Browsing Tag

Transp. Glitter/Gold Dots

A Way With Words Elizabeth Craft Designs General Joset Designs Planner Essentials Soft Finish Cardstock

Merry Christmas Gift Tag

July 3, 2021

Hey Crafters! Katelyn here, sharing with you a little Christmas in July with my Merry Christmas Gift Tag.

To create my gift tag, I’ve used a variety of dies and stamps from Suzanne Cannon as well as dies from the Planner Essentials Collection. You’ll want to read below as I share with you how to recreate my gift tag at home.

Step One. Choose a piece of red lightly patterned paper from the Reminiscence the Book. Die cut the small tag from the Planner Essentials – 2 die out of the patterned paper. Ink the edges of the tag using Black Soot Distress Ink and a blending tool with foam.

Step Two. From the Flourished Christmas Minis 2 die, die cut the snowflake once out of White Soft Finish Cardstock and a second time out of silver foil paper.

Step Three. Die cut the stars once from the Peace on Earth Die out of Champagne foil paper. You’ll need a total of three stars.

Step Four. From the Christmas Collection Stamp Set, you’ll need the Merry Christmas words. Apply Jet Black Archival Ink to the words and stamp onto a piece of White Soft Finish Cardstock. Fussy cut the Merry word out and cut the Christmas word into a strip. Ink the edges of both pieces using Black Soot Distress Ink and a blending tool with foam.

Step Five. Adhere one star in the top right corner of the tag. Adhere the second star in the top left corner of the tag. Adhere the third star in the bottom left corner of the tag.

Step Six. Layer and adhere the two snowflakes together, making sure that the silver foil snowflake ends up at the top. Foam square the snowflakes to the middle of the tag. Add Trans. Glitter/Gold Dots to the silver snowflake as desired.

Step Seven. Adhere the Merry Christmas sentiment to the bottom right portion of the tag as desired. The merry and some of the Christmas will sit on the snowflakes.

Step Eight. To finish the tag, tie a piece of twine through the hole at the top of the tag.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Merry Christmas Gift Tag.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Ranger Ink: Black Soot Distress Ink and Blending Tool with foam
  • Misc: Silver Foil Paper, Champagne Foil Paper and Twine
Elizabeth Craft Designs General Joset Designs Paper Flowers Planner Essentials Soft Finish Cardstock

Happy Holidays Gift Tag

November 24, 2020

Hey Crafters! Katelyn here, sharing with you my Happy Holidays Gift Tag.

To create my Gift Tag, I’ve used dies from the Paper Flower Collection as well as a die from Joset Designs and the Planner Essentials Collection. You’ll want to read below as I share with you how to recreate my gift tag at home.

Step One. Choose a piece of patterned paper out of the Worn Wood Paper Pack. Die cut the large tag from the Planner Essentials – 2 die out of the patterned paper. Ink the edges of the tag using Walnut Stain Distress Ink and a blending tool with foam.

Step Two. Die cut the small plain circle from the Pizza Box die out of White Soft Finish Cardstock. Choose a piece of green patterned paper out of the Reminiscence Paper Pack. Die cut the stitched circle from the Pizza Box die out of the patterned paper. Ink the edges of both circles using Walnut Stain Distress Ink and a blending tool with foam.

Step Three. Die cut the two swirls from the Strawberries die out of a piece of silver foil.

Step Four. From the Florals 2 die, you’ll need the medium, small and extra small flowers. Die cut the three size of flowers twice out of White Soft Finish Cardstock. Using a blending tool with foam, blend Fired Brick Distress Ink over the entire surface of all the flowers.

Step Five. From the Florals 2 die, you’ll need all the leaves. Die cut the two different single leaves twice out of White Soft Finish Cardstock. Die cut the two leaf leaf out of White Soft Finish Cardstock. Using a blending tool with foam, blend Forest Moss Distress Ink over the entire surface of all of the leaves.

Step Six. From the Words 3 – Happy Holidays Die, you’ll need the Happy Holidays words. Choose a piece of Red patterned paper out of the Reminiscence Paper Pack. Die cut the words out of the red patterned paper.

Step Seven. Adhere the white circle to the green stitched circle. Foam square the green stitched circle to the middle of the tag.

Step Eight. Shape all the flowers. Adhere the three size flowers together. Repeat for the second flower. Put a Transp. Glitter/Gold Dot in the centre of each flower.

Step Nine. Shape all the leaves. Adhere two of the single leaves to the top left corner of the tag. Adhere two of the single leaves to the bottom left side of the tag. Adhere the two leaf leaf in the middle of the tag on the left hand side.

Step Ten. Foam square the two flowers over top of where the leaves meet.

Step Eleven. Adhere one of the swirls to the top right of the leaves at the top of the tag. Adhere the other swirl to the bottom left of the leaves at the bottom of the tag.

Step Twelve. Adhere the Happy Holidays words to the right of the flowers as desired. To finish the tag, tie a piece of twine through the top of the tag.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Happy Holidays Gift Tag at home.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Forest Moss, Fired Brick and Walnut Stain
  • Blending Tool with Foam
  • Misc: Silver Foil Paper and Twine
Elizabeth Craft Designs General Planner Essentials Soft Finish Cardstock Uncategorized

Merry Planner Page

November 12, 2020

Hey Crafters! Katelyn here, sharing with you my Merry Planner Page.

To create my Merry Planner Page, I’ve used a variety of dies from the Planner Essentials Collection. You’ll want to read below as I share with you how to recreate my planner page at home.

Step One. Choose a piece of Christmas patterned paper. From the Planner Essentials – 5 die, die cut one of the pages out of the patterned paper.

Step Two. From the Planner Essentials 14 – Bookmark 1 die, die cut the star reinforcements and the Merry word out of a piece of red cardstock. You’ll only need two of the star reinforcements.

Step Three. From the Planner Essentials 15 – Bookmark 2 die, die cut the snowflake ornament once out of White Soft Finish Cardstock and a second time out of Silver Foil Cardstock. From the white snowflake ornament, you’ll only need the cut out snowflake. From the Planner Essentials 14 – Bookmark 1 die, die cut the dotted ornament out of green cardstock. Die cut the plain ornament once out of White Soft Finish Cardstock and a second time out of red cardstock.

Step Four. Die cut the stars from the Planner Essentials 12 – Arrow Page & Trees out of a piece of foil paper. You’ll need a total of five stars.

Step Five. Die cut the dotted circle wreath from the Planner Essentials – Planner Pocket 2 twice out of White Soft Finish Cardstock.

Step Six. Adhere the star reinforcements over top of the circles on the page.

Step Seven. Adhere the two dotted circle wreaths on the page as desired. I layered the two wreaths together.

Step Eight. Adhere the dotted ornament to the red plain ornament. Adhere the silver foil snowflake ornament to the plain white ornament. Foam square the white snowflake to the middle of the silver foil ornament.

Step Nine. Foam square the dotted ornament 1 1/4″ from the bottom and to the right hand side of the circle wreath. Use adhesive and foam squares to adhere the snowflake ornament 1/2″ from the left and 3/4″ from the bottom of the page.

Step Ten. Adhere the Merry word to the bottom right side of the ornaments. Use foam squares to adhere the five stars as desired on the page.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Merry Planner Page at home.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Simple Stories: Simple Vintage North Pole Paper Pack and Textured Cardstock
  • Misc: Champagne Foil and Silver Foil
A Way With Words Elizabeth Craft Designs General Joset Designs Soft Finish Cardstock

Cheers Card

November 7, 2020

Hey Crafters! Katelyn here, sharing with you my Cheers Card.

To create my Cheers Card, I’ve used a variety of dies from Suzanne Cannon and Joset Designs. You’ll want to read below as I share with you how to recreate my card at home.

Step One. Choose two pieces of coordinating Christmas Patterned Paper. From the first patterned paper, die cut a 3 1/2″ Stitched Indented Rectangle. out of the second patterned paper, die cut a 3″ Stitched Indented Rectangle. Ink the edges of both rectangles using Black Soot Distress Ink and a blending tool with foam.

Step Two. From a piece of coordinating cardstock, die cut a 3 1/4″ Fitted Indented Rectangle. Ink the edges of the rectangle using Black Soot Distress Ink and a blending tool with foam.

Step Three. Die cut the Flourished Oval Frame out of White Soft Finish Cardstock. Apply Emboss It Ink to the frame and sprinkle Gothic Black Modern Gilding Powder over the entire surface of the frame. Tap off the excess powder and emboss with a heat tool.

Step Four. Die cut the Cheers word out of White Soft Finish Cardstock.

Step Five. From the Entwined Circles, die cut the snowflake five times out of White Soft Finish Cardstock. Apply a Transp. Glitter/Gold Dot to the center of each snowflake.

Step Six. Adhere the 3″ rectangle to the 3 1/4″ rectangle. Foam square the 3 1/4″ rectangle to the 3 1/2″ rectangle.

Step Seven. Foam square the flourished frame to the middle of the 3″ rectangle. Adhere the Cheers word to the middle of the frame.

Step Eight. Adhere the snowflakes as desired around the word on the frame.

Step Nine. Cut a cardbase out of White Soft Finish Cardstock that measures 3 1/2″ x 9 1/2″, score at 4 3/4″. Adhere the cardfront to the cardbase.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Cheers Card.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Black Soot
  • Blending Tool with Foam
  • Ranger Ink: Emboss It Dabber
  • Emerald Creek Craft Supplies: Gothic Black Modern Gilding Powder
  • Simple Stories: Simple Vintage North Pole Paper Pack and Color Vibe Textured Cardstock
Elizabeth Craft Designs General Els van de Burgt Studio Joset Designs ModaScrap Peel-Off Stickers Soft Finish Cardstock

How To Make This Mother’s Day Gift Box

May 6, 2019

Hey Crafters! Katelyn here, sharing with you my Happy Mother’s Day Gift Box. Mother’s Day is only 6 days away, so why not make a pretty gift box for that gift for mom?

To create this gift box, I’ve used dies and patterned paper from ModaScrap as well as dies from Joset Designs. I hope that you enjoy my tutorial!

Step 1. Choose a piece of patterned paper from the ModaScrap – Butterfly Dream Paper Pack. Die cut the Star Pillow Box die out of the patterned paper piece. Ink the edges of the box using Ground Espresso Distress Ink and a blending tool with foam.

Step 2. From the Words 3 – Happy Holidays die, die cut the “Happy Mother’s Day” sentiment out of White Soft Finish Cardstock.

Step 3. Die cut three Leafy Branch 2 out of White Soft Finish Cardstock. Using a blending tool with foam, blend Shabby Shutters Distress Ink over the entire surface of each leafy branch. Trim the branches to your desired length.

Step 4. Choose two of the Happy Flowers. Die cut the two Happy Flowers twice out of White Soft Finish Cardstock. Using a blending tool with foam, bend Picked Raspberry Distress Ink over the entire surface of the happy flowers.

Step 5. Assemble your Star Pillow Box.

Step 6. Adhere two of the happy flowers together and finish off the center of the flower with a Transp. Glitter/Gold Dots. Adhere the last two happy flowers together and finish off the center of the flower with a Transp. Glitter/Gold Dots.

Step 7. Start by adhering two of the leafy branches on the left hand side of the star pillow box. Adhere the two happy flowers overtop of the leafy branches.

Step 8. To finish off the pillow box, adhere the Happy Mother’s Day sentiment to the right hand side of the pillow box.

Thanks for joining me today. I hope that I’ve inspired you to create your own version of my Happy Mother’s Day Gift Box.

Katelyn

Elizabeth Craft Designs Supplies:

https://linkdeli.com/widget.js?1552642647875

Other:

  • Distress Ink: Ground Espresso, Picked Raspberry and Shabby Shutters
  • Blending Tool with Foam
Elizabeth Craft Designs General Joset Designs ModaScrap Soft Finish Cardstock

How To Create This Happy Spring Card

April 24, 2019

Hey Crafters! Katelyn here, sharing with you my Happy Spring Card. Spring is definitely here on the west coast of Canada and has been providing a ton of inspiration for my projects these days.

To create this card, I’ve used dies and patterned paper from ModaScrap as well as a stamp set from Joset Designs. I hope that you enjoy my tutorial!

Step 1. From the Blue Cotton Candy Paper Pack, you’ll need the white flower kraft patterned paper. Die cut the 4″ Dashing Rectangle out of the patterned paper piece. Ink the edges of the paper using Black Soot Distress Oxide Ink and a blending tool with foam.

Step 2. Die cut the 3 1/2″ Dashing Rectangle out of the White Soft Finish Cardstock. Sprinkle Aquamarine and Jade Magenta Nuance lightly in the middle of the rectangle piece. Spritz the powder with water. Once the paper has dried, ink the edges of the paper using Black Soot Distress Oxide Ink and a blending tool with foam.

Step 3. Die cut the 2 1/4″ Dashing Circle out of White Soft Finish Cardstock. Apply Cottage Ivy Memento Ink to the branch stamp from the Wedding Sentiments stamp set and start stamping in the circle. Reapply ink the branch as many time as needed to complete a circle of branches.

Step 4. Apply Onyx Black Versafine Ink to the Happy Spring stamp from the Spring Sentiments stamp set and stamp in the center of the circle. Add a Transp.Glitter/Gold Dot in between each stamped branch in the circle. Ink the edges of the circle using Black Soot Distress Oxide Ink and a blending tool with foam.

Step 5. From the Wood Effect Paper Pack, you’ll need to choose one of the wood patterned papers. Die cut the 2 3/4″ Dashing Circle out of the patterned paper piece. Ink the edges of the paper using Black Soot Distress Oxide Ink and a blending tool with foam.

Step 6. Die cut the Lace card out of White Soft Finish Cardstock. Cut the Lace card down to 4″.

Step 7. Die cut the three Dragonflies out of White Soft Finish Cardstock. Lightly sprinkle Jade and Aquamarine Magenta Nuance powder overtop of the dragonflies. Spritz the powder with water.

Step 8. Adhere the 3 1/2″ Dashing Rectangle piece to the 4″ Dashing Rectangle piece. Adhere the lace card element to the left hand side of the 4″ Dashing Rectangle.

Step 9. Adhere the Happy Spring circle to the wood circle. Foam square the wood circle 1 1/8″ from the left and 3/4″ from the top of the 4″ Dashing Rectangle.

Step 10. Adhere the dragonflies as desired around the Happy Spring circle. To finish off the card, cut a cardbase out of White Soft Finish Cardstock that measures 4″ x 10 1/2″, score at 5 1/4″. Adhere the card front to the card base.

Thanks for joining me today. I hope that I’ve inspired you to create your own version of my Happy Spring Card.

Katelyn

Elizabeth Craft Designs Supplies:

https://linkdeli.com/widget.js?1552642647875

Other:

  • Magenta Nuance: Jade and Aquamarine
  • Distress Oxide Ink: Black Soot
  • Blending Tool with Foam
  • Versafine: Onyx Black
  • Memento Ink: Cottage Ivy
Elizabeth Craft Designs General Els van de Burgt Studio Joset Designs ModaScrap Soft Finish Cardstock

Winter Wishes Christmas Card

September 6, 2018

Hey Crafters! Katelyn here, sharing with you my Winter Wishes Christmas Card. The inspiration came from Joset Designs Penguin Die. With that element of my card figured out, I added more with dies from Joset Designs and Els van de Burgt Studio to finish it off. I hope that you enjoy my tutorial!

Continue Reading

Elizabeth Craft Designs General Els van de Burgt Studio Joset Designs Krista Schneider Peel-Off Stickers Soft Finish Cardstock

Just Because… Tag

August 7, 2018

Hey Crafters! Katelyn here, sharing with you my Just Because… Tag. The inspiration came from Joset Designs’ Dreamcatcher Die. With that element of my tag figured out, I added more with stamps from Joset Designs, Els van de Burgt Studio, and Krista Schneider to finish it off. I hope that you enjoy my tutorial!

Continue Reading

Elizabeth Craft Designs General Joset Designs ModaScrap Soft Finish Cardstock

Happy Mother’s Day Gift Box

May 3, 2018

Hey Crafters! Katelyn here, sharing with you my Happy Mother’s Day Gift Box. Mother’s Day is only a couple of weeks away and why not create a beautiful little gift box to put your mom’s gift in? Using a variety of dies from Joset Designs and ModaScrap, my gift box came together quickly. I hope you enjoy my tutorial!

Continue Reading

%d bloggers like this: