the edges Step 4 – Die cut 3 ferns from Ferns and ink or paint edges
Step 5 – Die cut the tab from the Planner Filmstrip and adhere to the photo and mat
Step 6 – Die Cut 2 small filmstrips from the Planner Essentials 24 and ink or paint edges Step 7 – Die cut 10 flowers using your favorite ECD floral Die. Ink, mold, and assemble those flowers. I used Florals 8, Florals 3, Florals 13, Florals 11 and Florals 2 Step 8 – Adhere everything as shown
Now for my second layout:
To create this layout: Step 1 – cover a 12×12 sheet of soft finish cardstock with white gesso and allow to dry or heat set Step 2 – using the Watercolor Palette paint along the tears and into the paper as light or dark as you like
Step 3 – tear two strips pf each side of the paper Step 4 – tear 4 pieces of paper long enough to be placed behind the tears of the cardstock. I used the Reminiscence The Book 2
Good morning! Laura here today to share my next layout I created for ECD! I really like to mix my papers from different collections as long as the color families are the same so for this layout I mixed some papers from the Mystical Winter paper pack, the Rusty Weathered and the Summer Art!
To create this layout: Step 1 – Trim one paper to 11×7 and distress the edges, distress the edges of a 12×12 sheet and cut a ‘V’ into the top right of both papers about 2 1/2 ” from the edge. Cut one more piece of paper large enough to be adhered behind the cut ‘V’ Step 2 – adhere all the papers together and then cover with clear gesso and allow to dry
Step 3 – using watered down paints paint circles randomly in various sizes and also splatter some paint
Good morning! One of my favorite subjects to scrapbook is the beach!
To Create this layout:
Step 1 – Cover your paper with clear gesso then trim your paper (I used a paper from the Summer Art pack) to 11.5×11.5
Step 2 – use texture paste and your favorite ECD stencil (I used the Spring Flower Mandela) on the left side middle Step 3 – use gel medium and another stencil on the rest of the paper (I used the circles from the pattern stencil pack)
Step 4 – distress the paper edges and adhere to a 12×12 sheet with distressed edges
Good morning! I am so excited to share my next layout for my nieces upcoming wedding!
To create this layout Step 1 – gather 2 sheets of 12×12 paper, create ‘indents’ on your top sheet and distress the edges of both. (I used the Summer Art paper pack) Step 2 – fussy cut 5 flowers from the paper or die cut 5 flowers using your favorite dies
Step 3 – die cut 2 Mandala’s Step 4 – die cut, ink and assemble 3 of your favorite florals – I used Florals 8 and Florals 6 Step 5 – Die cut 3 of your favorite leaves – I used the leaves from florals 2
Step 6 – Die cut the top floral of the pizza box then trim the square off Step 7 – Assemble as shown and enjoy!
Hey Crafters! Katelyn here, sharing with you my Love You Card.
To create my Love You Card, I’ve used a variety of dies and stamps from Suzanne Cannon as well as dies from Jost Designs and Els van de Burgt Studio. You’ll want to read below as I share with you how to recreate my card at home.
Step One. From the Worn Wood Paper Pack, choose one of the patterned papers. Die cut a 4″ Stitched Indented Rectangle out of the paper. Distress the edges of the rectangle. Ink the edges of the rectangle using Black Soot Distress Ink and a blending tool with foam.
Step Two. Choose one of the patterned papers out of the Summer Art Paper Pack. Die cut a 3 3/4″ Fitted Indented Rectangle out of the paper. Distress the edges of the rectangle. Ink the edges of the rectangle using Black Soot Distress Ink and a blending tool with foam.
Step Three. Choose another piece of the patterned papers out of the Summer Art Paper Pack. Die cut a 3 1/2″ Stitched Indented Rectangle out of the paper. Distress the edges of the rectangle. Ink the edges of the rectangle using Black Soot Distress Ink and a blending tool with foam.
Step Four. Choose one of the patterned papers out of the Summer Art Paper Pack. Die cut a 3 3/4″ Stitched Oval out of the paper. Distress the edges of the oval. Ink the edges of the oval using Black Soot Distress Ink and a blending tool with foam.
Step Five. Die cut the Flourished Frame out of a piece of White Soft Finish Cardstock.
Step Six. Die cut the Flourished Oval Frame out of a piece of White Soft Finish Cardstock.
Step Seven. Die cut the three hearts die from the Entwined Hearts die out of a piece of White Soft Finish Cardstock. Die cut the three hearts again twice out of one of the previously used patterned papers. You’ll need a total of three white hearts and six of the patterned paper hearts.
Step Eight. From the Love & Hearts Collection Stamp Set, you’ll need the Love You sentiment, the plain heart and the two patterns that go inside of the plain heart. Apply Emboss It Ink to the Love You Sentiment and stamp onto a piece of White Soft Finish Cardstock. Sprinkle Copper Scroll Modern Gilding Powders over the stamped sentiment. Tap off the excess powder and emboss with a heat tool. Apply Emboss It Ink to the plain heart and stamp onto a piece of White Soft Finish Cardstock. Sprinkle Kells Gold Modern Gilding Powders over the stamped heart. Tap off the excess powder and emboss with a heat tool. Repeat the previous step for the other plain heart. Apply Milled Lavender Distress Ink to the Love you pattern and stamp in the middle of one of the embossed hearts. Apply Victorian Velvet Distress Ink to the heart pattern and stamp in the middle of one of the embossed hearts. Fussy cut the hearts and sentiment out. Ink the edges of the hearts and sentiment using Black Soot Distress Ink and a blending tool with foam.
Step Nine. Adhere the flourished frame to the 4″ rectangle.
Step Ten. Foam square the 3 1/2″ rectangle to the 3 3/4″ rectangle Adhere the 3 3/4″ rectangle to the 4″ rectangle.
Step Eleven. Foam square the stitched oval to the middle of the 3 1/2″ rectangle. Adhere the flourished oval to the stitched oval.
Step Twelve. Use foam squares and adhesive to adhere the two embossed hearts to the middle of the stitched oval. Use adhesive and foam squares to adhere the Love You sentiment to the bottom right side of the two hearts.
Step Thirteen. Use adhesive to adhere the nine hearts as desired on the card front.
Step Fourteen. To finish the card, cut a cardbase out of White Soft Finish Cardstock that measures 5 1/4″ x 8″, score at 4″. Adhere the cardfront to the cardbase.
Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Love You Card.
Elizabeth Craft Designs Supplies Used:
Other Supplies Used:
Distress Ink: Black Soot, Milled Lavender and Victorian Velvet
Blending Tool with Foam
Ranger Ink: Emboss It Dabber
Quietfire Designs: Kells Gold Modern Gilding Powders and Copper Scroll Modern Gilding Powders
Good morning! Laura here today to share a summer layout!
To create this layout: Step 1 – Using your favorite ECD papers (I used Summer Art) have one 12″x12″ or 30cm x 30cm paper, trim another to 3″x6″ or 7.5cm x 15.25cm, and trim one more 4″x 7.25″ or 10.15cm x 18.5 cm, and one at .75″x 6″ or 2cm x 15.25cm Ink all the edges of the papers Step 2 – using coordinating cardstock die cut 4 silhouetted circles of varies sizes using your favorite ECD circle die (I used stitched circles) and 3 silhouetted rectangles and 1 full rectangle of various sizes (I used stitched rectangles)
Good morning! I am excited to share my next creation for Elizabeth Craft Designs! I am IN LOVE with the new Summer Art paper line and I finally got a chance to create with it….the designs and colors are outstanding!
To create this layout:
Step 1 – cover both sides of your paper with clear gesso ( I used the Summer Art Collection) Step 2 – mix texture paste with a coordinating color of colorant (I chose tainted love teal from Lindys Stamp gang) Step 3 – use your favorite ECD stencil and the colored texture paste approximately 2.5″ or 6 cm from the left hand side of your paper (I used the waves stencil) Step 4 – while texture paste is still wet sprinkle Silk Microfine Glitter at top the image (I used copper)
Step 5 – place two pieces of cheesecloth (1 at least 12 inches or 30.5 cm long and one about 8 inches or 10cm ling) in a resealable freezer bag and color with your favorite mist or powder. (I used Lindy’s magical powders in Cowabunga copper and Hags Wart Orange). Remove from bag with tweezers or wearing gloves and dry with your heat gun Step 6 – adhere the cheesecloth as shown in photos
Step 7 – fussy cut two small flowers, one large flower cluster, a turtle and a set of leaves from the paper and ink the edges
Step 10 – grab your favorite chipboard title and heat emboss twice, on the third embossing sprinkle silk microfine glitter into the while you are heat setting the embossing powder. I do not normally take photos in direct sunlight but I wanted to share the glitteriness of the effect Step 11 – create a photo mat, ink the edges of the mat as well as the background paper. Adhere everything as shown and add some seed beads!