Browsing Tag

6mm Clear Double Sided Adhesive

Art Journal Collection Elizabeth Craft Designs General Joset Designs Soft Finish Cardstock Watercolor Watercolor Palette

Imagine Wall Hanging

August 4, 2020

Hey Crafters! Katelyn here, sharing with you my Imagine Wall Hanging.

To create my Imagine Wall Hanging, I’ve used a variety of dies, stamps and stencils from Charlene and Ilse’s Art Journal Specials Collection as well as dies from Joset Designs. You’ll want to read below as I share with you how to recreate my wall hanging at home.

Step One. Die cut a 4 3/4″ Stitched Indented Square out of Black Cardstock. Distress the edges of the square.

Step Two. Die cut a 4 1/4″ Stitched Indented Square out of a piece of book page. Place the Storytelling stencil in the middle of the square. Using a palette knife and Texture Paste Opaque Matte through the stencil. Remove the stencil and allow the stenciled area to dry. Once the square is dry, distress the edges of the square. Ink the edges of the square using Walnut Stain Distress Ink and a blending tool with foam.

Step Three. Die cut the Bubbles out of White Soft Finish Cardstock. Apply Emboss It Ink to the entire surface of the bubbles. Sprinkle Burnt Copper Leaves embossing powder over the entire surface. Tap off the excess powder and emboss with a heat tool.

Step Four. Die cut the right Ornate Gateway die out of kraft cardstock. Ink the edges of the gateway using Walnut Stain Distress Ink and a blending tool with foam.

Step Five. From the Streetlights die, die cut the street lamp out of black cardstock.

Step Six. Die cut one of the blooming branches from the Blooming Branches die out of White Soft Finish Cardstock. Die cut the other bloom out of a piece of book page.

Step Seven. Choose two of the leaves from the Spring Fling Stamp Set. Apply Jet Black Archival Ink to both stamps and stamp onto a piece of watercolour cardstock. Colour the leaves in using the Watercolour Palette and a waterbrush. Once the images have dried, fussy cut them out. Ink the edges of the leaves using Walnut Stain Distress Ink and a blending tool with foam.

Step Eight. Next, you’ll need the cotton stamp from the First Sights of Spring Stamp Set. Apply Jet Black Archival Ink to the stamp and stamp onto a piece of watercolour cardstock. Colour the cotton in using the Watercolour Palette and a waterbrush. Once the image has dried, fussy cut it out. Ink the edges of the cotton using Walnut Stain Distress Ink and a blending tool with foam.

Step Nine. From the Morning Letters Stamp Set, you’ll need the letters to spell out Imagine. Apply Jet Black Archival Ink to each of the letters and stamp onto a piece of White Soft Finish cardstock to spell the word imagine. Fussy cut the word out. Ink the edges of the word using Walnut Stain Distress Ink and a blending tool with foam.

Step Ten. Adhere the 4 1/4″ stitched indented square to the 4 3/4″ stitched indented square.

Step Eleven. Adhere the bubbles to the middle of the 4 1/4″ stitched indented square. Foam square the ornate gate to the middle of the bubbles. Adhere the street lamp to the middle of the ornate gate.

Step Twelve. Adhere the first blooming branch overtop and to the left of the street lamp. Adhere the other blooming branch overtop and to the right of the street lamp. Adhere one of the stamped branches slightly overtop of the left blooming branch. Adhere the other stamped branch slightly overtop of the right blooming branch.

Step Thirteen. Foam square the cotton image to the middle of the branches making sure that you can see part of the street lamp. Use adhesive and foam squares to adhere the imagine word to the right side of the cotton.

Step Fourteen. Punch two holes at the top of the 4 3/4″ stitched indented square. Tie a piece of twine through the two holes to create the hanging part for your wall hanging.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Imagine Wall Hanging.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Walnut Stain
  • Blending Tool with Foam
  • Ranger Ink: Jet Black Archival Ink, Emboss It Ink and Texture Paste Opaque Matte
  • Emerald Creek Craft Supplies: Burnt Copper Leaves Embossing Powder
  • Misc: Black Cardstock, Kraft Cardstock, Book Page and Twine
Elizabeth Craft Designs General Planner Essentials Soft Finish Cardstock Uncategorized

How to Create a Inspire Pocket for your Planner

July 23, 2020

Hey Crafters! Katelyn here, sharing with you How to Create a Inspire Pocket for your Planner.

To create my Inspire Pocket, I’ve used a variety of dies and stamps from the Planner Essentials Collection. You’ll want to read below as I share with you how to recreate my pocket at home.

Step One. From the Planner Essentials 26 – Planner Pocket 4 – Tag & Toppers, die cut the pocket twice out of kraft cardstock. Place the pockets in front of you, making sure that on one pocket the angle faces right and on the other pocket the angle faces left. From the Background Stamps 1, you’ll need the chicken wire stamp. Apply Spiced Marmalade Distress Ink to the stamp and stamp randomly over the entire surface of both pockets. Fold the edges and then ink the edges of both pockets using Walnut Stain Distress Ink and a blending tool with foam.

Step Two. Add adhesive to the flaps on each pocket and adhere the two pockets together.

Step Three. Mark three holes on your pocket. One hole will be 1″ from the top and 1/4″ from the left of the pocket. The second hole will be 1 3/4″ from the top and 1/4″ from the left of the pocket. The third hole will be 1 1/8″ from the bottom and 1/4″ from the left of the pocket. Using a 1/4″ hole punch, punch the three holes you just marked.

Step Four. Choose a reinforcement from the Reinforcement Variety Pack. Die cut the reinforcements out of a piece of black cardstock. You’ll need a total of six reinforcements.

Step Five. From the Planner Essentials 26 – Planner Pocket 4 – Tag & Toppers die, die cut the stitched banner out of White Soft Finish Cardstock, the inspire word out of kraft cardstock and the tab out of whatever colour you want. I went with a yellow/orange colour cardstock. Ink the edges of the banner and tab using Walnut Stain Distress Ink and a blending tool with foam.

Step Six. From the Planner Label die, die cut the 1 3/8″ square label out of black cardstock.

Step Seven. Adhere three of the reinforcements over the three holes at the front of your pocket.

Step Eight. Flip the pocket over and adhere the other three reinforcements over top of the holes on the pocket.

Step Nine. Adhere the tab to the top of the 1 3/8″ square. Foam square the 1 3/8″ square 3/4″ from the right and 1/2″ from the bottom of the pocket.

Step Ten. Adhere the stitched banner to the middle of the 1 3/8″ square. Adhere the inspire word to the middle of the stitched banner.

Step Eleven. Slide in whatever you want in your pocket, I put in a note piece that I made a while back. For some extra reinforcement, I add mini staples to the top left, bottom left, top right and bottom right of the pocket.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Inspire Pocket.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Walnut Stain and Spiced Marmalade
  • Blending Tool with Foam
  • Misc: Kraft Cardstock, Black Cardstock, Yellow/Orange Cardstock and Mini Stapler
Art Journal Collection Elizabeth Craft Designs General Planner Essentials Soft Finish Cardstock

Dream Tag

July 7, 2020

Hey Crafters! Katelyn here, sharing with you my Dream Tag.

To create my Dream Tag, I’ve used a variety of dies, stamps and stencils from Charlene and Ilse’s Art Journal Specials Collection as well as a couple of dies from the Planner Essentials Collection. You’ll want to read below as I share with you how to recreate my tag at home.

Step One. Die cut the small tag from the Planner Essentials 26 – Planner Pocket 3 – Tag & Toppers die out of White Soft Finish Cardstock. Place the Dot Dot Dot… stencil on top of the tag. Using a palette knife with Texture Paste Opaque Matte put the paste through the stencil. Remove the stencil and allow time for the texture paste to dry.

Step Two. Sprinkle Magenta Nuance in Hot Pink, Turquoise and Ocean on the tag. Spritz the powder with water. Allow time to dry. Once the tag has dried, apply Emboss It Ink to one of the background stamps from the Words & Layers stamp set and stamp on the left hand side of the tag. Sprinkle Magical Mysteries – Kiss of The Fairy Embossing Powder over the stamped image. Tap off the excess powder and emboss with a heat tool. Ink the edges of the tag using Black Soot Distress Ink and a blending tool with foam.

Step Three. Die cut the small tag topper from the Planner Essentials 26 – Planner Pocket 3 – Tag & Toppers die out of a piece of book page. Ink the edges of the topper using Black Soot Distress Ink and a blending tool with foam.

Step Four. Choose one of the reinforcements out of the Reinforcement Variety Pack. Die cut one reinforcement out of kraft cardstock. Ink the edges of the reinforcement using Black Soot Distress Ink and a blending tool with foam.

Step Five. Die cut the Street lamp from the Streetlights die out of black cardstock.

Step Six. Die cut both Blooming Branches from the Blooming Branches die out of White Soft Finish Cardstock.

Step Seven. Die cut the single bud from the Budding Florals die out of kraft cardstock. Trim the stem of the bud to your desired length.

Step Eight. From the Morning Letters stamp set, you’ll need the letters to spell the word dream. Apply Jet Black Archival Ink to the letters and stamp onto a piece of White Soft Finish Cardstock. Fussy cut around the word. Ink the edges of the word using Black Soot Distress Ink and a blending tool with foam.

Step Nine. Cut a piece of cheesecloth.

Step Ten. Adhere the book page tag topper to the top of the tag. Adhere the reinforcement over top of the circle at the top of the tag.

Step Eleven. Adhere the cheesecloth piece to the left hand side of the tag as desired. Adhere the street lamp 3/8″ from the left of the tag. Adhere the two blooming branches as desired around the street lamp.

Step Twelve. Foam square the single bud 1/8″ from the left of the tag. Use adhesive and foam squares to adhere the Dream word 3/8″ from the bottom and all the way to the right hand side of the tag.

Step Thirteen. To finish the tag, tie a piece of twine through the top of the tag.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Dream Tag.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Black Soot
  • Blending Tool with Foam
  • Ranger Ink: Jet Black Archival Ink, Emboss It Ink and Texture Paste Opaque Matte
  • Emerald Creek Craft Supplies: Magical Mysteries – Kiss of the Fairy Embossing Powder
  • Magenta Nuance: Hot Pink, Turquoise and Ocean
  • Misc: Black Cardstock, Kraft Cardstock, Book Page, Cheesecloth and Twine
A Way With Words Elizabeth Craft Designs General Els van de Burgt Studio Soft Finish Cardstock

Shoot For The Moon Card

July 4, 2020

Hey Crafters! Katelyn here, sharing with you my Shoot For The Moon Card.

To create my Shoot For The Moon Card, I’ve used a variety of dies and stamps from Suzanne Cannon as well as Els van de Burgt Studio. You’ll want to read below as I share with you how to recreate my card at home.

Step One. Die cut a 4″ Stitched Rectangle out of kraft cardstock.

Step Two. Die cut a 3 1/2″ Stitched Rectangle out of White Soft Finish Cardstock.

Step Three. Die cut a 2 1/2″ Stitched Rectangle out of White Soft Finish Cardstock. From the Soar Collection stamp set, you’ll need the shoot for the moon quote. Apply Jet Black Archival Ink to the stamp and stamp in the middle of the 2 1/2″ stitched rectangle.

Step Four. Die cut the Flourish Frame from the Flourish Frame die out of a piece of black cardstock.

Step Five. Die cut the Stars Spray from the Butterflies & Stars Spray die out of Sunflower Soft Finish Cardstock. Choose a total of nine stars.

Step Six. Adhere the Flourished Frame to the 4″ stitched rectangle.

Step Seven. Foam square the 3 1/2″ stitched rectangle to the middle of the 4″ stitched rectangle.

Step Eight. Place the 2 1/2″ stitched rectangle in the middle of the 3 1/2″ stitched rectangle. Adhere three stars in the top right corner underneath the 2 1/2″ stitched rectangle. Adhere two stars in the bottom left corner underneath the 2 1/2″ stitched rectangle. Adhere the remaining four stars as desired on the 2 1/2″ stitched rectangle. Foam square the 2 1/2″ stitched rectangle to the middle of the 3 1/2″ stitched rectangle.

Step Nine. To finish the card, cut a cardbase out of White Soft Finish Cardstock that measures 4″ x 10 1/2″, score at 5 1/4″. Adhere the cardfront to the cardbase.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Shoot For The Moon Card.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Ranger Ink: Jet Black Archival Ink
  • Misc: Kraft Cardstock and Black Cardstock
Art Journal Collection Joset Designs Planner Essentials Sidekick Essentials Soft Finish Cardstock

Beautiful Sidekick Planner Page

June 25, 2020

Hey Crafters! Katelyn here, sharing with you my Beautiful Sidekick Planner Page.

To create my Beautiful Sidekick Planner Page, I’ve used a variety of dies from the Sidekick and Planner Essentials Collection as well as a couple of dies from Joset Designs and the Art Journal Specials Collection. You’ll want to read below as I share with you how to recreate my sidekick planner page at home.

Step One. Die cut the page from the Sidekick Essentials 3 die out of White Soft Finish Cardstock. Sprinkle Magenta Nuance in Turquoise, Jade and Rosebud on the page as desired. Spritz the powder with water. Once dry, ink the edges of the page using Walnut Stain Distress Ink and a blending tool with foam.

Step Two. Choose one of the reinforcements from the Reinforcement Variety Pack. Die cut the reinforcements out of kraft cardstock. You’ll need a total of six reinforcements. Ink the edges of the reinforcements using Walnut Stain Distress Ink and a blending tool with foam.

Step Three. Die cut the Bubbles die out of a piece of kraft cardstock. Cut the bubbles down to a piece that is 2 3/4″ wide.

Step Four. From the Blooming Branches die, die cut each branch out of a piece of book page.

Step Five. Die cut the heart branch from the Planner Essentials 25 – Double Heart Insert out of Spring Green Soft Finish Cardstock.

Step Six. Die cut the Beautiful Banner from the Sidekick 7 die out of White Soft Finish Cardstock. I didn’t use the positive pieces on the final page. Ink the edges of the banner using Walnut Stain Distress Ink and a blending tool with foam.

Step Seven. Choose three pieces of patterned paper that all coordinate together. From the first patterned paper, die cut the small note piece from the Planner Essentials 21 – Note Pieces die. From the second patterned paper, die cut the small note piece again. From the third patterned paper piece, die cut the curved stitched rectangle out of it. Ink the edges of all three pieces using Walnut Stain Distress Ink and a blending tool with foam.

Step Eight. You’ll need two more patterned papers that go with the previous three. From the first patterned paper, die cut a 3/4″ Stitched Diagonal Fishtail. From the second patterned paper, die cut a 3/8″ Stitched Diagonal Fishtail. Ink the edges of both pieces using Walnut Stain Distress Ink and a blending tool with foam.

Step Nine. Die cut the slotted rectangle from the Sidekick Essentials 5 die out of a piece of vellum.

Step Ten. Choose one more patterned paper that goes with the previous patterned papers. Die cut the stitched rectangle from the Sidekick Essentials 8 out of the patterned paper piece. Ink the edges of the rectangle using Walnut Stain Distress Ink and a blending tool with foam.

Step Eleven. Adhere the reinforcements over top of the circles on the page. Adhere the slotted vellum rectangle piece 7/8″ from the left and 7/8″ from the bottom of the page.

Step Twelve. Adhere the 3/8″ fishtail to the 3/4″ fishtail. Adhere the 3/4″ fishtail 1 3/8″ from the right and 5/8″ from the bottom of the page. Adhere the bubbles to the middle of the slotted rectangle.

Step Thirteen. Adhere one of the small note pieces to the right hand side of the stitched rectangle, making sure 1/4″ is still visible. Foam square the stitched rectangle 7/8″ from the left and 1 3/4″ from the top of the page. Adhere the other note piece 1 1/8″ from the left and 2″ from the top of the page. Adhere the curved rectangle 1 3/4″ from the left and 2 3/8″ from the top of the page.

Step Fourteen. Adhere the two book page branches as desired to the middle of the note piece and curved rectangle. Adhere the heart branch to the middle of the other two branches. Foam square the beautiful banner 7/8″ from the left and 1 5/8″ from the bottom of the page.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Beautiful Sidekick Planner Page.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Walnut Stain
  • Blending Tool with Foam
  • Emerald Creek Craft Supplies: Pam Bray Digital Paper – White Crinkle Abstract
  • Graphic 45: Bloom Collection
  • Magenta Nuance: Turquoise, Jade and Rosebud
  • Misc: Kraft Cardstock, Book Page and Vellum
A Way With Words Elizabeth Craft Designs General Els van de Burgt Studio Soft Finish Cardstock

Good Luck Card

June 6, 2020

Hey Crafters! Katelyn here, sharing with you my Good Luck Card.

To create my Good Luck Card, I’ve used a variety of dies from Suzanne Cannon as well as Els van de Burgt Studio. You’ll want to read below as I share with you how to recreate my card at home.

Step One. Choose a piece of patterned paper. Die cut a 4″ Stitched Rectangle out of the patterned paper. Distress the edges of the rectangle. Using a blending tool with foam, ink the edges of the rectangle with Black Soot Distress Ink.

Step Two. Choose a piece of coordinating patterned paper. Die cut a 3 1/2″ Stitched Rectangle out of the coordinating patterned paper. Distress the edges of the rectangle. Using a blending tool with foam, ink the edges of the rectangle with Black Soot Distress Ink.

Step Three. Die cut the Flourished Frame out of White Soft Finish Cardstock.

Step Four. Choose a piece of coordinating patterned paper. Die cut the Flourished Oval Frame out of the coordinating patterned paper. Using a blending tool with foam, ink the edges of the frame with Black Soot Distress Ink.

Step Five. From the same piece of patterned paper that you’ve die cut the 3 1/2″ rectangle out of, die cut a 2 1/2″ Stitched Oval out of the patterned paper. Distress the edges of the oval. Using a blending tool with foam, ink the edges of the oval with Black Soot Distress Ink.

Step Six. Die cut the Good Luck sentiment out of White Soft Finish Cardstock.

Step Seven. Apply Emboss It Ink to a piece of White Soft Finish Cardstock. Sprinkle Dilly Dilly Lavender Modern Gilding Powder on to the cardstock. Tap off the excess powder and emboss with a heat tool. Apply Emboss It Ink to another piece of White Soft Finish Cardstock. Sprinkle Armenian Pink Modern Gilding Powder on to the cardstock. Tap off the excess powder and emboss with a heat tool. Die cut the Butterflies Spray from the Butterflies & Stars Spray out of the Dilly Dilly Lavender cardstock. Die cut the Butterflies Spray out of the Armenian Pink cardstock. You’ll need a total of nine lavender butterflies and ten pink butterflies.

Step Eight. Adhere the Flourished Frame to the 4″ stitched rectangle. Adhere the 3 1/2″ stitched rectangle to the 4″ stitched rectangle.

Step Nine. Adhere the flourished oval frame to the stitched oval. Foam square the stitched oval to the middle of the 3 1/2″ stitched rectangle. Adhere the Good Luck sentiment to the middle of the flourished oval frame.

Step Ten. Adhere the purple and pink butterflies as desired around the Good Luck sentiment and flourished oval frame.

Step Eleven. Cut a cardbase out of White Soft Finish Cardstock that measures 4 1/4″ x 11″, score at 5 1/2″. Adhere the cardfront to the cardbase.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Good Luck Card.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Quietfire Design: Modern Gilding Powder – Dilly Dilly Lavender and Armenian Pink
  • Graphic 45: Fairie Dust Collection – Daisy Chain, Tiny Toadstools and Moonlit Blooms
  • Ranger Ink: Emboss It Ink
  • Distress Ink: Black Soot
  • Blending Tool with Foam
Art Journal Collection Elizabeth Craft Designs General Joset Designs Soft Finish Cardstock Watercolor Palette

We Are Stronger Together Wall Hanging

June 4, 2020

Hey Crafters! Katelyn here, sharing with you my We Are Stronger Together Wall Hanging.

To create my We Are Stronger Together Wall Hanging, I’ve used a variety of dies, stamps and stencils from the Art Journal Specials Collection as well as a couple of dies from Joset Designs. You’ll want to read below as I share with you how to recreate my wall hanging at home.

Step One. Die cut a 4″ Stitched Rounded Rectangle out of White Soft Finish Cardstock. Place the Spring Flower Mandala Stencil on the left hand side of the rectangle. Use a palette knife and put Texture Paste Opaque Matte through the stencil. Remove the stencil. Allow the stenciled image to dry. Once the image is dry, spray Distress Spray Stain in Cracked Pistachio and Wilted Violet over the stenciled image. Once dry, ink the edges of the rectangle using Black Soot Distress Ink and a blending tool with foam.

Step Two. From a piece of book page, die cut a 4 1/2″ Stitched Rounded Rectangle Die. Ink the edges of the rectangle using Black Soot Distress Ink and a blending tool with foam.

Step Three. Die cut a 1 1/2″ Diagonal Stitched Fishtail out of White Soft Finish Cardstock. Die cut a 1 1/8″ Diagonal Stitched Fishtail out of Book page. Ink the edges of both fishtails out of Black Soot Distress Ink and a blending tool with foam.

Step Four. From the Budding Florals die, die cut the single bud out of black cardstock.

Step Five. From the Blooming Branches die, die cut the heart branch out of a piece of book page.

Step Six. Die cut the the lamp standard from the Streetlights die out of White Soft Finish Cardstock. Apply Emboss It Ink to the lamp standard. Sprinkle Boho Blends – Wrought Iron Embossing Powder over the entire surface of the lamp standard. Tap off the excess powder and emboss with a heat tool.

Step Seven. Die cut the the Bubbles from the Bubbles die out of White Soft Finish Cardstock. Apply Emboss It Ink to the Bubbles. Sprinkle Peppered Chantilly Embossing Powder over the entire surface of the bubbles. Tap off the excess powder and emboss with a heat tool.

Step Eight. From the Budding Florals die. Die cut the bud strip out of kraft cardstock.

Step Nine. Die cut the left hand side of the Ornate Gateway out of White Soft Finish Cardstock. Apply Emboss It Ink to the gate. Sprinkle Hammered Metal Embossing Powder over the entire surface of the gate. Tap off the excess powder and emboss with a heat tool.

Step Ten. Choose one of the girls from the Floral Girls stamp set. Apply Jet Black Archival Ink to the girl stamp and stamp onto a piece of watercolor paper. Colour the girl in using the Watercolor Palette. Once the image has dried, fussy cut the girl out. Ink the edges of the girl using Black Soot Distress Ink and a blending tool with foam.

Step Eleven. Apply Emboss It Ink to the We Are stamp from the Words & Layers stamp and stamp onto a piece of White Soft Finish Cardstock. Apply Emboss It Ink to the stronger together words from the same stamp set and stamp onto the same piece of White Soft Finish Cardstock. Sprinkle Boho Blends – Wrought Iron Embossing Powder over the We Are and stronger together words. Tap off the excess powder and emboss with a heat tool. Fussy cut the We Are out and cut the stronger together into a strip. Ink the edges of the We Are and strip using Black Soot Distress Ink and a blending tool with foam.

Step Twelve. Adhere the 4″ stitched rounded rectangle to the 4 1/2″ stitched rounded rectangle.

Step Thirteen. Adhere the 1 1/2″ fishtail 1/4″ from the left and 1/4″ from the bottom of the 4″ rectangle. Adhere the 1 1/8″ fishtail 3/4″ from the left and 1/2″ from the bottom of the 4″ rectangle. Adhere the bubbles die cut 1/8″ from the left and 1/4″ from the bottom of the 4″ rectangle.

Step Fourteen. Adhere the gate overtop of the bubbles and fishtails. Foam square the bud strip to the middle of the gate. Adhere the light standard and single bud as desired to the middle of the bud strip.

Step Fifteen. Foam square the girl 1″ from the right and 1/2″ from the bottom of the 4″ rectangle. Use foam squares to adhere the We Are words 1″ from the bottom of the 4″ rectangle and close to the girl. Adhere the stronger together word strip 3/8″ from the right and 3/4″ from the bottom of the 4″ rectangle.

Step Sixteen. To finish the wall hanging, punch two holes at the top of the 4″ rectangle. Tie a piece of twine through the top of each hole.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my We Are Stronger Together Wall Hanging.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Black Soot
  • Distress Spray Stain: Cracked Pistachio and Wilted Violet
  • Blending Tool with Foam
  • Ranger Ink: Jet Black Archival Ink, Texture Paste Opaque Matte and Emboss It Ink
  • Emerald Creek Craft Supplies: Peppered Chantilly Embossing Powder, Hammered Metal Embossing Powder and Boho Blends – Wrought Iron Embossing Powder
  • Misc: Black Cardstock, Kraft Cardstock, Book Page and Twine
Elizabeth Craft Designs General Joset Designs Planner Essentials Soft Finish Cardstock Uncategorized

Enjoy This Moment Planner Page

May 21, 2020

Hey Crafters! Katelyn here, sharing with you my Enjoy This Moment Planner Page.

To create my planner page, I’ve used a variety of the dies from the Planner Essentials Collection as well as dies from Joset Designs. You’ll want to read below as I share with you how to recreate my page at home.

Step One. Die cut the ticket page from the Planner Essentials – 11 die out of White Soft Finish Cardstock. Spritz Dylusions Ink Spray in Rose Quartz, Pink Flamingo and Tangerine Dream on the page as desired. Spritz the ink with water and dab the excess ink spray off with a paper towel. Once the page has dried, ink the edges of the page using Black Soot Distress Ink and a blending tool with foam.

Step Two. Choose a piece of patterned paper. Die cut the large banner from the Planner Essentials – 3 die out of the paper. Ink the edges of the banner using Black Soot Distress Ink and a blending tool with foam.

Step Three. From the Diagonal Stitched Fishtails, die cut the 3/4″ fishtail out of a piece of kraft cardstock. Cut the banner down to 2 3/4″. Ink the edges of the fishtail using Black Soot Distress Ink and a blending tool with foam.

Step Four. From the Planner Essentials 14 – Bookmark 1 die, die cut the star reinforcements out of White Soft Finish Cardstock. You’ll need a total of four. Ink the edges of the reinforcements using Black Soot Distress Ink and a blending tool with foam.

Step Five. Die cut two circle wreaths from the Planner Pocket – 2 out of White Soft Finish Cardstock.

Step Six. Die cut the small note piece from the Planner Essentials 21 – Note Pieces die out of the same piece of patterned paper you die cut the banner out of. Die cut the 1 1/2″ note piece out of another piece of patterned paper. Ink the edges of the note pieces using Black Soot Distress Ink and a blending tool with foam.

Step Seven. Choose two labels from the Planner Labels die. Die cut one label out of black cardstock. Die cut the other label from kraft cardstock. Cut one of the labels in half. Ink the edges of the kraft label using Black Soot Distress Ink and a blending tool with foam.

Step Eight. Choose two of the patterns from the Planner Patterns die. Die cut one of the patterns out of black cardstock. Die cut the other pattern out of kraft cardstock.

Step Nine. From the Planner Filmstrip die, die cut the polaroid die with the tab out of a coordinating piece of patterned paper. Ink the edges of all of the pieces using Black Soot Distress Ink and a blending tool with foam.

Step Ten. From the Planner Essentials – 8 die, die cut the Enjoy This Moment words out of kraft cardstock. Die cut the heart out of White Soft Finish Cardstock. Die cut the heart a second time out using the patterned paper you die cut the banner out of. Ink the edges of both hearts using Black Soot Distress Ink and a blending tool with foam.

Step Eleven. Cut a piece of burlap that measures 1 1/2″ x 4″.

Step Twelve. Adhere the star reinforcements over top of the circles on the page. Adhere the kraft pattern piece 1″ from the top and 1 3/4″ from the right of the page.

Step Thirteen. Adhere one of the label halves 5/8″ from the top and 7/8″ from the right of the page. Adhere the small note piece 5/8″ from the right and 1 1/2″ from the bottom of the page. Adhere the burlap piece 7/8″ from the top and 1 1/4″ from the right of the page.

Step Fourteen. Use foam squares to adhere the kraft label 3/4″ from the right and 1 5/8″ from the top of the page. Adhere the 1 1/2″ note piece 3/4″ from the bottom and 1/4″ from the left of the page. Adhere the other half of the label 3/8″ from the bottom and 1/2″ from the left of the page. Adhere the other pattern piece 1″ from the top and 3/8″ from the left of the page.

Step Fifteen. Adhere the banner 1/8″ from the right and 2 1/4″ from the top fo the page. Adhere the two circle wreath as desired over top of one another to the middle of the pattern, note piece and part of the banner.

Step Sixteen. Staple the polaroid pieces together. Adhere the 3/4″ fishtail 1/8″ from the left side of the polaroid frame. Foam square the frame 1 1/4″ from the bottom and 1″ from the right of the page.

Step Seventeen. Adhere the hearts together, making sure the white part of the heart shows underneath the patterned paper heart. Adhere the heart overtop of the fishtail. Adhere the Enjoy This Moment words 1/4″ from the bottom of the polaroid frame. To finish the page, add a staple to the black label halves at the top and bottom of the page.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Enjoy This Moment Planner Page.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Black Soot
  • Dylusions Ink Spray: Rose Quartz, Pink Flamingo, Tangerine Dream
  • Blending Tool with Foam
  • Emerald Creek Craft Supplies: Pam Bray Digital Paper – Pink Crinkle Abstract Paper
  • Alexandre Renke: Patterned Paper
  • Misc: Black Cardstock, Kraft Cardstock, Burlap and Mini Stapler
Art Journal Collection Elizabeth Craft Designs General Planner Essentials Soft Finish Cardstock

Inspire Gift Tag

May 5, 2020

Hey Crafters! Katelyn here, sharing with you my Inspire Gift Tag.

To create my tag, I’ve used a variety of the dies, stamp and stencil from Charlene and Ilse’s Art Journal Specials Collection as well as a couple of dies from the Planner Essentials Collection. You’ll want to read below as I share with you how to recreate my tag at home.

Step One. Die cut the small tag from the Planner Essentials – 2 die out of White Soft Finish Cardstock. Place the stripe portion of the Make Your Mark stencil on the middle of the tag. Using a palette knife, put Texture Paste Opaque Matte through the stencil. Remove the stencil. Once the paste has dried, ink the edges of the tag using Black Soot Distress Ink and a blending tool with foam.

Step Two. Next, you’ll need two coordinating patterned papers. Die cut the small note piece from the Planner Essentials 21 – Note Pieces die out of one of the patterned papers. Die cut the stitched rectangle from the same die out of the second piece of patterned paper. Ink the edges of both pieces, using Black Soot Distress Ink and a blending tool with foam.

Step Three. From the Planner Essentials 21 – Note Pieces die, die cut the curly arrow out of kraft cardstock.

Step Four. From the Blooming Branches die, die cut one branch out of book page and die cut the other branch out of black cardstock.

Step Five. Die cut the stitched label from the Planner Essentials 26 – Planner Pocket 3 – Tags & Toppers out of a third coordinating pattern paper piece. From the same die, die cut the inspire word out of kraft cardstock. Ink the edges of the label using Black Soot Distress Ink and a blending tool with foam.

Step Six. From the Planner Essentials – 8 die, die cut one of the reinforcements out of black cardstock. Cut the reinforcement so that it fits over the circle on the tag and the top ends at the top of the tag.

Step Seven. Apply Jet Black Archival Ink to the leaves stamp from the First Sights of Spring stamp set and stamp onto a piece of watercolour paper. Colour the leaves in using a waterbrush and the Watercolor Palette. Once the image has dried, fussy cut the image out. Ink the edges of the image using Black Soot Distress Ink and a blending tool with foam.

Step Eight. Cut a piece of burlap that measures 1 3/4″ x 3″.

Step Nine. Adhere the reinforcement circle to the tag. Adhere the burlap 1/4″ from the left and 1/4″ from the bottom of the tag.

Step Ten. Adhere the stitched rectangle 3/8″ from the left side and 1/4″ from the bottom of the note piece. Foam square the note piece 3/8″ from the left and 3/8″ from the bottom of the tag. Adhere the arrow to the left hand side of the stitched rectangle.

Step Eleven. Adhere the label 3/4″ from the left and 1/8″ from the bottom of the note piece. Adhere the heart branch to the middle of the label. Adhere the other branch 1/2″ from the left and 1/8″ from the bottom of the note piece.

Step Twelve. Foam square the leaves image to the middle of the branches. Adhere the inspire word to the right hand side of the stitched rectangle and note piece.

Step Thirteen. To finish the tag, tie a piece of twine through the whole the top of the tag.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Inspire Gift Tag.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Black Soot
  • Blending Tool with Foam
  • Ranger Ink: Jet Black Archival Ink and Texture Paste Opaque Matte
  • Graphic 45: Bloom Collection
  • Misc: Black Cardstock, Kraft Cardstock, Book Page, Twine and Burlap
Elizabeth Craft Designs General Joset Designs Planner Essentials Soft Finish Cardstock

You Will Never Know the Value Planner Page

April 28, 2020

Hey Crafters! Katelyn here, sharing with you my You Will Never Know the Value Planner Page.

To create my planner page, I’ve used a variety of the dies from the Planner Essentials Collection as well as dies from Joset Designs. You’ll want to read below as I share with you how to recreate my page at home.

Step One. Die cut the page from the Planner Essentials 27 – Retro Number Trio out of White Soft Finish Cardstock. Cut the page down to 7 1/4″ tall. Spray Distress Spray Stain in Mermaid Lagoon, Abandoned Coral and Cracked Pistachio as desired on the page. Dry the page with a heat tool.

Step Two. From the Patterns 2 Stamp set, you’ll need the bubbles stamp. Apply Jet Black Archival Ink to the stamp and stamp randomly on the page as desired seven times. Reapply ink to the stamp as needed. Ink the edges of the page using Black Soot Distress Ink and a blending tool with foam.

Step Three. Die cut a 1 7/8″ Diagonal Stitched Fishtail out of White Soft Finish Cardstock. Die cut another 1 7/8″ Diagonal Stitched Fishtail out of Misty Mauve Soft Finish Cardstock. Die cut a 3/4″ Diagonal Stitched Fishtail out of a piece of patterned paper. Tear a bit off the top of both 1 7/8″ fishtails. Distress the edges of all three fishtails. Ink the edges of the fishtails using Black Soot Distress Ink and a blending tool with foam.

Step Four. Die cut the 2 3/4″ and 1 1/2″ Note pieces out of book page from the Planner Essentials 21 – Note Pieces die. Distress the edges of the note pieces. Ink the edges of the note pieces using Black Soot Distress Ink and a blending tool with foam.

Step Five. Choose one of the small tag toppers from the Planner Essentials 26 – Planner Pocket 3 – Tag & Toppers out of White Soft Finish Cardstock. Distress the edges of the tag topper. Ink the edges of the tag topper using Black Soot Distress Ink and a blending tool with foam.

Step Six. Choose one of the labels from the Planner Labels. Die cut the label out of patterned paper. Distress the edges of the label. Ink the edges of the label using Black Soot Distress Ink and a blending tool with foam.

Step Seven. From the Planner Essentials – 2 die, die cut the small tag out of patterned paper. Distress the edges of the tag. Ink the edges of the tag using Black Soot Distress Ink and a blending tool with foam.

Step Eight. Die cut the tag from the Planner Essentials -4 die out of patterned paper. Distress the edges of the tag. Ink the edges of the tag using Black Soot Distress Ink and a blending tool with foam.

Step Nine. Die cut the diamond pattern from the Planner Patterns die out of black cardstock.

Step Ten. From the Planner Essentials 24 – Photo Frame Page die, die cut the film strip out of black cardstock.

Step Eleven. Die cut the heart from the Planner Essentials – 8 die out of White Soft Finish Cardstock. Distress the edges of the heart. Ink the edges of the heart using Black Soot Distress Ink and a blending tool with foam.

Step Twelve. From the Planner Essentials 20 – Half Heart Page Set die, die cut the plain lightbulb out of White Soft Finish Cardstock. Die cut the heart lightbulb out of Misty Mauve Soft Finish Cardstock. Distress the edges of the lightbulbs and heart. Ink the edges of the lightbulbs and heart using Black Soot Distress Ink and a blending tool with foam.

Step Thirteen. Choose on of the reinforcements from the Reinforcement Variety Pack. Die cut the reinforcement out of White Soft Finish Cardstock. You’ll need a total of six. Ink the edges of the reinforcements using Black Soot Distress Ink and a blending tool with foam.

Step Fourteen. From the Important Memo Stamp Set, you’ll need the You Will Never Know The Value quote. Apply Jet Black Archival Ink to the quote and stamp onto a piece of White Soft Finish Cardstock. Cut the quote into eleven strips. Ink the edges of the strips using Black Soot Distress Ink and a blending tool with foam.

Step Fifteen. Adhere the reinforcement pieces over top of the circles on the page.

Step Sixteen. Foam square the white 1 7/8″ fishtail 1 1/4″ from the right and 3/4″ from the top of the page. Adhere the other fishtail 1 5/8″ from the left and 1″ from the top of the page. Adhere the 2 3/4″ note piece 1 1/8″ from the left and 1 1/2″ from the top of the page.

Step Seventeen. Adhere the diamond pattern piece to the middle of the note piece. Adhere the 3/4″ fishtail 2 1/4″ from the left and 1 1/4″ from the top of the page. Adhere the tag topper 7/8″ from the right and 2″ from the top of the page.

Step Eighteen. Foam square the large tag 1 1/8″ from the right and 1 3/4″ from the top of the page. Adhere the small tag to the bottom of the large tag. Make sure the hole of the tag sits at the bottom of the large tag.

Step Nineteen. Staple the filmstrip 1/4″ from the left of the 1 1/2″ note piece at the top and bottom. Adhere the 1 1/2″ note piece 1 1/4″ from the left and 1 5/8″ from the bottom of the page. Adhere the white heart 1/2″ underneath of the left hand side of the label. Adhere the label 1 1/2″ from the right and 2 1/4″ from the top of the page.

Step Twenty. Adhere the heart lightbulb to the plain lightbulb. Staple the heart to the bottom right side of the heart lightbulb. Foam square the lightbulb 1 1/2″ from the right and 2 1/2″ from the top of the page.

Step Twenty One. Adhere the You Will Never Know quote to the right hand side of the lightbulb and heart as desired. To finish the page, add a staple in the bottom right of the large tag and top left of the large tag.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my You Will Never Know the Value Planner Page.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Black Soot
  • Distress Spray Stain: Abandoned Coral, Cracked Pistachio and Mermaid Lagoon
  • Blending Tool with Foam
  • Ranger Ink: Jet Black Archival Ink
  • Prima Marketing: Patterned Paper
  • Misc: Black Cardstock, Kraft Cardstock, Book Page and Mini Stapler
%d bloggers like this: