Browsing Tag

100 lb White Soft Finish Cardstock

Charlene Stamps Elizabeth Craft Designs General Els van de Burgt Studio Joset Designs Planner Essentials Soft Finish Cardstock Uncategorized

Bloom Card

April 15, 2020

Hey Crafters! Katelyn here, sharing with you my Bloom Card.

To create my card, I’ve used a variety of the new dies and stamps from Charlene and Ilse’s Art Journal Specials Collection as well as a couple of dies from the Planner Essentials Collection, Joset Designs and Els van de Burgt Studio. You’ll want to read below as I share with you how to recreate my card at home.

Step One. Die cut a 4 1/4″ Stitched Square out of White Soft Finish Cardstock. Place the Story Telling stencil to the left hand side of the square and put Texture Paste Opaque Matte through the stencil with a palette knife as much or as little as desired. Once the paste has dried, distress the edges of the square. Ink the edges of the square using Black Soot Distress Ink and a blending tool with foam.

Step Two. Die cut a 4 3/4″ Stitched Square out of a piece of book page. Distress the edges of the square. Ink the edges of the square using Black Soot Distress Ink and a blending tool with foam.

Step Three. Die cut a 2″ Stitched Circle out of White Soft Finish Cardstock. Cut the circle down to 1 1/2″. Die cut a 1 1/2″ Stitched Circle out of a piece of patterned paper. Cut the circle down to 1 1/4″. Distress the edges of the circles. Ink the edges of the circles using Black Soot Distress Ink and a blending tool with foam.

Step Four. Die cut a 3/4″ Diagonal Stitched Fishtail out of White Soft Finish Cardstock. Cut the fishtail down to 2 1/2″. Apply Jet Black Archival Ink to the Bloom sentiment from the A Field of Flowers stamp set and stamp onto the fishtail. Distress the edges of the fishtail. Ink the edges of the fishtail using Black Soot Distress Ink and a blending tool with foam.

Step Five. Die cut the Mandala out of a piece of kraft cardstock. Cut the Mandala down to 2 1/2″.

Step Six. Die cut the Blooming Branch from the Blooming Branches die and die cut the branch out of cream cardstock.

Step Seven. From the Planner Essentials 24 – Photo Frame die, die cut the film strip out of a piece of black cardstock. Trim the filmstrip down to 3 1/8″.

Step Eight. From the Planner Essentials 24 – Photo Frame die, die cut the arrow strip out of a piece of pattern paper. Ink the edges of the strip using Black Soot Distress Ink and a blending tool with foam.

Step Nine. Apply Jet Black Archival Ink to the flower branch from the First Sights of Spring stamp set and stamp onto a piece of watercolour paper. Colour the flower branch using the Watercolor Palette and a waterbrush. Fussy cut the flower branch out.

Step Ten. Cut a small piece of cheesecloth.

Step Eleven. Adhere the 4 1/4″ stitched square to the 4 3/4″ stitched square.

Step Twelve. Adhere the mandala to the left hand side of the 4 1/4″ stitched square. Adhere the 1 3/4″ stitched circle to the middle of the mandala. Adhere the 1 1/4″ stitched circle to the 1 3/4″ stitched circle.

Step Thirteen. Staple the arrow strip to the film strip in two sections as desired. Adhere the bloom fishtail 1/2″ from the bottom and 1″ from the left of the 4 1/4″ square. The fishtail will sit slightly underneath the circles. Adhere the arrow strip and film strip to the middle of the circles.

Step Fourteen. Adhere the cheesecloth to the middle of the arrow strip and films trip. Adhere the bloom branch to the middle of the cheesecloth.

Step Fifteen. Foam square the flower branch as desired overtop of the bloom branch.

Step Sixteen. To finish the card, cut a piece of White Soft Finish Cardstock that measures 4 3/4″ x 9 1/2″, score at 4 3/4″. Adhere the cardfront to the cardbase.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Bloom Card.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Black Soot
  • Blending Tool with Foam
  • Ranger Ink: Jet Black Archival Ink and Texture Paste Opaque Matte
  • Graphic 45: Bloom Collection
  • Misc: Black Cardstock, Kraft Cardstock, Book Page, Cream Cardstock, Mini Stapler and Cheesecloth
A Way With Words Cardmaking Elizabeth Craft Designs General Els van de Burgt Studio Soft Finish Cardstock

Love Card

February 1, 2020

Hey Crafters! Katelyn here! With only 13 days until Valentine’s Day, it’s the perfect time to start thinking about creating those special cards for loved ones. So, today, I’m sharing with you my Love Card.

To create my card, I’ve used a variety of dies from Suzanne Cannon! To compliment the products from Suzanne Cannon, I’ve also used dies from Els van de Burgt Studio. Read below as I have a tutorial for you on how to recreate my card.

Step One. Choose three Valentine’s Day themed patterned paper. From the first paper, die cut 4″ Stitched Rectangle. From the second paper, die cut a 3 1/2″ Stitched Rectangle. From the third paper, die cut a 2 1/2″ Stitched Rectangle. Distress the edges of papers. Ink the edges of the papers using Black Soot Distress Ink and a blending tool with foam.

Step Two. Die cut a 3″ Stitched Rectangle out of White Soft Finish Cardstock. Distress the edges of the rectangle. Ink the edges of the rectangle using Black Soot Distress Ink and a blending tool with foam.

Step Three. From the Love, Joy & Peace Christmas Ornament, you’ll need the love word. Die cut the word out of White Soft Finish Cardstock.

Step Four. From the Flourished Frame Die, die cut the frame out of White Soft Finish Cardstock.

Step Five. Die cut the Flourished Oval Frame out of White Soft Finish Cardstock. Apply Emboss It Ink to the frame and sprinkle Gothic Black Modern Gilding Powder over the entire surface of the frame. Tap off the excess powder and emboss with a heat tool.

Step Six. From the Entwined Hearts die, die cut the set of three heart three times out of White Soft Finish Cardstock. Using a blending tool with foam, blend Candied Apple Distress Oxide Ink over the entire surface of four hearts. Using a blending tool with foam, blend Worn Lipstick Distress Oxide Ink over the entire surface of five hearts. Ink the edges of the hearts using Black Soot Distress Ink and a blending tool with foam.

Step Seven. Adhere the Flourished Frame to the 4″ Stitched Rectangle. Adhere the 3 1/2″ Stitched Rectangle to the middle of the 4″ Stitched Rectangle.

Step Eight. Foam square the 3″ Stitched Rectangle to the middle of the 3 1/2″ Stitched Rectangle. Adhere the 2 1/2″ Stitched Rectangle to the middle of the 3″ Stitched Rectangle.

Step Nine. Adhere the Flourished Frame to the middle of the 2 1/2″ Stitched Rectangle. Adhere the Love sentiment to the middle of the Flourished Frame.

Step Ten. Adhere the hearts around the Flourished Oval Frame and sentiment as desired. Cut a cardbase out of White Soft Finish Cardstock that measures 5 1/4″ x 8″, score at 4″. Adhere the cardfront to the cardbase.

Thank you for joining me today! I hope that I’ve inspired you to create your own version of my Love Card.

Katelyn

<!-- LinkDeli Code Start --><!-- Thursday 16th of January 2020 11 58  --><a class="linkdeli-image" target=_blank href="https://linkdeli.com/view/5738b3fa-efc4-45b6-a2b1-6265f6d87eb6" rel="nofollow"><img src="https://linkdeli.s3.amazonaws.com/public/placeholders/5738b3fa-efc4-45b6-a2b1-6265f6d87eb6.jpg"></a>
<script class="linkdeli-widget" data-campaign="5738b3fa-efc4-45b6-a2b1-6265f6d87eb6" src="https://linkdeli.com/widget.js?1559654439292" async="true"></script><!-- LinkDeli Code End -->

Other:

  • Distress Ink: Black Soot
  • Distress Oxide Ink: Candied Apple and Worn Lipstick
  • Blending Tool with Foam
  • Ranger Ink: Emboss It Ink
  • Simple Stories: Kissing Booth – Crazy For You, Smitten and Love & Adore
Elizabeth Craft Designs General Planner Essentials Soft Finish Cardstock Stamping

Planner Insert: Life Is A Collection Of Moments

January 7, 2020

Hey Crafters! Katelyn here, sharing with you my Life is a Collection of Moments Planner Insert.

I love crafting with the Planner Essentials Collection of stamps and dies to create fabulous mixed media pages and inserts for my planners.

You’ll want to read below as I have a tutorial for you on how to recreate my insert at home!

Step One. Die cut the insert from the Planner Essentials – 5 die out of White Soft Finish Cardstock. On a clear stamp block, randomly put Wilted Violet, Cracked Pistachio and Mermaid Lagoon Distress Oxide Ink. Spritz the block with water and then stamp onto the insert. Dry the insert with a heat tool. Apply Jet Black Archival Ink to the splatter stamp from the Background Stamps 2 and stamp randomly on the insert. Reapply ink to the stamp as needed.

Step Two. Apply Emboss It Ink to the random equation stamp from the Background Stamps 3 and stamp randomly onto the insert. Reapply ink to the stamp as needed. Sprinkle Boho Blends – Turkish Bronze Embossing Powder over the stamped areas. Tap off the excess powder and emboss with a heat tool. Distress the edges of the insert. Ink the edges of the insert using Black Soot Distress Oxide Ink and a blending tool with foam.

Step Three. From the Planner Essentials – 5 die, die cut two reinforcements out of White Soft Finish Cardstock. Apply Jet Black Archival Ink to the splatter stamp and stamp randomly on each reinforcement. Ink the edges of the reinforcements using Black Soot Distress Oxide Ink and a blending tool with foam.

Step Four. From the Moments of Life stamp set, you’ll need the life is a collection sentiment. Apply Jet Black Archival Ink to the sentiment and stamp onto a piece of White Soft Finish Cardstock. Cut the sentiment into three strips. Ink the edges of each strip using Black Soot Distress Ink and a blending tool with foam.

Step Five. From the same stamp set, you’ll need the two circles. Apply Jet Black Archival Ink to each circle and stamp onto a piece of White Soft Finish Cardstock. Fussy cut each circle out. Ink the edges of each circle using Black Soot Distress Oxide Ink and a blending tool with foam.

Step Six. The last elements from the Moments of Life stamp set you’ll need are the two stars. Apply Mermaid Lagoon Distress Oxide Ink to the large star and small star and stamp onto a piece of White Soft Finish Cardstock. Reapply Mermaid Lagoon Distress Oxide Ink to the large star and stamp onto the same piece of White Soft Finish Cardstock. Apply Wilted Violet Distress Oxide Ink to the large star and small star and stamp onto the same piece of White Soft Finish Cardstock. Apply Cracked Pistachio Distress Oxide Ink to the large star and small star and stamp onto the same piece of White Soft Finish Cardstock. Fussy cut all of the stars out. Ink the edges of all of the stars using Black Soot Distress Oxide Ink and a blending tool with foam.

Step Seven. Adhere the reinforcement circles over top of the circles on the insert. Foam square the large circle to the middle left of the insert. Use adhesive and foam squares to adhere the small circle to the bottom right of the large circle.

Step Eight. Adhere the sentiment strips to the right side of the circles as desired.

Step Nine. To finish your insert, adhere the seven stars as desired onto the insert.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Life is a Collection of Moments Planner Insert.

Katelyn

Other:

  • Distress Oxide Ink: Black Soot, Cracked Pistachio, Mermaid Lagoon and Wilted Violet
  • Blending Tool with Foam
  • Ranger Ink: Emboss It Ink and Jet Black Archival Ink
  • Emerald Creek Craft Supplies: Boho Blends – Turkish Bronze Embossing Powder
Inspiration from the Design Team Joset Designs Krista Schneider Soft Finish Cardstock Stamping

Winter Sweater Tag

December 22, 2019

Hi there, it’s Tanja here and today! I would like to show you how to turn the Winter Sweater die set into a tag –– perfect for your holiday gift giving!

Step 1: Die Cutting

  • Die cut all the elements for the winter sweater from white Soft Finish Cardstock

Step 2: Stamping

  • Stamp one of the adorable little snowmen from the Snowman & Gifts set with black ink

Step 3: Coloring

  • Color the image and the background with Alcohol Markers and add extra shading with pencils

Step 4: Turn the die into a Tag

  • Punch a hole at the top of the sweater and thread a piece of twine through it
  • Cover the background with patterned paper
  • Add some stamping

Have a Christmas-y Day!

Hugs,

Other
Alcohol Marker
Faber-Castell Polychromos pencils
hole punch
twine
patterned paper
Memento Tuxedo Black

Cardmaking Charlene Stamps Soft Finish Cardstock Stamping

Rainbow Flower Card

October 10, 2019

Hi there,

It’s Tanja here and I would like to show you how to create this rainbow flower card step by step.

Step 1: Die Cutting and Stamping

  • die cut one of the Stitched Rectangles from white Soft Finish Cardstock
  • stamp the flower from the Field of Flowers set with Memento Espresso Truffle – I stamp on the non-textured side, if I want to color with Alcohol Markers and Pencils

Step 2: Coloring and Adding Texture

  • color the flower with Alcohol Markers and add extra shading with Faber-Castell Polychromos pencils
  • add highlights with a white gel pen
  • cover the buds with Nuvo Crystal Glaze for shine and dimension
  • stamp some numbers from the Background Stamps 2 set with Archival Ink Watering Can
  • add some splatters with watered-down black acrylic paint

Step 3: Finishing Touches

  • add a black panel underneath the flower panel before adhering it to a white cardbase

Have fun creating.

Hugs,

Other
Memento Espresso Truffle
Alcohol Marker
Faber-Castell Polychromos Pencils
white gel pen
black cardstock
Archival Ink Watering Can
black acrylic paint

Joset Designs

For A Special Girl

July 2, 2019

Hi there,

It’s Tanja here and I created this sweet elephant card for a very special little girl using products from Joset’s new collection!

Step 1: Die Cutting

  • Die cut all the elements necessary from white Soft Finish Cardstock using dies from the Elephant and Cat sets

Step 2: Coloring and Assembly

  • Color the elements using Alcohol Markers
  • Add extra shading with Distress Ink (Black Soot, Worn Lipstick)
  • Assemble the adorable little elephant
  • Add highlights to the eyes with a white gel pen and blush to the cheeks with a Pitt Pastel Pencil

Step 3: Creating a Background

  • Cut out a rectangle from watercolor paper
  • Apply Distress Ink Worn Lipstick through a stencil
  • Add a strip of washi tape to the bottom left corner
  • Stamp the sentiment from the Build your own Sentiments 1 set at the top right with Altenew Crisp Ink Galactic Storm

Step 4: Putting Everything Together

  • Use clear double-sided adhesive and double-sided foam adhesive to adhere all the elements to the background panel
  • Add a strip of grey cardstock and a strip of glitter paper to the left side of the panel before gluing it down onto a white card base

I hope you got inspired.

Hugs,

Other
Alcohol Markers
Distress Ink (Black Soot, Worn Lipstick)
Mini Ink Blending Tool
Washi Tape
Stencil
Altenew Crisp Ink Galactic Storm
grey cardstock
glitter paper

Elizabeth Craft Designs General Els van de Burgt Studio Planner Essentials Soft Finish Cardstock

Create Your Own Water-Habit Tracker Page

June 20, 2019

Hey Crafters! Katelyn here, sharing with you my Water – Habit Tracker Page for inside my planner for the month of June.

To create my habit tracker page, I’ve used a variety of dies from the Planner Essentials and Els van de Burgt Studio. I hope you enjoy my tutorial!

Step 1. Start by die cutting the planner page out of White Soft Finish Cardstock from the Planner Essentials – 9 die. Sprinkle Magenta Nuance Rosebud, Aquamarine and Jade powder over the page. Spritz the page with water. Once the page has dried, apply Jet Black Archival Ink to the honeycomb stamp and stamp randomly on the page. Repeat the previous step for stamping the honeycomb eight more times. Ink the edges of the page using Black Soot Distress Ink and a blending tool with foam.

Step Two. Die cut the 1,2,3,4,5 label from the Planner Labels die out of Kraft cardstock. Apply Jet Black Archival Ink to the Habit Tracker stamp and stamp onto the kraft cardstock label. Apply Jet Black Archival Ink to the Weekly Stamp and stamp onto a piece of Soft White Finish Cardstock. Repeat the previous step with stamping the Weekly Stamp onto the White Soft Finish Cardstock, making sure to leave a bit of room in between each Weekly word. Using the 3/8″ Stitched Fishtail Banner, die cut each Weekly word out. Use a black gel pen to add the dates on each weekly banner. Ink the edges of the banners and label out of Black Soot Distress Ink and a blending tool with foam.

Step 3. Apply Jet Black Archival Ink to the Water tracking stamp and stamp onto a piece of White Soft Finish Cardstock. Repeat the previous step eleven more times on the same piece of White Soft Finish Cardstock. Ink the edges of the squares using Black Soot Distress Ink. Colour in the water drops for the water that has been consumed.

Step 4. Adhere the Habit Tracker label 3/8″ above the page. Adhere the Weekly banners as desired on the page.

Step 5. Adhere three of the water drop squares under each weekly banner.

Step 6. To finish off the page, use a white gel pen to highlight some of the edges of the honeycombs.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Water – Habit Tracker Page.

Katelyn

Elizabeth Craft Designs Supplies:

https://linkdeli.com/widget.js?1559654439292

Other:

  • Distress Ink: Black Soot
  • Magenta Nuance: Aquamarine, Rosebud and Jade
  • Blending Tool with Foam
  • Jet Black Archival Ink
  • Black Gel Pen
  • White Gel Pen
  • Kraft Cardstock
Elizabeth Craft Designs General Els van de Burgt Studio Joset Designs ModaScrap Peel-Off Stickers Soft Finish Cardstock

How To Make This Mother’s Day Gift Box

May 6, 2019

Hey Crafters! Katelyn here, sharing with you my Happy Mother’s Day Gift Box. Mother’s Day is only 6 days away, so why not make a pretty gift box for that gift for mom?

To create this gift box, I’ve used dies and patterned paper from ModaScrap as well as dies from Joset Designs. I hope that you enjoy my tutorial!

Step 1. Choose a piece of patterned paper from the ModaScrap – Butterfly Dream Paper Pack. Die cut the Star Pillow Box die out of the patterned paper piece. Ink the edges of the box using Ground Espresso Distress Ink and a blending tool with foam.

Step 2. From the Words 3 – Happy Holidays die, die cut the “Happy Mother’s Day” sentiment out of White Soft Finish Cardstock.

Step 3. Die cut three Leafy Branch 2 out of White Soft Finish Cardstock. Using a blending tool with foam, blend Shabby Shutters Distress Ink over the entire surface of each leafy branch. Trim the branches to your desired length.

Step 4. Choose two of the Happy Flowers. Die cut the two Happy Flowers twice out of White Soft Finish Cardstock. Using a blending tool with foam, bend Picked Raspberry Distress Ink over the entire surface of the happy flowers.

Step 5. Assemble your Star Pillow Box.

Step 6. Adhere two of the happy flowers together and finish off the center of the flower with a Transp. Glitter/Gold Dots. Adhere the last two happy flowers together and finish off the center of the flower with a Transp. Glitter/Gold Dots.

Step 7. Start by adhering two of the leafy branches on the left hand side of the star pillow box. Adhere the two happy flowers overtop of the leafy branches.

Step 8. To finish off the pillow box, adhere the Happy Mother’s Day sentiment to the right hand side of the pillow box.

Thanks for joining me today. I hope that I’ve inspired you to create your own version of my Happy Mother’s Day Gift Box.

Katelyn

Elizabeth Craft Designs Supplies:

https://linkdeli.com/widget.js?1552642647875

Other:

  • Distress Ink: Ground Espresso, Picked Raspberry and Shabby Shutters
  • Blending Tool with Foam
Elizabeth Craft Designs General Joset Designs ModaScrap Soft Finish Cardstock

How To Create This Happy Spring Card

April 24, 2019

Hey Crafters! Katelyn here, sharing with you my Happy Spring Card. Spring is definitely here on the west coast of Canada and has been providing a ton of inspiration for my projects these days.

To create this card, I’ve used dies and patterned paper from ModaScrap as well as a stamp set from Joset Designs. I hope that you enjoy my tutorial!

Step 1. From the Blue Cotton Candy Paper Pack, you’ll need the white flower kraft patterned paper. Die cut the 4″ Dashing Rectangle out of the patterned paper piece. Ink the edges of the paper using Black Soot Distress Oxide Ink and a blending tool with foam.

Step 2. Die cut the 3 1/2″ Dashing Rectangle out of the White Soft Finish Cardstock. Sprinkle Aquamarine and Jade Magenta Nuance lightly in the middle of the rectangle piece. Spritz the powder with water. Once the paper has dried, ink the edges of the paper using Black Soot Distress Oxide Ink and a blending tool with foam.

Step 3. Die cut the 2 1/4″ Dashing Circle out of White Soft Finish Cardstock. Apply Cottage Ivy Memento Ink to the branch stamp from the Wedding Sentiments stamp set and start stamping in the circle. Reapply ink the branch as many time as needed to complete a circle of branches.

Step 4. Apply Onyx Black Versafine Ink to the Happy Spring stamp from the Spring Sentiments stamp set and stamp in the center of the circle. Add a Transp.Glitter/Gold Dot in between each stamped branch in the circle. Ink the edges of the circle using Black Soot Distress Oxide Ink and a blending tool with foam.

Step 5. From the Wood Effect Paper Pack, you’ll need to choose one of the wood patterned papers. Die cut the 2 3/4″ Dashing Circle out of the patterned paper piece. Ink the edges of the paper using Black Soot Distress Oxide Ink and a blending tool with foam.

Step 6. Die cut the Lace card out of White Soft Finish Cardstock. Cut the Lace card down to 4″.

Step 7. Die cut the three Dragonflies out of White Soft Finish Cardstock. Lightly sprinkle Jade and Aquamarine Magenta Nuance powder overtop of the dragonflies. Spritz the powder with water.

Step 8. Adhere the 3 1/2″ Dashing Rectangle piece to the 4″ Dashing Rectangle piece. Adhere the lace card element to the left hand side of the 4″ Dashing Rectangle.

Step 9. Adhere the Happy Spring circle to the wood circle. Foam square the wood circle 1 1/8″ from the left and 3/4″ from the top of the 4″ Dashing Rectangle.

Step 10. Adhere the dragonflies as desired around the Happy Spring circle. To finish off the card, cut a cardbase out of White Soft Finish Cardstock that measures 4″ x 10 1/2″, score at 5 1/4″. Adhere the card front to the card base.

Thanks for joining me today. I hope that I’ve inspired you to create your own version of my Happy Spring Card.

Katelyn

Elizabeth Craft Designs Supplies:

https://linkdeli.com/widget.js?1552642647875

Other:

  • Magenta Nuance: Jade and Aquamarine
  • Distress Oxide Ink: Black Soot
  • Blending Tool with Foam
  • Versafine: Onyx Black
  • Memento Ink: Cottage Ivy
Joset Designs

How To Create This Happy Easter Chick

March 24, 2019

Hi there,

It’s Tanja here, sharing the step-by-step tutorial for this sweet Easter card. Joset’s new collection contains three new Easter/Spring die sets, including the Little Chick that is featured in this project!

Step 1: Die Cutting

  • Cut out chick and some eggs from white Soft Finish Cardstock with the help of the Little Chick die set

Step 2: Coloring

  • Color the parts with Alcohol Markers
  • Add shading and speckles with Distress Inks (I used Wild Honey, Dusty Concord, Hickory Smoke, Picked Raspberry, Peacock Feathers, Broken China) and highlights with a white gel pen
  • Assemble the chick

Step 3: Create the Background

  • Cut out a background panel using one of the Dashing Rectangles dies
  • Cut another rectangle from green cardstock and turn it into a grass border using the Adventure Edges die set
  • Add some clouds with the help of the Cloud and Grass Stencil, Distress Ink Tumbled Glass and a Mini Ink Blending Tool

Step 4: Final Steps

  • Stamp the sentiment from the Spring Sentiments Stamp Set with Versafine Smokey Gray
  • Adhere all the elements to the card panel
  • Mount the panel onto a kraft cardbase

I hope this project inspired you to create your own!

Have a wonderful day.

Hugs,

Supply List:

Other
Distress Ink (Wild Honey, Dusty Concord, Hickory Smoke, Picked Raspberry, Peacock Feathers, Broken China, Tumbled Glass)
Mini Ink Blending Tool
green cardstock
Versafine Smokey Gray
kraft cardstock

%d bloggers like this: