Good Morning Creative Friends, it is Karan Gerber here to share a project with you today. This time i am sharing a card with you using one of my most favorite Floral dies, Florals 6.
I have put together a card using florals 6, the beautiful leaves from Planner Essentials 55 and Stitched Rectangles. I cut 3 of each of the flowers small medium and large so i could get a very full flower At this point i wasnt sure just how many i would use to create my flowers, on this card, my favorite, is a peony.
To achieve the look on the florals, i used distress sprays and patina alcohol ink. I first colored parts of the florals with peacock feather distress ink. and used peeled paint distress ink on the leaves. I also added some snow paste on them to add some texture.
I used Dragons eye Spark paint from prima on the leaves form the planner essentials set.
I hope you like my project share today. Have you tried creating flowers with florals 6 lately? Until next time, Happy Scrapping!
Hello Friends and thank you for dropping in. Today I am sharing a card with you. This is designed using Florals 6, along with the Stitched Indented Rectangles and a couple new stencils on the background.
I started by cutting out three of each of the floral sizes from florals 6 onto the soft finish cardstock. I also cut out five of the leaves.
The Florals I also cut out 3 of small florals from Florals 16. I colored the Florals 6 using Saltwater Taffy Distress Ink, and the Florals 16 using scattered straw. I then shaped the Florals 6 forming three peonies. The small florals 16 i just inserted a wired stamen.
The Background I wanted to use the new stencils and started by stamping CS146 Background Stamp with Black Archival Ink, I also used CS253 Note Pieces ( the smaller graph stamp) Once I stamped the images, I used the S044 Planner Stencils 1 and I used Light Texture Paste. I then used the Number Stencil and used a blending tool using Saltwater Taffy on the background creating a tone on tone color. I then splatter some white acrylic ink and gold paint
I cut some stitched indented rectangles and only used strips of them to add some layers, what a great way to add layers, without all the bulk of a full layer.
I used peach threaded pollens in the center of the peonies and thought they blend so beautifully with the colors in the pattern paper.
I hope you have enjoyed my project today. Until Next Time.
Good morning! I am back today to share my nest layout I created for ECD!
To create this layout Step 1 – Cover a 12×12 sheet with clear gesso and allow to dry or heat set. Distress the edges of the paper
Step 2 – use your favorite ECD to stencil (I used one from the happy patterns) and texture paste Step 3 – use your Watercolor Palette to highlight the stenciled image Step 4 – use a fan brush and create a splatter effect over the stenciled image
Good morning! Laura here today to share my next layout I created for Elizabeth Craft Designs! This is our youngest son on the day of his prom!
To create this layout: Step 1 – rip a piece of your favorite ECD paper about 4 -5″ wide, then wet the edges and roll them Step 2 – from the leftover sheet rip a piece for the side 7″ long and 1 – 1.5″ wide Step 3 – cover your cardstock background and the 2 pieces of paper your tore with clear gesso – allow to dry then adhere like shown
Step 4 – use your favorite ECD stencil and your favorite paste randomly around your paper – I used the Pattern Stencil Pack and allow to dry or heat set Step 5 – die cut 9 of your favorite ECD flowers, ink, shape and assemble. I used the florals 1, 3, 4, 6, 8, 10, 11, and 13. Here are some close ups of some of the flowers
Step 6 – Die cut and ink your favorite leaves and branches – I used the Lacy Leaves and Ferns.
Step 7 – add Leaves and branches and flowers into clusters as shown
Step 8 – Die cut and ink your title and distress the edges – I used the Sentiment Strips. Step 9 – cut two photo mats one slightly larger than the other then ink and distress the edges Step 10 – adhere everything as shown and add seed beads and art stones
Good morning! Laura here today to share my next layout I created for ECD! I really like to mix my papers from different collections as long as the color families are the same so for this layout I mixed some papers from the Mystical Winter paper pack, the Rusty Weathered and the Summer Art!
To create this layout: Step 1 – Trim one paper to 11×7 and distress the edges, distress the edges of a 12×12 sheet and cut a ‘V’ into the top right of both papers about 2 1/2 ” from the edge. Cut one more piece of paper large enough to be adhered behind the cut ‘V’ Step 2 – adhere all the papers together and then cover with clear gesso and allow to dry
Step 3 – using watered down paints paint circles randomly in various sizes and also splatter some paint
Good morning! One of my favorite subjects to scrapbook is the beach!
To Create this layout:
Step 1 – Cover your paper with clear gesso then trim your paper (I used a paper from the Summer Art pack) to 11.5×11.5
Step 2 – use texture paste and your favorite ECD stencil (I used the Spring Flower Mandela) on the left side middle Step 3 – use gel medium and another stencil on the rest of the paper (I used the circles from the pattern stencil pack)
Step 4 – distress the paper edges and adhere to a 12×12 sheet with distressed edges
Good morning! I am not a chronological scrapbooker. I scrapbook whatever I am inspired to, whenever I am inspired to, so I may scrapbook a photo from when our boys were little or from a couple of years ago when one of them graduated from high school. I find that I am much happier with my creations when I am inspired to create something. The beautiful colors from the Rusty Weather paper inspired me for this layout.
To create this layout: Step 1 – Trim our papers to the following sizes: 1 at 12″x12″, 1 at 12″x11″, 1 at 12″x7″ and 1 at 12″x6″ and a photo mat. Distress all edges.
Step 2 – Die cut, ink and assemble 10 flowers and 4 leaves. I used florals 6, 8, 9, 1, 2, and 4.
Hello Friends and Welcome! It’s Karan Gerber here today to share some florals with you. I am in love with the floral dies and today I am sharing a technique I came up with using Florals 6. Looking at this die, you might wonder what floral you can make of it. I decided this would make a great peony.
To begin with we will need to cut a few flowers from Florals 6
Here is my start, creating a 5×7 card base
I colored all the florals with Tea Rose Archival Ink and the leaves with Peeled Paint Distress Ink and Bundled Sage. I shaped them and then kept them close together while using my glue gun using stamens that complement the color.
Here is my finished card. I hope I have inspired you to give Florals 6 a try!
Thank you for dropping by today!
Other Products: Tea Rose Archival Ink; Peeled Paint Distress Ink; Bundled Sage Distress Ink, pale yellow stamens, dress my craft pale rose stamens, seam binding, archival re inker;
Good morning everyone! I am so excited to share my next layout with you!
To create this layout: Step 1 – Cover your favorite ECD paper with clear gesso and heat set or allow to dry – there are some beautiful papers to choose from here Step 2 – Use your favorite ECD stencil (I used one from the pattern stencil pack) and texture paste randomly on your page. Heat set or allow to thoroughly dry
Step 3 – Randomly stamp on and around where you added texture paste with a an ECD stamp of your choice (I chose the Frosty Patterns stamp) Step 4 – using a coordinating color from the watercolor palette sprinkle watercolor paints over the images then heat set
Step 5 – On photo paper indiscriminately add texture paste and heat set, then paint using at least 2 watercolor paints and heat set till dry Step 6 – Die cut 2 tags from Planner Essentials 7, and 2 elegant ornament (trimming the circle from one)
Good morning! I am so excited to share my next layout for my nieces upcoming wedding!
To create this layout Step 1 – gather 2 sheets of 12×12 paper, create ‘indents’ on your top sheet and distress the edges of both. (I used the Summer Art paper pack) Step 2 – fussy cut 5 flowers from the paper or die cut 5 flowers using your favorite dies
Step 3 – die cut 2 Mandala’s Step 4 – die cut, ink and assemble 3 of your favorite florals – I used Florals 8 and Florals 6 Step 5 – Die cut 3 of your favorite leaves – I used the leaves from florals 2
Step 6 – Die cut the top floral of the pizza box then trim the square off Step 7 – Assemble as shown and enjoy!