Browsing Tag

Sanna Lippert

Cardmaking Elizabeth Craft Designs General Els van de Burgt Studio Joset Designs Planner Essentials Stamping

Clean and simple cards with basic dies

July 9, 2021

Hello everyone, it’s Sanna here today with another guest design team project. This card idea originated from a wish to have a die that could cut chevron type backgrounds, which I didn’t own. But then I figured, I actually could use my existing dies to create a chevron pattern as a card background. And while I die cut the “chevrons”, I had plenty of pieces left to create two more fun cards. So one basic idea led to a set of cards that I’m quite happy with.

Here is how I created this card:

Step 1: I first die cut “frames” with the Stitched Rectangles die set by using the largest and the third largest die from the set. This way I had a bigger frame than if I had used the next to largest with the biggest size. I picked yummy, summery pastel cardstock for die cutting. I also kept the stitched rectangle pieces for later. You will see how I used them on the two cards to follow.
Step 2: After die cutting the frames I then took a card base and arranged the corners onto it in such manner, that they formed a “chevron” and marked the edges with a pencil. This way it was easier to know where to cut later. After that I just adhered the piece onto the card base with Clear Double Sided Adhesive Tape. Out of each frame I got two bigger parts for the chevron pattern and I also saved the smaller ones for the lower and the higher corners. So for this size of a card you only need 4 frames in total.

Step 3: After adhering all the corners onto the card base I took the Planner Essentials 21 “Note Pieces” set and die cut a focal point for the card from black cardstock.

Step 4: I then added a stamped and embossed sentiment using the Planner Essentials “Remember” stamp set with neon green embossing powder. After that I just adhered the sentiment with 3D foam onto the card to create more texture and interest. For finishing touches I added a few craft drops for decor. The residue pieces then let to the second card:

For this one I did the following steps with the residue papers I had left over from my first card:

Step 1 to 3: I placed the stitched rectangle cardstock pieces onto my die cutting machine and places a stitched oval die onto the middle of them and die cut 4 pieces to create the oval background piece for the next card. After that I took a leftover strip of the light blue cardstock and attached Clear Double Sided Adhesive Sheet onto it and die cut two “Budding Florals” for the card.

I then adhered the flowers on place, applied some liquid adhesive and loose golden glitter onto the upper area of the buds and let that dry. After the adhesive was dry, I just tabbed the residue glitter off. For the sentiment I used the General Sentiments stamp set with white embossing powder and a piece of black cardstock that was die cut with the Fitted Fishtail dies. Very easy, but still very colorful thanks to the multi-colored background piece. This then led to my last card project:

For this card I used the final stitched rectangle pieces, as shown in the steps here:

Step 1 to 3: I arranged the leftover pieces from the previous card onto the card base and cut them into size so that they filled the whole background. Then I die cut a focal piece from white cardstock using the Stitched Circles die cut die. I stamped and embossed a sentiment (using General Sentiments) and florals (using the Spring Fling stamp set) and golden as well as light green and pink embossing powders.

After embossing I inked the circle light yellow with Distress Ink. Next I die cut a piece of golden glitter carstock with the Scalloped stitched circle die to place under the sentiment piece and finished the focal piece off with some Fitted Fishtail dies.

So one idea led to a set of three fun cards and I basically worked with the same paper pieces from start to finish. Here are some close-ups of the finished cards:

I hope I could inspire you to take a second look at your basic dies to use them in a little different way! I´d love to see what kind of ideas you come up with. Wishing you a fabulous July and see you again next month with another card idea!

Happy crafting,
xxx, Sanna

Supplies:

Elizabeth Craft Designs:

Other:
Sizzix Big Shot A4
Pink, black, light green, yellow and blue cardstock
Embossing powder by Ranger and American Crafts
Golden glitter cardstock
3D foam squares
Heat tool – Ranger
Loose golden glitter

Cardmaking Elizabeth Craft Designs General Els van de Burgt Studio Joset Designs Planner Essentials Shimmer Sheetz Soft Finish Cardstock Stamping

Masculine graduation cards

July 7, 2021

Hello there everyone, it’s Sanna Lippert here again with another guest design team project. For today’s cards I created a set of two masculine, clean and simple, graduation cards. As my son finished high school level and exams this June, I need a nice card for his graduation festivities.

I used woodgrain patterned paper and instead of flowers, just leaves to add a special touch to the card. Also, the leaves are done out of Shimmer Sheets, to add just a touch of festivity to the card. Here is how the card is done:

Step 1: Take light blue Soft Finish Cardstock and using the Summer Fun Sentiments stamp set and grey Distress Oxide stamp ink, stamp the sentiment “well done” onto the carstock.

Step 2: Next die cut a piece of woodgrain paper using the Stitched Rounded Rectangles die cut die and then stamp “I´m so proud of you” with black stamp ink onto it using the Build Your Own Sentiment 1 stamp set.

Step 3: Take a darker blue toned cardstock to mat the stamped cardstock strip. This will make the stamped element stand out more from the background. Then adhere the pieces onto the cardbase.

Step 4: Take a piece of Shimmer Sheet and apply a Clear Double Sided Adhesive sheet onto it. Now run the sheet thru your die cutting machine, but don´t die cut the image thru (don´t use a metal plate in your die cutting machine). This way you will get an embossed image. Next take your precision scissors and cut around the edges of the “embossed” image.

Step 5: Adhere everything on place and add some faux stitching around the edges to finish off the card. Optionally you can also add a few Craft Drops for decor or leave the card as it is. You now have a easy-to-mail, flat, yet decorative, masculine card done.

Since I had all the products alraedy on my desk, I also did a second card using the same basic idea and the same products, but modified the idea a little. This is a great way to strech one basic idea and make several variations of it at once. Besides, it is always good to have a card or two for just in case as backup!

I hope I could inspire you to create masculine clean-and-simple styled cards yourself! See you again next month with another card tutorial. Until then, wishing you a lovely June.

Happy crafting,
Sanna

Supplies:

Elizabeth Craft Designs:

Other:
Sizzix Big Shot A4
Ranger Distress Oxide Iced Spruce
Acrylic block for stamping
Hero Arts Black Chalkboard stamp ink
3D adhesive foam

Cardmaking Craft Drops Elizabeth Craft Designs General Joset Designs Soft Finish Cardstock

Miss you, Mom! – card

May 6, 2021

Hello, It’s Sanna Lippert here again today with my monthly guest design team project. Now, I haven´t seen my mom since Christmas 2019 due to the pandemic, so for this Mother’s Day I made a card that says what I feel. I could imagine that there are other people out there who a dealing with the same problem, so I thought I’d share this card with you all today. But if you would rather like to say that you love your mom, then just change the sentiment. Easy!

For this card, I’ve created an easy-to-follow photo step-by-step. Here is how you can create this card:

Step 1: Start by die cutting 3 sets of the Ginko leaves from White Soft Finish Cardstock.

Step 2: Use green, yellow and pink Distress Ink tones and ink the die cut Ginko leaves.

Step 3: Cut a piece of blue cardstock to fit your card base size. Then adhere the inked Ginko leaves onto the blue cardstock either with Clear Double Sided Adhesive or liquid glue – whatever you prefer. Next cut off all excess pieces with scissors.

Step 4: Take a piece of White Soft Finish Cardstock and using the Build Your Own Sentiment 1 stamp set, stamp the word “mom” with black ink onto it.

Step 5: Take a piece of white foam rubber and attach it onto Clear Double Sided Adhesive sheet, then take the Blackboard Alphabet die set and die cut the words “miss” and “you” with your die cutting machine. Arrange and adhere the words onto the background piece. Then fussy cut the word mom into a suitable size and add Craft Drops for decor. When the drops are dry, adhere the piece onto a card base. I also stamped and fussy cut a little heart from the same stamp set and added it to the card, but that is totally optional.

This is how the finished card looks like. And it is still flat enough to put into the mail! I hope my mom likes the card and I hope you enjoyed this little card tutorial. And like always, by changing the sentiment and the colours you can use the same basic idea for different occations!

See you again next month, happy crafting!
xxx, Sanna

Supplies:

Elizabeth Craft Designs:

Other:
Foam rubber – white
Sizzix – Big Shot A4
Distress Ink – Twisted Citron, Kitsch Flamingo, Squeezed Lemonade
Ink blending tool
Black stamp ink
Scissors

Cardmaking Elizabeth Craft Designs General Els van de Burgt Studio Joset Designs ModaScrap Soft Finish Cardstock Stamping Videos

Clean and simple cards with basic fitted dies

April 7, 2021

Hello everyone, it´s Sanna Lippert here again today with another card tutorial share. Today I wanted to show you how you can use the basic fitted/nesting dies to create colorful, yet simple, card backgrounds in just a few simple steps.

You only need a selection of basic fitted dies (for exampe rectangles, stars, hexacons or squares), a stamp set and a selection of colored cardstock. I chose to do a more monochromatic pattern on the above cards, but you could do more variation by picking all colours of the rainbow for a background. Here is how these cards were done:

Step 1: Pick three colours of cardstock in similar tones (I used grey, teal and blue tones). Then pick three of the smaller sized nesting Stitched Rectangles and die cut two pieces each with the smaller dies from the cardstock and one bigger sized piece.

Step 2: Arrange the pieces onto a card base and adhere them on place with Clear Double Sided Tape. Flip the card over and cut any excess pieces with scissors.

Step 3: Take a piece of black cardstock and stamp a sentiment with the “Build Your Own Sentiment 1” stamp set using embossing ink and fine white embossing powder. Heat set the powder with a heat tool and adhere the sentiment onto the card with 3D foam pads. For additional detail you can add some embossed stars around the sentiment and a few Craft Drops, if you want to.

Here are some variations on you can do using other fitted dies – I used the Stitched Hexacons and Stitched Stars:

As you can see, by changing the color combination and the dies or the sentiments, you can create cards for various occations using the same basic idea!

I´ve also recorded the steps for you, so you get a better idea of each and every step:

I hope I could inspire you to make some fun card backgrounds with your nesting dies!! See you again next month with another card idea!!

Happy crafting,
xxx, Sanna

Supplies:

Elizabeth Craft Designs:

Other:
Sizzix Big Shot A4
Heat Tool – Ranger Inc.
Embossing ink – Nuvo
Embossing Powder , white – Ranger Inc.
3D foam pads – Scrapbook Adhesives

Cardmaking Craft Drops Elizabeth Craft Designs General Joset Designs Soft Finish Cardstock

Cards in candy colours

March 7, 2021

Hello everyone, it´s Sanna here again today with another guest design team project share. For a couple of days we´ve had beautiful sunshiny weather here in Austria and I am very much in spring mood already. Thus, a set of easy-to-do, candy coloured cards is my project share for today.

The first card is very simple to do, but due to the used dies, still creates a lovely layered and detailed look.

Here are the steps for this card:

Step 1: Take a piece of each (yellow, light blue, grey, pink and light green) Soft Finish Cardstock and die cut one piece of the Junk Journal Extras dies in each colour.

Step 2: Now take the smaller flower dies from the Tropical Florals die set and die cut the flower with pink, yellow and grey Soft Finish Cardstock.
Step 3: Next adhere the die cut pieces onto a white card base overlappingly and arrange the flower to the upper left corner for decoration.

Step 4: Finally, take a piece of kraft carstock and heat emboss a sentiment with white embossing powder using one of the sentiment in the Build Your Own Sentiments 1 set. For additional decor, add a few craft drops next to the sentiment.

For the second card, you will additionally need a few stamp inks to create the background, but other than that, we are sticking to the same Tropical Flowers die set and the candy coloured cardstock selection.

Here are the steps to this card:

Step 1: Die cut a strip of paper with the Adventure Edges die and create a cloud background to a white card base with it by applying yellow and light pink ink using the die cut border as a stencil.

Step 2: After that apply some ink droplets with the light pink tone onto the background for a fun additional detail. Use a paint brush or a water tank brush for this purpose.


Step 3: Die cut two leaves and one flower with the Tropical Flowers die set from the same Soft Finish Cardstock tones used on the first card.

Step 4: Arrange the leaves and the flower onto the right lower corner of the card and adhere on place. Then add a stamped sentiment with black stamp ink and the Build Your Own Sentiments 1 stamp set.

Step 5: For finishing touches add a few Craft Drops to the background.

Also if you are not into pastel tones, feel free to try out this set in primary colours or in more neutral tones. Changing the cardstock colours will give you a totally different look!

I hope you enjoyed today´s card ideas and got inspired to play yourself! Have a great time crafting and see you again next month!
xxx, Sanna

Supplies:

Elizabeth Craft Designs:


Other:
Distress Inks (Victorian Velvet, Squeezed Lemonade) – Ranger Inc.
Heat tool – Ranger Inc.
Black stamp ink – Hero Arts
Nuvo White embossing powder
Nuvo Embossing Ink

Cardmaking Elizabeth Craft Designs General Els van de Burgt Studio Joset Designs Silk Microfine Glitter Videos

Clean and simple Valentine´s Day cards

February 7, 2021

Hello everyone and happy Sunday! It´s Sanna here again with my monthly guest design team project share. I´d like to share a set of clean and simple Valentine´s Day cards with you today. I love using Silk Microfine Glitter and what better occation to do so, than Valentine´s Day! There just cannot be too much glitter on a Valentine´s Day card!

For my first card I´ve recorced a start-to-finish video for you to watch, because I wanted to share how I work with Silk Microfine Glitter and Clear Double Sided Adhesive on such a card. I find it easier to explain the steps thru a video.

For this project I used the Fitted Hearts die set with various red and pink tones of Silk Microfine Glitter as well as the very versatile Build Your Own Sentiments 1 stamp set. See the used products listed at the end of this blog post.

For my second card I got the idea from the Fitted Heart dies. I wanted to use just one big heart as a focal point on a card and that gave me the idea to use the gorgeous Astry Scenery Washi Tape with the die cut die.

Here is how I created the card:

Step 1: Take a piece of paper and cover it with washi tape strips.
Step 2: Die cut hearts in two sizes (big and tiny) from the “washi paper”.
Step 3: Arrange the hearts onto the card base and adhere on place.


Step 4: Take a dark blue cardstock strip and heat emboss a Build Your Own Sentiments 1 stamp set sentiment onto the strip.
Step 5: Fussy cut into a banner with scissors and adhere onto the card with 3D foam pads.

Both of the cards are very easy to do, so if you are planning on doing plenty for Valentine´s Day, you could consider doing one of these ideas, maybe. Wishing you a lovely Valentine´s Day! Let´s send those cards out to family, friends and loved ones, especially this year they mean so much to so many people!

Happy crafting,
xxx, Sanna

Supplies:

Elizabeth Craft Designs:

Other:

Sizzix Big Shot A4 die cutting machine
Acrylic block
Embossing ink
White Embossing Powder
White and dark blue cardstock
3D foam pads
Heat tool
Scissors


Cardmaking Craft Drops Elizabeth Craft Designs General Els van de Burgt Studio Planner Essentials Soft Finish Cardstock Stamping

Christmas present packaging set

December 6, 2020

Hello everyone, it’s Sanna here today with my last project for this year. Today I’d like to share a little set with you, consisting of a Christmas gitft tag, a Christmas card and a tiny Christmas box.

I’ll share the steps for the box as well as the tag, the card is done in the same way as the tag.

First take a piece of patterend paper in your choice of pattern and colours and die cut it using the Pizza Box die.

Now take a piece of white Soft Finish Cardstock and back it with Clear Double Sided Adhesive Sheet. Then die cut the circles, the flower pattern and the scalloped square piece with your die cutting machine.

Next adhere the scalloped square piece onto the box. After that ink the flower piece in two tones (I used Distress Ink in Victorian Velvet and Festive Berries here) to create more interest to the pattern. Then take the negative pieces and ink them blue (I used Distress Ink Salty Ocean for these parts).

Now adhere the flower pattern and the negative (blue inked) pieces in place. Then finish this step of the box by building it together.

Next add the same blue ink onto the bigger circle using an ink blending tool. Then take the smaller circle piece and add a stamped sentiment to it (I used Build Your Own Sentiment 1) and ink the edges red. Now layer the circles on top of each other and add Craft Drops around the inner circle for additional decor.

For the gift tag I combined the Pizza Box die cut set with the Planner Essentials 21 Note Pieces.

First die cut the pieces shown in the gallery above. I used white cardstock and the same patterned paper that I used for the box as I wanted to create a fun matching set. After die cutting, repeat the inking, stamping and assembling process like on the box before.

For a fun additional detail I added a stamped sentiment (I used the Winter Sentiments stamp set here) on top of the layered circles for both the card and tag. It just adds a little additional detail to them.

For the card I used the same Pizza Box die cut set and additionally die cut the patterned paper for the background using the Stitched Rounded Rectangle die set. The other steps are exactly the same like on the tag and the box before.

And by using only three colours it’s easy to keep the set harmonious. This gift set is perfect to carry a bracelet or small jewellery of some kind. If you change the color combination, you can easily do a completely different looking set using the exact same steps. Imagine using black and white and a hint of gold. Since the patterned paper I used is from my older stash, I added a few alternative paper suggestions to the product list below that I think would work nicely with red, white and blue color combination.

I hope that I inspired you with my little Christmas gift set today. This set could also easily be put into mail for those loved ones who we cannot see this year. I wish you all a lovely holiday time even though the situation we are all living in at the moment, is different then usual.

Wishing you all the best for this holiday season and lots of health!
xxx, Sanna

Supplies:

Elizabeth Craft Designs:

Other:
Sizzix – Big Shot A4
Ranger Inc. – Distress Ink (Salty Ocean, Victorian Velvet and Festive Berries)
Ink blending tool
Acrylic block for stamping
Ribbon

Elizabeth Craft Designs General Soft Finish Cardstock Stamping Videos

Clean and simple, die cut, Christmas present tag set

November 8, 2020

Hello everyone, it´s Sanna Lippert here again today with my monthly guest design team project. This time, I wanted to create a few Christmas present tags that are fast and easy to make and thus perfect if you need to make plenty!

And this is how I created the tags:

Step 1: Take light blue (or another color you prefer) Soft Finish Cardstock and die cut rounded rectangular pieces from the cardstock with your die cutting machine.
Step 2: Adhere Clear Double Sided Adhesive on a piece of Worn Wood patterned paper (pick a wooden pattern of your choice) and die cut the paper with the Sled die cut die.
Step 3: Now take a piece of light pink paper (for example from the Christmas Holidays paper pack) and die cut the tiny flowers from that paricular paper.

Step 4: Take another piece of Worn Wood (preferably pick another color for additional contrast) paper and die cut the upper tag pieces from that paper of your choice.
Step 5: Add pink Distress Ink around the edges of the die cut flowers for more contrast. Then adhere all pieces together/in place.
Step 6: Take a piece of (light) brown Soft Finish Carstock and using the Winter Sentiments stamp set, stamp and heat emboss the sentiment using white embossing powder. Fussy cut to a banner and adhere on place. Finish off with Craft Drops (alternatively use half pearls or rhinestones) and a piece of ribbon.

I´ve again also recorded a start-to-finish video for you to watch to give a better idea on each and every step. I hope you enjoy it!

This tag idea is so simple that you can die cut several tags at once and make plenty of Christmas present tags at once. You could even sit down with your children and craft together with them. And if you change the colours, they will again look different with the same basic idea.

Wishing you a great time crafting! See you again in December with another crafty tutorial. Take care, Sanna

Supplies:

Elizabeth Craft Designs:

Other:
Big Shot A4
Half pearls
Worn Lipstick Distress Ink
Ink Blending Tool
White Embossing Powder
Nuvo Embossing Pad
Heat tool
Ribbon and Scissors

A Way With Words Cardmaking Elizabeth Craft Designs General Joset Designs Soft Finish Cardstock Uncategorized Videos

Metallic toned cards

October 8, 2020

Hello everyone, it´s Sanna here again today with my October guest team member post. I am a big fan of white cardstock, because you can do so much with it. So this time I wanted to show you a simple idea how you can create different toned metallic shaded cards really easy with just a few steps.

Here is how this cards are done:

Step 1: Take the “Heart” background die and one or two “A Way With Words” word dies out. Take a sheet of White Soft Finish Cardstock and apply a sheet of Clear Double Sided Adhesive sheet onto the backside. Leave the foil on.
Step 2: Place the paper and the die cut dies into your die cutting machine and build a sandwich according to the instrucktions of your particular machine. Die cut 3 (or more) background pieces and as many sentiments as you have backgrounds.
Step 3: Now remove all negative elements from your white cardstock pieces.

Step 4: Place the die cut pieces on a kraft mat and apply a metallic paste with a blending brush in circular motion onto your die cut pieces. I used a pearl, a silver and a gold tone on the 3 cards I created and for the sentiments I tried to match each patterned paper tone, so I used bronze, pink and blue on those.
Step 5: Now adhere the tinted background pieces onto a patterned paper of your choice and adhere the sentiment on top. Decorate for example with half pearls, dimentional pearls or rhinestones. Finally, adhere to a card base.

This simple idea can be used with various background dies to add a little different look to your cards. The nice surface texture of the Soft Finish Cardstock also shows thru after tinting the paper which adds a really nice look to the cards.

I´ve again recorded a video to give you a better idea of the steps – hope you like it!

I hope you could inspire you to play more with your dies and white Soft Finish Cardstock. There are so many possibilities to add some color to it, this is just one of them.

I´ll be back with another card idea again next month! See you then.

Happy crafting,
Sanna

Supplies:

Elizabeth Craft Designs:

Other:
Sizzix Big Shot A4
Kaisercraft half pearls
Blending brush
Nuvo Embellishment Mousse

Cardmaking Craft Drops Elizabeth Craft Designs General Joset Designs Videos

Fast and fun sentiment card

September 6, 2020

Hello everyone, it´s Sanna Lippert here again today with another guest design team project share. For my September project I created a fun and a super fast to make card. This card can be finished in under ten minutes.

Here is how to make the card:

Step 1: Take a green plain or polka dotted paper and attach Clear Double Sided Adhesive on the back. Now take the legs from the Frog die and die cut 11 paires (for this card size) of legs. The adhesive on the back makes the adhering process very fast.
Step 2: Arrange the legs onto a ivory toned card base in rows of threes.
Step 3: Remove the adhesive backing and adhere the legs on place.
Step 4: Take a Dymo and type on black tape the sentence “break a leg”. Adhere on the card.
Step 5: Decorate with black liquid pearls, let dry and the card is done.

I´ve also recorded a short video to show you how fast such a card can be done. I hope you like the idea!!

See you again with another card project idea next month. Until then,
Happy crafting,
xxx, Sanna

Supplies:

Elizabeth Craft Designs:

Other:
Sizzix Big Shot A4
Black Liquid Pearls – Ranger Inc.
White card base – office supplies store
Dymo
Dymo tape – black

%d bloggers like this: